Skip to the content
12345678

MC34063AP

Texas InstrumentsExtended

0℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHS

Part id
ti/MC34063AP
Category
DC DC Converters
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C2872816)
Used on
39 open-source boards

Overview

The MC34063AP is a DC DC Converter made by Texas Instruments in a PDIP-8 package with 8 pins. 0℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:MC34063AP, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2872816). 39 open-source boards in 33 repositories on GitHub use it.

Symbol

1SwC2SwE3TC4GND5Vfb6Vin7Ipk8DC
Regulator_Switching:MC34063APFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the MC34063AP
PinNameType
1SwCOpen collector
2SwEOpen emitter
3TCPassive
4GNDPower in
5VfbInput
6VinPower in
7IpkInput
8DCOpen collector

Open-source boards using it

39See all 39
  • 2 layers200 × 150 mmMSX ONE, the printed circuit board in 3D

    MSX ONE

    jdgabbard/MSX-ONE-Computer

    MSX 1 Computer from discrete parts

    114 parts28GPL-3.0
  • 2 layers104 × 73 mmArdf tx, the printed circuit board in 3D

    Ardf tx

    hmatuschek/ardf-tx

    Schematics and firmware for simple ARDF transmitter.

    55 parts5
  • 2 layers72.9 × 78 mmZener tester, the printed circuit board in 3D

    Zener tester

    dilshan/simple-zener-tester

    PIC16F88 and MC34063 based Zener diode tester

    53 parts4MIT
  • 2 layers75 × 40 mmBoost converter, the printed circuit board in 3D

    Boost converter

    fabianmink/MarbleAccelerator

    An accelerator / coilgun for metallic marbles

    30 parts1BSD-2-Clause
  • 2 layers80 × 60 mmIoT Led v1, the printed circuit board in 3D

    IoT Led v1

    pawel2000pl/LedDriverIoT

    IOT led driver dedicated for ESP32C3

    73 parts1
  • 4 layers240 × 70 mmNixie, the printed circuit board in 3D

    Nixie

    Synthron/Nixie

    A Nixie Clock with Z5600M and ESP32

    324 parts1
  • 2 layers85 × 55 mmBadge, the printed circuit board in 3D

    Badge

    cookiemonsternz/fallout-badge

    A badge with holes for mounting to a lanyard, containing within a full miniature analogue synthesizer / sequencer.

    50 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the MC34063AP?

Yes. The symbol is Regulator_Switching:MC34063AP and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MC34063AP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MC34063AP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the MC34063AP?

JLCPCB lists it as part C2872816, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MC34063AP?

Parts like it in the library: the MC33063AP by Texas Instruments, the LT1372CN8#PBF by Analog Devices, the LT1372HVCN8#PBF by Analog Devices and the LT1373CN8#PBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MC34063AP?

39 boards in 33 repositories on GitHub; the most starred are listed on this page, with their KiCad files.