Skip to the content
2 layers80 × 100 mmMulticartridge smd-32u4-front dipswitch, the printed circuit board in 3D

Multicartridge smd-32u4-front dipswitch

ifilot/p2000t-cartridges

Collection of homebrew P2000T cartridges

Size
80 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
72
Nets
107
Pads
404
Tracks, vias
1,975, 253
Pours
922
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Aug 2023
Updated
24 Oct 2026

Overview

Multicartridge smd-32u4-front dipswitch is an open-source printed circuit board by ifilot, from the ifilot/p2000t-cartridges repository on GitHub. It is a 2-layer board of 80 × 100 mm with 72 parts on 107 nets, routed with 1,975 tracks and 253 vias.

It is built around the ATMEGA32U4-AU, 74HC573 and 74HC157D, with the 74HC00D, 74HC123D and 74HC32D among its other parts. Its parts include 27 capacitors, 23 resistors, 12 ICs, 3 connectors and 2 switches. It belongs with the retro computing and games boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

9

README

README.md

P2000T Cartridges

discord

Purpose

Set of homebrew multirom cartridges for the P2000T. These cartridges contain multiple ROM files stored on a single parallel EEPROM chip. The user can select the desired program using a DIP switch. More information on these cartridges can be found on the website.

[!TIP] Have questions or comments about the P2000T Cartridges? Join the conversation and chat with the developers on our Discord server.

MultiROM cartridges

[!TIP]

  • Unsure which cartridge is right for you? The 32x16KiB THT SST39SF040 (512 KiB ROM) offers the most features and is relatively straightforward to assemble with soldering.
  • When ordering the cartridges, it is advisable to choose an ENIG finish, opt for gold fingers, and specify a 30-degree chamfer on the edge connector.
  • For flashing the SST39SF0x0 chips, there is a cheap Flasher tool available, based on the Raspberry Pi PICO.
  • A premade set of cartridge ROM-packs can be found here.

32x16KiB THT SST39SF040 (512 KiB ROM)

A SLOT1 cartridge designed to enable selection from 32 memory banks, assuming the use of a 512KB ROM chip. It features a dedicated bracket PCB for holding the DIP switch, which can be connected to the main PCB using either six wires or a custom flex cable. Additionally, this cartridge includes a soft reset switch, equipped with a debouncing circuit using a 74HC123 multivibrator. This cartridge uses THT components.

P2000T 32x16KiB THT SST39SF040 Cartridge

32x16KiB SMD SST39SF040 (512 KiB ROM)

Similar to the 32x16KiB THT SST39SF040 cartridge, this version utilizes SMD components, with the exception of the PLCC32 THT socket used for the SST39SF040 chip. Design schematics for the DIP switch plate and the flexcable can be found under the THT variant. Position and BOM files are provided for assembly service.

P2000T 32x16KiB SMD SST39SF040 Cartridge

4 x 16KiB THT W27C512 (64 KiB ROM)

There is also a MultiROM cartridge featuring the reliable W27C512 chip, offering 4x16KB of storage. Unlike the 512KB version, this cartridge omits the soft reset functionality as a cost-saving measure.

P2000T 4 x 16KiB THT W27C512 Cartridge

Multirom cartridge - ZIF

SLOT1 cartridge that allows the user to select one of 32 banks (assuming a 512kb ROM chip is used). Instead of a fixed ROM chip, this cartridge uses a ZIF socket for easy exchange of the ROM chip. The cartridge also contains a soft reset switch.

P2000T Multirom cartridge ZIF

MultiROM cartridge kit (smd)

Simplified version of the SST39SF040 / 512kb cartridge meant for easy soldering. This cartridge assumes that the SMD components are already placed using an assembly service of the PCB manufacturer.

P2000T MultiROM cartridge kit

Enclosures

All enclosures have so-called mouse ears which helps in the adhesion of the enclosure to the print plate. This prevents warping.

