

Eprom Writer
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 81
- Pads
- 142
- Tracks, vias
- 70, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Aug 2023
- Updated
- 17 Aug 2023
Overview
Eprom Writer is an open-source printed circuit board by jakabandras, from the jakabandras/Eprom-Writer repository on GitHub. It is a 2-layer board with 27 parts on 81 nets, routed with 70 tracks and 0 vias.
It is built around the 74LS367PC, MC34063AP and 4609X-101-103LF. Its parts include 7 capacitors, 5 ICs, 5 diodes, 3 resistors and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
374LS367PC
PDIP-16Buffers, Drivers, Receivers, TransceiversTexas InstrumentsMC34063AP
PDIP-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters4609X-101-103LF
SIP-9-2.54mm10kΩ 200mW 8 9 ±100ppm/℃ ±2% SIP-9-2.54mm Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C4 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D5 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 2 | 74LS367 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U1, U2 |
| 2 | Jumper_3_Bridged12 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | JP1, JP2 |
| 1 | 0.33/10W | Resistor_THT:R_Radial_Power_L11.0mm_W7.0mm_P5.00mm | R5 |
| 1 | 1.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 100uH | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | L1 |
| 1 | 1n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R4 |
| 1 | 3.3u | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C5 |
| 1 | 33u | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C7 |
| 1 | 4609X-101-103LF | AndrewLib:SIP249W50P254L2281H508Q9 | RN1 |
| 1 | 47u/35v | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | ESP32_NODEMCU | AndrewLib:MODULE_ESP32_NODEMCU | U5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MC34063AP | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | RED | LED_THT:LED_D5.0mm | D6 |
Similar boards
- 4 layers290 × 215 mm

- 4 layers100 × 79 mm

ESP32 Interface
dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.
114 parts1LGPL-2.1 - 2 layers76.2 × 83.8 mm

Neotron Expansion Template
Neotron-Compute/Neotron-Expansion-Template
Example Neotron Expansion card
28 parts1 - 2 layers250 × 72 mm

- 2 layers170 × 105 mm

Ssio check
paulbruneau/ssio-check
A bench tester for the Bally/Midway MCR Sound I/O family: the 90908 Sound I/O and the 90913 / 91483 / 91657 Super Sound I/O (Z80, two AY-3-8910s, and all of the game's input ports).
72 parts - 2 layers200 × 150 mm

- 2 layers104 × 73 mm

- 2 layers72.9 × 78 mm

Questions
What parts does the Eprom Writer use?
27 parts, built around the 74LS367PC, MC34063AP and 4609X-101-103LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eprom Writer KiCad files?
From the jakabandras/Eprom-Writer repository on GitHub, at the commit this page was made from: the board is src/PCB_KICAD/EpromWriter/EpromWriter.kicad_pcb and its schematic src/PCB_KICAD/EpromWriter/EpromWriter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eprom Writer design in my own project?
Its repository states no licence, so its author keeps all rights: ask jakabandras before reusing the design.