
Controller module
InputBlackBoxOutput/INGAME
Virtual reality controller for playing FPS games

Virtual reality controller for playing FPS games
HID module is an open-source printed circuit board by InputBlackBoxOutput, from the InputBlackBoxOutput/INGAME repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 30 mm with 45 parts on 41 nets, routed with 556 tracks and 38 vias.
It is built around the ATMEGA32U4-AU, ESP32-WROOM-32D and AMS1117-3.3. Its parts include 14 resistors, 7 capacitors, 5 switches, 4 diodes and 4 connectors. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
INGAME is a motion emulator with virtual reality features for playing first person shooting/adventure games. Virtual reality (VR) is a simulated experience that can be similar to or completely different from the real world. INGAME has been designed to provide the user with the feeling of being 'IN-the-GAME'. INGAME is modular in nature and consists of the following modules.
The first three modules listed above have been explained in detail later in the document. The VR headset provides split stereo video to the user. The following image shows the functional block diagram of the INGAME system

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R6, R7, R8, R11 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R12 |
| 3 | Conn_01x06_Female | Board:SolderWire_1x06_P2.54mm | J2, J3, J4 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW4, SW5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW2, SW3 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | SSD1306 | Board:128x64OLED | DS1 |
| 1 | USB_C_Receptacle_USB2.0 | Board:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

InputBlackBoxOutput/INGAME
Virtual reality controller for playing FPS games

InputBlackBoxOutput/INGAME
Virtual reality controller for playing FPS games







TDA-2030/E-ink-screen
An assistant to help you view text and picture calendars


MarkJB/ESP32_Plotter_Controller
An ESP32/TMC2130 based 2 axis controller designed for pen plotters

sqfmi/HPDL-1414-20x2-ESP32
20x2 Character Display with HPDL-1414 modules & ESP32

It measures 50 × 30 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the ATMEGA32U4-AU, ESP32-WROOM-32D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the InputBlackBoxOutput/INGAME repository on GitHub, at the commit this page was made from: the board is modules/HID module/board/board.kicad_pcb and its schematic modules/Controller module/board/BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).