

Ethernet switch 4out
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 242
- Nets
- 188
- Pads
- 782
- Tracks, vias
- 1,753, 886
- Pours
- 815
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jun 2023
- Updated
- 2 Nov 2025
Overview
Ethernet switch 4out is an open-source printed circuit board by immortal-sniper1, from the immortal-sniper1/Ethernet_switch repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 100 mm with 242 parts on 188 nets, routed with 1,753 tracks and 886 vias.
It is built around the ESP32-S3-WROOM-1-N8, RTL8305NB-VB-CG and AD5337BRM, with the RT7272BGSP, CAT24C256LI and CJ431 among its other parts. Its parts include 83 resistors, 74 capacitors, 36 diodes, 15 connectors and 13 ICs. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
Main components
9ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesRTL8305NB-VB-CG
QFN-48-EP(6x6)0℃~+70℃ 1.2V、3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s 5 QFN-48-EP(6x6) Ethernet Transceivers ROHSRealtek SemiconEthernet TransceiversAD5337BRM
MSOP-8-40℃~+105℃ 0.25LSB 2 2.5V~5.5V 6us 8 I2C Integrated buffer、Power-on reset、Power-down mode MSOP-8 Digital to Analog Converters (DAC)Analog DevicesDigital To Analog Converters (DAC)RT7272BGSP
SOIC-8-EP-40℃~+125℃ 1 3A 4.5V~36V 500kHz 800mV~30V 900uA Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHSRICHTEKDC-DC ConvertersCAT24C256LI
PDIP-81,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHSonsemiEEPROMCJ431
SOT-89-3-25℃~+85℃@(Ta) 100mA 1mA 2.5V~36V 50ppm/℃ Adjustable Parallel ±0.5% SOT-23 Voltage Reference ROHSJiangsu Changjing Electronics Technology (CJ)Voltage ReferenceSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)W5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet ControllersSMF6.0CA
SOD-123FL-55℃~+150℃ 10.3V 19.4A 200W 400uA 6.67V 6V Bidirectional IEC 61000-4-2 TVS SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLiownESD And Surge Protection (TVS/ESD)
README
README.mdEthernet_switch
Parts
242| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C10, C11, C12, C13, C16, C17, C18, C19, C20, C21, C22, C25, C29 +19 |
| 24 | SMF6.0CA | Diode_SMD:D_SOD-123F | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +8 |
| 21 | 10 | Resistor_SMD:R_0402_1005Metric | R5, R6, R32, R44, R45, R46, R47, R49, R50, R51, R52, R54, R55, R56, R57, R59 +5 |
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R27, R34, R35, R38, R39, R53, R58, R66, R67, R70, R71, R74, R75, R78, R79 |
| 15 | 10u | Capacitor_SMD:C_0603_1608Metric | C14, C15, C28, C35, C36, C53, C54, C60, C61, C62, C65, C67, C68, C70, C74 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C27, C31, C34, C38, C39, C41, C42, C44, C45, C47, C48 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R28, R29, R30, R31, R40, R41 |
| 6 | green | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5, D6, D7 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R13, R14, R15 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R16, R22, R25, R26, R42 |
| 5 | D_Schottky | Diode_SMD:D_SMA | D1, D33, D34, D36, D37 |
| 4 | 0R1 | Resistor_SMD:R_1206_3216Metric | R19, R21, R72, R73 |
| 4 | 1n | Capacitor_SMD:C_1206_3216Metric | C40, C43, C46, C49 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R1, R2, R9, R10 |
| 4 | RJ45 Abracon ARJM11B1 | Z_mycustom_footprint_lib:RJ45_Abracon_ARJM11B1 | J7, J8, J9, J10 |
| 4 | hole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 470 | Resistor_SMD:R_0402_1005Metric | R12, R20, R68 |
| 3 | 47k | Resistor_SMD:R_0402_1005Metric | R33, R63, R65 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J5, J6 |
| 3 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J3, J15 |
| 3 | MCU_RESET | SamacSys_Parts:PTS526SK15SMTR2LFS | SW1, SW2, SW3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4 |
| 2 | 120k | Resistor_SMD:R_0603_1608Metric | R76, R77 |
| 2 | 16k | Resistor_SMD:R_0402_1005Metric | R82, R83 |
| 2 | 1n5 | Capacitor_SMD:C_0603_1608Metric | C71, C72 |
| 2 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R11, R69 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R43, R48 |
| 2 | 3k9 | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 4n7 | Capacitor_SMD:C_0402_1005Metric | C55, C63 |
| 2 | 5R1 | Resistor_SMD:R_0402_1005Metric | R23, R64 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R36, R37 |
| 2 | 6n8 | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | C_Polarized_Small | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C64, C69 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U6, U12 |
| 1 | 10-20uH | Inductor_SMD:L_Taiyo-Yuden_NR-50xx_HandSoldering | L2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R80 |
| 1 | 330k | Resistor_SMD:R_0402_1005Metric | R81 |
| 1 | 33u | Z_mycustom_footprint_lib:SWPA6045S330MT | L1 |
| 1 | AD5337 | Package_SO:MSOP-8_3x3mm_P0.65mm | U11 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | CJ431 | Package_TO_SOT_SMD:SOT-23 | U9 |
| 1 | Conn_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J12 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Conn_01x02 | Z_mycustom_footprint_lib:MYOUNG MY-18650-01 | J13 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | FerriteBead_Small | Resistor_SMD:R_0805_2012Metric | FB1 |
| 1 | Fiducial | Symbol:KiCad-Logo2_5mm_SilkScreen | FID2 |
| 1 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1 |
| 1 | Fiducial | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | FID3 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J14 |
| 1 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | Polarity | Symbol:Polarity_Center_Positive_6mm_SilkScreen | FID4 |
| 1 | RT7272B | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U13 |
| 1 | RTL8305NB-VB-CG | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U3 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | TX4410 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U7 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J4 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | red | LED_SMD:LED_0603_1608Metric | D8 |
Similar boards
- 4 layers117 × 107 mm

- 4 layers106 × 63.5 mm

- 4 layers144 × 127 mm

Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 4 layers86.6 × 85.1 mm

- 2 layers90 × 56 mm

SensactHsNano3
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
130 parts4Apache-2.0 - 2 layers337.2 × 122.6 mm

- 4 layers52.8 × 47 mm

- 4 layers

Questions
How big is the Ethernet switch 4out PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Ethernet switch 4out use?
242 parts, built around the ESP32-S3-WROOM-1-N8, RTL8305NB-VB-CG, AD5337BRM and RT7272BGSP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet switch 4out KiCad files?
From the immortal-sniper1/Ethernet_switch repository on GitHub, at the commit this page was made from: the board is Ethernet_switch_4out/Ethernet_switch_4out.kicad_pcb and its schematic Ethernet_switch_4out/Cell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet switch 4out design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).