Skip to the content
2 layers260 × 150 mmAll button pcb centered, the printed circuit board in 3D

All button pcb centered

huaalan/fightbox

all button fightbox with 11 buttons

Size
260 × 150 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
23
Pads
143
Tracks, vias
122, 16
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
13 Aug 2023
Updated
30 Jan 2024

Overview

All button pcb centered is an open-source printed circuit board by huaalan, from the huaalan/fightbox repository on GitHub. It is a 2-layer board of 260 × 150 mm with 22 parts on 23 nets, routed with 122 tracks and 16 vias.

It is built around the RP2040-ZERO. Its parts include 3 switches and 1 IC. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

Fightbox

All button fightbox with 11 buttons

Firmware

Use https://gp2040-ce.info/ to flash firmware

  1. Download firmware. It is recommended to get the one for flatbox 5.
  2. Flash the firmware, connect the board to a computer with a USB cable, then press the RESET button while holding the BOOT button on the RP2040-Zero. A drive named "RPI-RP2" should appear. Copy the UF2 file you downloaded to that drive.
  3. Now that firmware has been flashed, use the built in web configurator to map buttons and configure controller (instructions at gp2040-ce.info)

Troubleshooting

Start button bind missing? If you used a firmware other than flatbox 5, try using the flatbox 5 since the pinouts for other firmware could be different.

Missing start button to get into web config after rebinding. If you can't get the start bind back from flashing firmware, you will want to do a nuke flash and reflash the flatbox firmware so you will have the default buttons. The nuke flash will wipe all configurations.

Parts

22
QtyValueFootprintReferences
14MX-NoLEDMX_Hotswap:MX-Hotswap-1U-24mmMX4, MX5, MX6, MX7, MX8, MX9, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX18
3MountingHoleMountingHole:MountingHole_6.5mmH1, H2, H3
3SW_SPSTButton_Switch_THT:SW_PUSH_6mm_H13mmSW1, SW2, SW3
1MX-NoLEDMX_Hotswap:MX-Hotswap-1U-30mmMX17
1RP2040-ZERORP2040-Zero:RP2040-ZeroU1

More from huaalan/fightbox

1
  • 2 layers260 × 150 mmAll button pcb, the printed circuit board in 3D

    All button pcb

    huaalan/fightbox

    all button fightbox with 11 buttons

    25 parts

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the All button pcb centered PCB?

It measures 260 × 150 mm and has 2 copper layers, 1.6 mm thick.

What parts does the All button pcb centered use?

22 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the All button pcb centered KiCad files?

From the huaalan/fightbox repository on GitHub, at the commit this page was made from: the board is all-button-pcb_centered.kicad_pcb and its schematic all-button-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the All button pcb centered design in my own project?

Its repository states no licence, so its author keeps all rights: ask huaalan before reusing the design.