Skip to the content
1234567899999

RT7272BGSP

RICHTEKExtended

-40℃~+125℃ 1 3A 4.5V~36V 500kHz 800mV~30V 900uA Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHS

Part id
richtek-tech/RT7272BGSP
Category
DC DC Converters
Package
SOIC-8-EP
Pins
9
In stock
47,533 at JLCPCB (C127866)
Used on
4 open-source boards

Overview

The RT7272BGSP is a DC DC Converter made by RICHTEK in a SOIC-8-EP package with 9 pins. -40℃~+125℃ 1 3A 4.5V~36V 500kHz 800mV~30V 900uA Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Pro:RT7272BGSP, from EasyEDA Pro) and its footprint (EasyEDA_Pro:soic-8_l5.0-w4.0-p1.27-ls6.0-bl-ep2.0, from EasyEDA Pro), ready for a KiCad board. 47,533 are in stock at JLCPCB (part C127866). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1SW2BOOT3EN4GND5FB6COMP7RLIM8VIN9EPAD
EasyEDA_Pro:RT7272BGSPFrom EasyEDA Pro

Footprint

1234567899999
EasyEDA_Pro:soic-8_l5.0-w4.0-p1.27-ls6.0-bl-ep2.0From EasyEDA Pro

From the datasheet

18
Supply, least
4.5 V · VIN, recommended operating minimum · p. 4
Supply, most
36 V · VIN, recommended operating maximum · p. 4
Supply, absolute maximum
40 V · VIN, absolute maximum · p. 4
Works from
-40 °C · Ambient temperature, operating minimum · p. 4
Works up to
85 °C · Ambient temperature, operating maximum · p. 4
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 4
Takes working
900 µA · VIN quiescent current, typical, VEN = 3V, VFB = 0.9V · p. 4
Takes asleep
500 nA · VIN shutdown current, typical, VEN = 0V · p. 4
Gives
3 A · Rated output current maximum · p. 1
Current limit
2.5 A · Upper switch current limit, typical, minimum duty cycle, RLIM = 57.6kΩ · p. 4
Current limit
3.5 A · Upper switch current limit, typical, minimum duty cycle, RLIM = 84.5kΩ · p. 4
Current limit
5.5 A · Upper switch current limit, typical, minimum duty cycle, RLIM = 137kΩ · p. 4
Feedback reference
800 mV · Feedback reference voltage, typical, VIN = 4.5V to 36V · p. 4
Switches at
500 kHz · Oscillation frequency, typical · p. 5
Junction to air (SOP-8 (Exposed Pad))
49 K/W · Junction to ambient, four-layer JEDEC 51-7 board · p. 4
Junction to case (SOP-8 (Exposed Pad))
15 K/W · Junction to case, exposed pad · p. 4
Junction, hottest
125 °C · operating junction temperature max · p. 12
Junction to air (SOP-8 (Exposed Pad))
75 K/W · standard JEDEC 51-7 four-layer thermal test board · p. 12

What it is and has

16
Output current
3A · p. 1
Integrated switches
Internal N-MOSFETs · p. 1
Control
Current mode · p. 1
Switching frequency
500kHz fixed · p. 1
Output voltage
Adjustable from 0.8V to 30V · p. 1
Efficiency
Up to 95% · p. 1
Output capacitor compatibility
Stable with low ESR ceramic output capacitors · p. 1
Protection
Cycle-by-cycle current limit · p. 1
Protection
Input under-voltage lockout · p. 1
Protection
Output under-voltage protection · p. 1
Protection
Thermal shutdown · p. 1
Current limit
Adjustable · p. 1
Environmental compliance
RoHS compliant and halogen free · p. 1
Package
SOP-8 (Exposed Pad-Option 2) · p. 1
Internal MOSFETs
N-channel · p. 1
Adjustable output voltage
0.8V to 30V · p. 1

