Skip to the content
12345678

MC33063AP

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHS

Part id
ti/MC33063AP
Category
DC DC Converters
Package
PDIP-8
Pins
8
In stock
3,000 at JLCPCB (C2865301)
Used on
6 open-source boards

Overview

The MC33063AP is a DC DC Converter made by Texas Instruments in a PDIP-8 package with 8 pins. -40℃~+85℃@(TA) 1 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:MC33063AP, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 3,000 are in stock at JLCPCB (part C2865301). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1SwC2SwE3TC4GND5Vfb6Vin7Ipk8DC
Regulator_Switching:MC33063APFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the MC33063AP
PinNameType
1SwCOpen collector
2SwEOpen emitter
3TCPassive
4GNDPower in
5VfbInput
6VinPower in
7IpkInput
8DCOpen collector

Open-source boards using it

6
  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers80 × 53.6 mmPCB Pump, the printed circuit board in 3D

    PCB Pump

    im-alexis/Capstone-Project

    Team Members: Javier Padilla, Alexis Torres, Ian Skillman, Kiet Le, Evan LeBel, Jesus Hernandez, Jaime Sanchez, Rodrigo Romero

    35 parts2
  • 4 layers243.8 × 204.5 mmA1 micro atx, the printed circuit board in 3D

    A1 micro atx

    andrastantos/anachron

    243 parts1MIT
  • 2 layers125 × 120 mmPower, the printed circuit board in 3D

    Power

    mbouyer/weatherstation

    A home weather station with internet connectivity

    74 partsBSD-2-Clause
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the MC33063AP?

Yes. The symbol is Regulator_Switching:MC33063AP and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MC33063AP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MC33063AP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the MC33063AP?

JLCPCB lists it as part C2865301, with 3,000 in stock; the sellers' links on this page open their listings.

What can replace the MC33063AP?

Parts like it in the library: the LT1372CN8#PBF by Analog Devices, the LT1372HVCN8#PBF by Analog Devices, the LT1373CN8#PBF by Analog Devices and the LT1373HVCN8#PBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MC33063AP?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.