
Cpc6128 rom board
bmpc/amstrad_cpc6128_romboard
A ROM Board for the Amstrad CPC 6128 capable of loading two expansion ROMs simultaneously from an SD card.

A bench tester for the Bally/Midway MCR Sound I/O family: the 90908 Sound I/O and the 90913 / 91483 / 91657 Super Sound I/O (Z80, two AY-3-8910s, and all of the game's input ports).
Ssio check is an open-source printed circuit board by paulbruneau, from the paulbruneau/ssio-check repository on GitHub. It is a 2-layer board of 170 × 105 mm with 72 parts on 87 nets, routed with 2,185 tracks and 290 vias.
It is built around the SN74HC541N, CD74HC4017E and DS1813-15+, with the SN74HC00N, SN74HC02N and SN74HC14N among its other parts. Its parts include 15 capacitors, 14 resistors, 11 diodes, 9 ICs and 6 switches.
A bench tester for the Bally/Midway MCR Sound I/O family: the 90908 Sound I/O and the 90913 / 91483 / 91657 Super Sound I/O (Z80, two AY-3-8910s, and all of the game's input ports). Plug the sound board's two bus ribbons into SSIO Check, wire its audio connector, power it, and it plays sounds, reads its inputs and shows the sound CPU's status byte, with no CPU board, video board, harness or cabinet.
By Ethical Paul. Companion to Squeak Check! and Race Check!.

