
Unav2
AlessioMorale/unav2_hardware
Initial test hardware for the future uNav board version

Initial test hardware for the future uNav board version
Simpleboard is an open-source printed circuit board by AlessioMorale, from the AlessioMorale/unav2_hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 50 mm with 122 parts on 76 nets, routed with 1,290 tracks and 366 vias.
It is built around the DRV8871DDA, AP2112K-3.3 and BAT54C, with the FDC6401N and STPS3045DJF-TR among its other parts. Its parts include 32 capacitors, 28 resistors, 11 diodes, 10 ICs and 9 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.
This is the first iteration of test hardware for unav2. The board includes a STM32F405 and two DRV8871 drivers. It supports motor current feedback using two INA186 and global battery current/voltage monitor using an INA219. Additionally there is an LM75 temperature monitor ic and a fan output.
Link to Interactive BOM (built with the awesome InteractiveHtmlBom plugin )
Note: Encoder, serial and fan connectors are actually JST SH series, not exactly the type shown.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2 |
| 17 | 100nF 16V | Capacitor_SMD:C_0402_1005Metric | C3, C8, C13, C14, C15, C16, C19, C21, C22, C23, C24, C26, C28, C29, C31, C32 +1 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R11, R17, R18, R19, R20, R21, R28 |
| 5 | 1uF 10V | Capacitor_SMD:C_0402_1005Metric | C4, C11, C12, C25, C27 |
| 4 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric | C2, C5, C6, C7 |
| 4 | 3.3V | Diode_SMD:D_0603_1608Metric | D7, D8, D9, D10 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R13, R22, R23, R24 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 2 | 0.003 | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 15k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R14, R25 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | DRV8871DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1, U6 |
| 2 | INA186 | Package_TO_SOT_SMD:SOT-23-6 | U7, U8 |
| 2 | KEY_UP | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 1 | 0.001 | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 19.1K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1uF 6.3V | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 22uF 25V | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 22uf 6.3V | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 4.7uf 25V | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1 |
| 1 | 8MHz | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Battery | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-4-2.5-V-THR_1x04_P2.50mm_Vertical | J6 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | D_Zener | Diode_SMD:D_0603_1608Metric | D11 |
| 1 | FAN | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8 |
| 1 | FDC6401N | Package_TO_SOT_SMD:SuperSOT-6 | Q1 |
| 1 | Fuse_Small | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | INA219AxDCN | Package_TO_SOT_SMD:SOT-23-8 | U2 |
| 1 | IP4251 | agg-kicad:HUSON8 | IC2 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | LM75B | Package_SO:TSSOP-8_3x3mm_P0.65mm | U3 |
| 1 | MPM36xx | agg-kicad:QFN-20-MPS-3x5x1.6mm | IC1 |
| 1 | Motor1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-6-2.5-V-THR_1x06_P2.50mm_Vertical | J4 |
| 1 | Motor2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-6-2.5-V-THR_1x06_P2.50mm_Vertical | J5 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | S1_VSEL | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | SERIAL1 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J2 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | STPS3045DJF | Package_TO_SOT_SMD:LFPAK56 | D6 |
| 1 | SWD2 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | SWD_TC | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | P1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105133-0001 | J3 |
| 1 | Yellow | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | bead | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | green | LED_SMD:LED_0603_1608Metric | D5 |

NiceCircuits/NiceRAMPS
Improved version of RAMPS board with ribbon cable connecors and more.


md-sazzad-eee/ATLAS
Modular multi-robot system: a carrier robot that docks, transports, charges and redeploys two small agent robots. KiCad, FreeCAD, MATLAB/Simulink, COMSOL and ESP32 firmware.

aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.


katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)

leptun/Avionus_Flight_Controller
Controller board for autonomous RC plane

tarinaroope/msx-pulse
A diagnostic cartridge for MSX computers. Very much a work in progress. This is at proof-of-concept stage. It boots, it reads the bus, it tells you things, but it's a long way from a finished product.
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
122 parts, built around the DRV8871DDA, AP2112K-3.3, BAT54C and FDC6401N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlessioMorale/unav2_hardware repository on GitHub, at the commit this page was made from: the board is integrated_board/simpleboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).