4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT
2 layers94 × 61.8 mm
Tow car
hzcodec/tow_car_pcb- Size
- 94 × 61.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 46
- Pads
- 144
- Tracks, vias
- 273, 27
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Dec 2020
- Updated
- 10 Jan 2021
Overview
Tow car is an open-source printed circuit board by hzcodec, from the hzcodec/tow_car_pcb repository on GitHub. It is a 2-layer board of 94 × 61.8 mm with 41 parts on 46 nets, routed with 273 tracks and 27 vias.
It is built around the DRV8871DDA. Its parts include 17 connectors, 5 capacitors, 4 resistors, 3 ICs and 3 diodes.
Main components
1README
README.mdtow_car_pcb
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | , , , , | ||
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J5, J6, J13 |
| 4 | Conn_01x04_Male | Connector_Molex:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J1, J10, J16, J17 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1 uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C4 |
| 3 | 68 | Diode_SMD:D_1206_3216Metric | R1, R2, R3 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3 |
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11, J14 |
| 1 | 10 uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 22 uF | Capacitor_SMD:CP_Elec_6.3x3.9 | C5 |
| 1 | 30K | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_Male | Connector_USB:USB_A_Molex_105057_Vertical | J2 |
| 1 | Conn_01x08_Male | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J9 |
| 1 | DRV8871DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U2 |
| 1 | LD1117S12TR_SOT223 | Package_TO_SOT_SMD:SOT-223 | U4 |
| 1 | LOLIN_D32 | tow_car:DIP32_W22.86 | U1 |
Similar boards
- 4 layers81.3 × 52.8 mm
- 2 layers65.6 × 56 mm
- 4 layers50 × 50 mm
Simpleboard
AlessioMorale/unav2_hardware
Initial test hardware for the future uNav board version
122 parts5MIT - 2 layers83.3 × 56.5 mm
- 4 layers123 × 56 mm
- 4 layers31.3 × 34 mm
- 2 layers93.1 × 158.3 mm
Questions
How big is the Tow car PCB?
It measures 94 × 61.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tow car use?
41 parts, built around the DRV8871DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tow car KiCad files?
From the hzcodec/tow_car_pcb repository on GitHub, at the commit this page was made from: the board is tow_car.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tow car design in my own project?
Its repository states no licence, so its author keeps all rights: ask hzcodec before reusing the design.