| Board | Games |
|---|---|
| 90908 Sound I/O | Kick / Kickman, Solar Fox, Draw Poker |
| 90913 Super Sound I/O | Satan's Hollow, Tron, Domino Man, Wacko, Two Tigers, Journey, Tapper, Timber, Demolition Derby, Spy Hunter (some) |
| 91483 Super Sound I/O | Kozmik Kroozr |
| 91657 Super Sound I/O with panning | Discs of Tron, NFL Football, Spy Hunter (some), Crater Raider, Turbo Tag (proto) |
Board numbers per the MAME MCR drivers (mcr.cpp, mcr3.cpp). The Satan's Hollow (90913-A941), Tron (90913-E000) and Domino Man (90913-F000) schematics all print the same bus ribbon and test-connector tables. The 90908 and 91657 differ on J6 only (an on-board DIP switch instead of J6 inputs), which SSIO Check doesn't use.
SSIO Check stands in for the MCR CPU board on the sound board's two 24-pin bus ribbons (sound J1 = CPU J3, sound J2 = CPU J4, pin 1 to pin 1). The sound board has its own 16 MHz clock and interrupt timer, so all the tester supplies is power, /RESET and Z80 I/O cycles:
| What | Ribbon pins | How |
|---|---|---|
| +5 V / +12 V / GND | J1-4..6, J2-19..21 / J2-11, 12 / J1-1..3, J2-1, 2, 22..24 | KK-396 power input, same cable as Squeak Check |
| /RESET | J1-20 | DS1813: 150 ms at power-up, RESET button (open drain, so the sound board's own reset switch still works) |
| Address A0-A7 | J2-10..3 | PORT dial through a 74HC541: A0-A2 = bits 1/2/4, A3 = A4 = bit 8, A5-A7 = 0 |
| Data D0-D7 | J1-10..17 | HI/LO dials through a 74HC541 (write), 74HC574 + 8 LEDs (read), 10k pull-ups |
| /IORQ, /WR, /RD | J2-14, 17, 16 | one ~19 us cycle per press from a 74HC14 oscillator + 74HC4017 sequencer |
| /WAIT | J2-13 | pulled up; low holds the sequencer, stretching the strobe as on a Z80 |
The PORT dial follows the real I/O map: C-F are ports 1C-1F, the four sound command latches (PLAY writes the HI/LO byte there); 0-4 are the input ports and 7 is the sound CPU's status byte (READ shows it on the BUS LEDs). PLAY on 0-7 writes the output ports. The BUS LEDs show the data bus at the end of every cycle, so after a PLAY they confirm the byte reached the bus (a stuck or shorted data line shows up here).
Audio comes back from the sound board's J3 over a 7-wire harness: left and right line level to a 3.5 mm stereo jack (the Squeak Check Rev F jack), and the board's external volume pot (J3-1..3, which the sound board expects; its own VR1 is "optional") to a 1k pot on the tester. The power header has the same pin order as Squeak Check (+5V, GND, GND, +12V from the left).
| Path | What it is |
|---|---|
hw/out/SSIOCheck_RevA_Gerbers.zip | Gerbers and drills, Rev A (170 x 105 mm, 2 layers, 1.6 mm; 1206 passives and LEDs as on Squeak Check Rev F) |
hw/out/Schematic_RevA.pdf | Schematic, drawn from the same netlist as the board |
hw/out/BOM.csv, hw/out/Mouser_BOM.csv | Bill of materials; the Mouser one uploads straight to Mouser's BOM tool (every part checked on mouser.com 23 Oct 2026, about $50 per board) |
hw/out/J1_J2_Pin_Map.csv, hw/out/Harness_Pin_Map.csv | Every ribbon pin, and the J3 harness wiring |
hw/out/KiCad/ | KiCad 8 PCB: copper, drills, outline, nets (silkscreen is in the Gerbers) |
hw/out/README.txt | Build notes, the checks to make before ordering, verification |
hw/*.py | The generator (from Race Check): circuit.py (parts and nets), layout.py, router.py, pour.py, silk.py, export.py, make_docs.py |
hw/tools/ | Checks: gate-level logic simulation, Gerber DRC (from Squeak Check), exact clearance, pad spacing, silk/drill check, renders |
Rebuild: cd hw && python3 build_route.py && python3 export.py && python3 make_docs.py, then python3 tools/drc.py out/Gerbers out/KiCad/SSIOCheck.kicad_pcb 25 and python3 tools/logic_sim.py.
Check your bus ribbons and J3 plug against hw/out/README.txt, and note that Mouser had only 57 of the Grayhill hex dials (three per board) and 15 of the Samtec 1x24 headers (a stocked Molex alternate is listed).
© 2026 Ethical Paul. All rights reserved. No license is granted yet; ask before reusing the files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 26-60-4040 | SSIOCheck:PWR1 | PWR1 |