Recommended print settings for the enclosures:

  • 0.4mm nozzle
  • 0.20 - 0.25mm layer height
  • 10%-20% infill

Parts

72
QtyValueFootprintReferences
180.1uFCapacitor_SMD:C_0805_2012MetricC1, C5, C6, C11, C12, C13, C14, C15, C17, C19, C20, C23, C24, C25, C26, C27 +2
1310kCapacitor_SMD:C_0805_2012MetricR1, R2, R3, R4, R5, R12, R13, R14, R18, R19, R21, R22, R23
3100kCapacitor_SMD:C_0805_2012MetricR24, R25, R26
31uFCapacitor_SMD:C_0805_2012MetricC4, C10, C16
374HC573Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmU6, U7, U8
210uFCapacitor_SMD:C_0805_2012MetricC18, C21
222Resistor_SMD:R_0805_2012MetricR6, R7
25.1kResistor_SMD:R_0805_2012MetricR15, R17
274HC157Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU4, U5
1100uFCapacitor_SMD:C_1206_3216MetricC9
116MHzCrystal:Crystal_HC49-U_VerticalY1
11MResistor_SMD:R_0805_2012MetricR20
122pFCapacitor_SMD:C_0805_2012MetricC2
122pfCapacitor_SMD:C_0805_2012MetricC3
12N7002Package_TO_SOT_SMD:SOT-23Q1
133kCapacitor_SMD:C_0805_2012MetricR16
14.7nFCapacitor_SMD:C_0805_2012MetricC22
147kCapacitor_SMD:C_0805_2012MetricR11
174HC00Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
174HC123Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU9
174HC32Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU10
1ATmega32U4-APackage_QFP:TQFP-44_10x10mm_P0.8mmU3
1AVR-ISP-6Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ3
1DIPButton_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW1
1FerriteBeadResistor_SMD:R_0805_2012MetricFB1
1P2000T_cartridge_edgelibs:p2000t_cartridge_edgeJ1
1SMD0805-100Fuse:Fuse_0805_2012MetricF1
1SMF0.5ADiode_SMD:D_SOD-123FD1
1SST39SF020Package_LCC:PLCC-32_THT-SocketU2
1Soft ResetButton_Switch_THT:SW_PUSH_6mmSW2
1TPS2116DRLPackage_TO_SOT_SMD:SOT-583-8U11
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U12
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2

More from ifilot/p2000t-cartridges

9

Similar boards

  • 4 layers220 × 160 mmQds cv, the printed circuit board in 3D

    Qds cv

    cnpem-emi/qds-cv-hw

    Quench detection system for a single superconducting coil working in the Vertical Cryostat.

    403 parts
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 2 layers135.9 × 53.3 mmSpi, the printed circuit board in 3D

    Spi

    scefrom/SF68

    A board featuring the Motorola 68000

    46 parts2
  • 4 layers180.4 × 157.2 mmMx track, the printed circuit board in 3D

    Mx track

    freznel10/Zerf9

    Draft repo or Chunky v13 aka Zert9 MX_track

    300 parts20GPL-3.0
  • 2 layers99.6 × 99.7 mmRp2c02-isa, the printed circuit board in 3D

    Rp2c02-isa

    taka-tuos/rp2c02-isa

    RP2C02 ISA Card

    49 parts1MIT
  • 4 layers177 × 152.1 mmAvboard tht2, the printed circuit board in 3D

    Avboard tht2

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    139 parts150
  • 2 layers160 × 100 mmEcb prototype, the printed circuit board in 3D

    Ecb prototype

    Noah1989/loopmicro

    An 8-bit microcomputer for the 21st century

    46 parts2MIT

Questions

How big is the Multicartridge smd-32u4-front dipswitch PCB?

It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Multicartridge smd-32u4-front dipswitch use?

72 parts, built around the ATMEGA32U4-AU, 74HC573, 74HC157D and 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Multicartridge smd-32u4-front dipswitch KiCad files?

From the ifilot/p2000t-cartridges repository on GitHub, at the commit this page was made from: the board is multicartridge-smd-32u4-front-dipswitch/pcb/multicartridge-smd-32u4-front-dipswitch.kicad_pcb and its schematic multicartridge-smd-32u4-front-dipswitch/pcb/multicartridge-smd-32u4-front-dipswitch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Multicartridge smd-32u4-front dipswitch design in my own project?

Its repository states no licence, so its author keeps all rights: ask ifilot before reusing the design.