Around it

28
cap 0.1µF
between BOOT and SW; Low ESR ceramic bootstrap capacitor. · p. 10
cap 10µF x 2
between VIN and GND; Two low ESR ceramic input capacitors. · p. 11
res 100kΩ
between VIN and EN; REN pull-up for digital enable control using external MOSFET Q1. · p. 10
diode IN4148 or BAT54
between external 5V and BOOT; External bootstrap diode recommended when VIN is below 5.5V or duty ratio exceeds 65%; external boot voltage must remain below 5.5V. · p. 10
cap 22µF x 2
between VOUT and GND; COUT; suggested for all six output voltage examples in Table 1. · p. 6
cap 2.7nF
between COMP and RC; CC in the series compensation network to GND; suggested for all six output voltage examples. · p. 6
res 47kΩ
between VOUT and FB; R1 for VOUT = 12V. · p. 6
res 3.35kΩ
between FB and GND; R2 for VOUT = 12V. · p. 6
ind 10µH
between SW and VOUT; Suggested for VOUT = 12V. · p. 6
res 27kΩ
between VOUT and FB; R1 for VOUT = 8V. · p. 6
res 3kΩ
between FB and GND; R2 for VOUT = 8V. · p. 6
res 36kΩ
between CC and GND; RC in the series compensation network for VOUT = 8V. · p. 6
ind 8.2µH
between SW and VOUT; Suggested for VOUT = 8V. · p. 6
res 62kΩ
between VOUT and FB; R1 for VOUT = 5V. · p. 6
res 11.8kΩ
between FB and GND; R2 for VOUT = 5V. · p. 6
res 24kΩ
between CC and GND; RC in the series compensation network for VOUT = 5V. · p. 6
ind 6.8µH
between SW and VOUT; Suggested for VOUT = 5V. · p. 6
res 75kΩ
between VOUT and FB; R1 for VOUT = 3.3V. · p. 6
res 24kΩ
between FB and GND; R2 for VOUT = 3.3V. · p. 6
res 16kΩ
between CC and GND; RC in the series compensation network for VOUT = 3.3V. · p. 6
ind 4.7µH
between SW and VOUT; Suggested for VOUT = 3.3V. · p. 6
res 25.5kΩ
between VOUT and FB; R1 for VOUT = 2.5V. · p. 6
res 12kΩ
between FB and GND; R2 for VOUT = 2.5V. · p. 6
ind 3.6µH
between SW and VOUT; Suggested for VOUT = 2.5V. · p. 6
res 30kΩ
between VOUT and FB; R1 for VOUT = 1.2V. · p. 6
res 60kΩ
between FB and GND; R2 for VOUT = 1.2V. · p. 6
res 6.8kΩ
between CC and GND; RC in the series compensation network for VOUT = 1.2V. · p. 6
ind 2.2µH
between SW and VOUT; Suggested for VOUT = 1.2V. · p. 6

Specifications

39
ParameterConditionsAs printedPage
Supply Input Voltage, VIN VINmin -0.3 · max 40 V4
Switch Voltage, SW SWMaximum = VIN + 0.3Vmin -0.3 V4
VBOOT − VSW VBOOT − VSWmin -0.3 · max 6 V4
Other Pins Voltagemin -0.3 · max 40 V4
Power Dissipation PDSOP-8 (Exposed Pad), TA = 25°Cmax 2.041 W4
Package Thermal Resistance θJASOP-8 (Exposed Pad); TA = 25°C, high effective thermal conductivity four-layer test board per JEDEC 51-7typ 49 °C/W4
Package Thermal Resistance θJCSOP-8 (Exposed Pad); measured at exposed padtyp 15 °C/W4
Lead Temperature (Soldering, 10 sec.)Soldering, 10 sec.max 260 °C4
Junction Temperaturemax 150 °C4
Storage Temperature Rangemin -65 · max 150 °C4
HBM (Human Body Model)ESD Susceptibilitymax 2 kV4
Supply Input Voltage, VIN VINmin 4.5 · max 36 V4
Junction Temperature Rangemin -40 · max 125 °C4
Ambient Temperature Rangemin -40 · max 85 °C4
Shutdown Supply CurrentVIN = 12V, CIN = 20uF, TA = 25°C; VEN = 0Vtyp 0.5 · max 3 uA4
Quiescent Current IQVIN = 12V, CIN = 20uF, TA = 25°C; VEN = 3V, VFB = 0.9Vtyp 0.9 · max 1.2 mA4
Feedback Reference Voltage VREFCIN = 20uF, TA = 25°C; 4.5V ≤ VIN ≤ 36Vmin 0.788 · typ 0.8 · max 0.812 V4
High Side Switch On-Resistance RDS(ON)1VIN = 12V, CIN = 20uF, TA = 25°Ctyp 150 mΩ4
Low Side Switch On-Resistance RDS(ON)2VIN = 12V, CIN = 20uF, TA = 25°Ctyp 80 mΩ4
High Side Switch Leakage CurrentVIN = 12V, CIN = 20uF, TA = 25°C; VEN = 0V, VSW = 0Vtyp 0 · max 10 uA4
Upper Switch Current Limit Range UOCVIN = 12V, CIN = 20uF, TA = 25°Cmin 1.9 · max 7 A4
Upper Switch Current Limit UOCVIN = 12V, CIN = 20uF, TA = 25°C; Min. Duty Cycle, RLIM = 57.6kΩ; Note 5min 1.9 · typ 2.5 · max 3.1 A4
Upper Switch Current Limit UOCVIN = 12V, CIN = 20uF, TA = 25°C; Min. Duty Cycle, RLIM = 84.5kΩ; Note 5min 2.7 · typ 3.5 · max 4.2 A4
Upper Switch Current Limit UOCVIN = 12V, CIN = 20uF, TA = 25°C; Min. Duty Cycle, RLIM = 137kΩ; Note 5min 4.5 · typ 5.5 · max 6.5 A4
Lower Switch Current LimitVIN = 12V, CIN = 20uF, TA = 25°C; From Drain to Sourcetyp 1.5 A4
Oscillation Frequency fOSC1VIN = 12V, CIN = 20uF, TA = 25°Cmin 450 · typ 500 · max 550 kHz5
Short Circuit Oscillation Frequency fOSC2VIN = 12V, CIN = 20uF, TA = 25°C; VFB = 0Vtyp 75 kHz5
Maximum Duty Cycle DMAXVIN = 12V, CIN = 20uF, TA = 25°C; VFB = 0.7Vtyp 90 %5
Minimum On-Time tONVIN = 12V, CIN = 20uF, TA = 25°Ctyp 100 ns5
EN Input Voltage VIHVIN = 12V, CIN = 20uF, TA = 25°C; Logic-Highmin 2 V5
EN Input Voltage VILVIN = 12V, CIN = 20uF, TA = 25°C; Logic-Lowmax 0.4 V5
Input Under Voltage Lockout Threshold VUVLOCIN = 20uF, TA = 25°C; VIN Risingmin 3.9 · typ 4.1 · max 4.3 V5
Input Under Voltage Lockout Hysteresis ∆VUVLOVIN = 12V, CIN = 20uF, TA = 25°Ctyp 250 mV5
Thermal Shutdown TSDVIN = 12V, CIN = 20uF, TA = 25°Ctyp 150 °C5
Thermal Shutdown Hysteresis ∆TSDVIN = 12V, CIN = 20uF, TA = 25°Ctyp 20 °C5
COMP to Current Sense Transconductance GCSVIN = 12V, CIN = 20uF, TA = 25°C; ∆ICOMP = ±10uAtyp 4.7 A/V5
Error Amplifier Transconductance GEAVIN = 12V, CIN = 20uF, TA = 25°Ctyp 1000 uA/V5
Load Regulation ∆VLOADVIN = 12V, CIN = 20uF, TA = 25°Cmax 0.05 %/A5
Line Regulation ∆VLINECIN = 20uF, TA = 25°C; VIN = 4.5V to 36Vmax 0.1 %5

