

Main 2.3
My projects
- Size
- 201.5 × 206.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 50
- Pads
- 171
- Tracks, vias
- 309, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Main 2.3 is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 2-layer board of 201.5 × 206.6 mm with 38 parts on 50 nets, routed with 309 tracks and 13 vias.
It is built around the ESP32-DEVKITC-VE and XT60-M. Its parts include 16 connectors, 5 resistors, 4 ICs and 2 capacitors. It belongs with the ESP32 boards of this library.
Main components
2Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R13, R14 |
| 3 | XT60-M | XT60-M:XT60-M | J5, J7, J8 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R1, R12 |
| 2 | 10UF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | Conn_01x19_Male | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J14, J17 |
| 2 | MPM3610_3.3V_Buck_Converter_Breakout_-_21V_In_3.3V_Out_at_1.2A | 2.3 PCBs:MPM3610 3.3V Buck Converter Breakout - 21V In 3.3V Out at 1.2A | U2, U6 |
| 1 | Adafruit_BNO055_STEMMA_QT | 2.3 PCBs:Adafruit IMU BNO055 | U4 |
| 1 | ESP32-DEVKITC | ESP32-DEVKITC:MODULE_ESP32-DEVKITC | U3 |
| 1 | JST-XH M1 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J1 |
| 1 | JST-XH M2 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J2 |
| 1 | JST-XH M3 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J3 |
| 1 | JST-XH M4 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J4 |
| 1 | LOGIC_SWITCH | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP18 |
| 1 | Line PCB | Box IDC header 2x3:Box IDC header 2x3 | J9 |
| 1 | Logic Switch | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J13 |
| 1 | Motor Driver 1 Power | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J15 |
| 1 | Motor Driver 2 Power | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J16 |
| 1 | Motor Driver Inputs | Box IDC header 2x5:Box IDC header 2x5 | J11 |
| 1 | OpenMV H7 | Box IDC header 2x3:Box IDC header 2x3 | J12 |
| 1 | TestPoint - 3V3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | TestPoint - GND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | TestPoint - RX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | TestPoint - SCL | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | TestPoint - SDA | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | TestPoint - TX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | Voltmeter | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J6 |
More from hughminhphan/PROJECTS
12- 2 layers68 × 23.4 mm

- 4 layers133.1 × 97.6 mm

- 2 layers

- 2 layers

- 2 layers135 × 95.3 mm

- 4 layers142.5 × 86.6 mm

- 2 layers

- 2 layers

- 2 layers99 × 99 mm

- 2 layers89 × 79 mm

- 2 layers206 × 197.4 mm

- 2 layers169 × 150 mm

Similar boards
- 4 layers100.1 × 60.2 mm

Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 2 layers110 × 110 mm

- 2 layers

Placa alimentacao
edromufu/edromufu
Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.
26 parts9MIT - 2 layers107.9 × 63.2 mm

- 2 layers99.5 × 67 mm

Controller Board
kairobyte/bipedal_self_balance
A bipedal self balancing robot with 2DOF in each leg. Built from scratch.
23 parts7MIT - 4 layers65.8 × 77.2 mm

- 2 layers151.3 × 122.6 mm

Remote v2
KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.
135 parts4MIT
Questions
How big is the Main 2.3 PCB?
It measures 201.5 × 206.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main 2.3 use?
38 parts, built around the ESP32-DEVKITC-VE and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main 2.3 KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/2.3/Main 2.3 - GV2/Main 2.3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main 2.3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.