| 1 | 4605X-101-103LF | SSIOCheck:RN2 | RN2 |
| 1 | 4609X-101-102LF | SSIOCheck:RN4 | RN4 |
| 1 | 4609X-101-103LF | SSIOCheck:RN1 | RN1 |
| 1 | 4609X-101-103LF | SSIOCheck:RN3 | RN3 |
| 1 | 94HBB16T | SSIOCheck:SW3 | SW3 |
| 1 | 94HBB16T | SSIOCheck:SW1 | SW1 |
| 1 | 94HBB16T | SSIOCheck:SW2 | SW2 |
| 1 | APT3216EC | SSIOCheck:D1 | D1 |
| 1 | APT3216SGC | SSIOCheck:D13 | D13 |
| 1 | APT3216SGC | SSIOCheck:D14 | D14 |
| 1 | APT3216SGC | SSIOCheck:D3 | D3 |
| 1 | APT3216SGC | SSIOCheck:D16 | D16 |
| 1 | APT3216SGC | SSIOCheck:D17 | D17 |
| 1 | APT3216SGC | SSIOCheck:D11 | D11 |
| 1 | APT3216SGC | SSIOCheck:D12 | D12 |
| 1 | APT3216SGC | SSIOCheck:D18 | D18 |
| 1 | APT3216SGC | SSIOCheck:D15 | D15 |
| 1 | APT3216YC | SSIOCheck:D2 | D2 |
| 1 | B3F-1050 | SSIOCheck:SW6 | SW6 |
| 1 | B3F-1050 | SSIOCheck:SW5 | SW5 |
| 1 | B3F-1050 | SSIOCheck:SW4 | SW4 |
| 1 | C1206C471J5GACTU | SSIOCheck:C1 | C1 |
| 1 | CD74HC4017E | SSIOCheck:U4 | U4 |
| 1 | CL31A106KAHNNNE | SSIOCheck:C8 | C8 |
| 1 | CL31A106KAHNNNE | SSIOCheck:C9 | C9 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C16 | C16 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C14 | C14 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C10 | C10 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C12 | C12 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C15 | C15 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C11 | C11 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C13 | C13 |
| 1 | CL31B104KBCNNNC | SSIOCheck:C17 | C17 |
| 1 | CL31B105KBHNNNE | SSIOCheck:C2 | C2 |
| 1 | CL31B105KBHNNNE | SSIOCheck:C3 | C3 |
| 1 | DS1813-15+ | SSIOCheck:U9 | U9 |
| 1 | ESK107M025AC3AA | SSIOCheck:C4 | C4 |
| 1 | ESK107M025AC3AA | SSIOCheck:C5 | C5 |
| 1 | J3 harness | SSIOCheck:J3 | J3 |
| 1 | M3 | SSIOCheck:H2 | H2 |
| 1 | M3 | SSIOCheck:H3 | H3 |
| 1 | M3 | SSIOCheck:H1 | H1 |
| 1 | M3 | SSIOCheck:H4 | H4 |
| 1 | MF-R050 | SSIOCheck:F2 | F2 |
| 1 | MF-R250 | SSIOCheck:F1 | F1 |
| 1 | PTV09A-4020U-B102 | SSIOCheck:RV1 | RV1 |
| 1 | RC1206FR-07100KL | SSIOCheck:R13 | R13 |
| 1 | RC1206FR-07100KL | SSIOCheck:R14 | R14 |
| 1 | RC1206FR-0710KL | SSIOCheck:R3 | R3 |
| 1 | RC1206FR-0710KL | SSIOCheck:R1 | R1 |
| 1 | RC1206FR-0710KL | SSIOCheck:R2 | R2 |
| 1 | RC1206FR-071KL | SSIOCheck:R11 | R11 |
| 1 | RC1206FR-071KL | SSIOCheck:R8 | R8 |
| 1 | RC1206FR-071KL | SSIOCheck:R12 | R12 |
| 1 | RC1206FR-071KL | SSIOCheck:R10 | R10 |
| 1 | RC1206FR-073K3L | SSIOCheck:R9 | R9 |
| 1 | RC1206FR-0747RL | SSIOCheck:R6 | R6 |
| 1 | RC1206FR-0747RL | SSIOCheck:R5 | R5 |
| 1 | RC1206FR-0747RL | SSIOCheck:R7 | R7 |
| 1 | RC1206FR-074K7L | SSIOCheck:R4 | R4 |
| 1 | SJ1-3523N | SSIOCheck:J8 | J8 |
| 1 | SN74HC00N | SSIOCheck:U5 | U5 |
| 1 | SN74HC02N | SSIOCheck:U2 | U2 |
| 1 | SN74HC14N | SSIOCheck:U1 | U1 |
| 1 | SN74HC541N | SSIOCheck:U6 | U6 |
| 1 | SN74HC541N | SSIOCheck:U7 | U7 |
| 1 | SN74HC574N | SSIOCheck:U8 | U8 |
| 1 | SN74HC74N | SSIOCheck:U3 | U3 |
| 1 | TSW-107-07-T-S | SSIOCheck:J9 | J9 |
| 1 | TSW-124-07-T-S | SSIOCheck:J2 | J2 |
| 1 | TSW-124-07-T-S | SSIOCheck:J1 | J1 |

bmpc/amstrad_cpc6128_romboard
A ROM Board for the Amstrad CPC 6128 capable of loading two expansion ROMs simultaneously from an SD card.




drewsipher/sharkcnc
Open CNC control stack for a Sherline 2000: FluidNC ESP32-S3 breakout hardware + host software plan

jgw4/a1cards
The Apple Cassette Interface "ACI" card has been completely reverse-engineered in KiCad 10, with linked KiCad and schematic files, which output production-ready gerber files and a fully-populated step file of the card…


usr-ein/TriMixxx
Open source standalone DJ multimedia player, compatible with Rekordbox
It measures 170 × 105 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the SN74HC541N, CD74HC4017E, DS1813-15+ and SN74HC00N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the paulbruneau/ssio-check repository on GitHub, at the commit this page was made from: the board is hw/out/KiCad/SSIOCheck.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask paulbruneau before reusing the design.