Pins, by the datasheet

9
1 SW
Switch node; connect to external L-C filter. · p. 2
2 BOOT
Bootstrap supply for high side gate drive; connect a 100nF or greater capacitor from BOOT to SW. · p. 2
3 EN
Logic-high enables the converter; logic-low forces shutdown. · p. 2
4 GND
Ground. · p. 2
5 FB
Feedback input; connect to the output through a resistive divider to set the regulated output voltage. · p. 2
6 COMP
Compensation node; connect a series RC network to GND, with an additional capacitor to GND in some cases. · p. 2
7 RLIM
Connect a resistor to determine the current limit. · p. 2
8 VIN
Power input, 4.5V to 36V; bypass with a suitable large ceramic capacitor. · p. 2
9 GND
Exposed pad; solder to a large PCB and connect to GND for maximum thermal dissipation. · p. 2

Ordering codes, by the datasheet

1
RT7272BGSP
SOP-8 (Exposed Pad-Option 2) · G: Green (Halogen Free and Pb Free); SP: exposed-pad package option 2. · p. 2

Open-source boards using it

4
  • 4 layers106 × 63.5 mmBrineomatic, the printed circuit board in 3D

    Brineomatic

    hoeken/brineomatic

    Open Source Watermaker Controller.

    323 parts47LGPL-2.1
  • 4 layers144 × 127 mmFrothfet, the printed circuit board in 3D

    Frothfet

    hoeken/frothfet

    Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

    394 parts14GPL-3.0
  • 4 layers86.6 × 85.1 mmDPB PCB, the printed circuit board in 3D

    DPB PCB

    V2-Tech/DPB-PCB

    118 parts1GPL-3.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the RT7272BGSP?

Yes. The symbol is EasyEDA_Pro:RT7272BGSP and the footprint EasyEDA_Pro:soic-8_l5.0-w4.0-p1.27-ls6.0-bl-ep2.0, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RT7272BGSP?

SOIC-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the RT7272BGSP datasheet?

RICHTEK publishes it: the Datasheet link on this page opens it.

Where can I order the RT7272BGSP?

JLCPCB lists it as part C127866, with 47,533 in stock; the sellers' links on this page open their listings.

What can replace the RT7272BGSP?

Parts like it in the library: the TPS54560DDAR by Texas Instruments, the SY8205FCC by 矽力杰silergy, the XL4201E1 by XLSEMI and the SY8204FCC by 矽力杰silergy. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RT7272BGSP?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.