

All button pcb
all button fightbox with 11 buttons
- Size
- 260 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 23
- Pads
- 146
- Tracks, vias
- 122, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2023
- Updated
- 30 Jan 2024
Overview
All button pcb is an open-source printed circuit board by huaalan, from the huaalan/fightbox repository on GitHub. It is a 2-layer board of 260 × 150 mm with 25 parts on 23 nets, routed with 122 tracks and 16 vias.
It is built around the RP2040-ZERO. Its parts include 3 switches and 1 IC. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdFightbox
All button fightbox with 11 buttons
Firmware
Use https://gp2040-ce.info/ to flash firmware
- Download firmware. It is recommended to get the one for flatbox 5.
- Flash the firmware, connect the board to a computer with a USB cable, then press the RESET button while holding the BOOT button on the RP2040-Zero. A drive named "RPI-RP2" should appear. Copy the UF2 file you downloaded to that drive.
- Now that firmware has been flashed, use the built in web configurator to map buttons and configure controller (instructions at gp2040-ce.info)
Troubleshooting
Start button bind missing? If you used a firmware other than flatbox 5, try using the flatbox 5 since the pinouts for other firmware could be different.
Missing start button to get into web config after rebinding. If you can't get the start bind back from flashing firmware, you will want to do a nuke flash and reflash the flatbox firmware so you will have the default buttons. The nuke flash will wipe all configurations.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | MX-NoLED | MX_Hotswap:MX-Hotswap-1U-24mm | MX4, MX5, MX6, MX7, MX8, MX9, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX18 |
| 6 | MountingHole | MountingHole:MountingHole_6.5mm | H1, H2, H3, H4, H5, H6 |
| 3 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW1, SW2, SW3 |
| 1 | MX-NoLED | MX_Hotswap:MX-Hotswap-1U-30mm | MX17 |
| 1 | rp2040-zero | RP2040-Zero:RP2040-Zero | U1 |
More from huaalan/fightbox
1- 2 layers260 × 150 mm

Similar boards
- 2 layers132.3 × 94.9 mm

- 2 layers321 × 92.3 mm

- 2 layers255.9 × 99.3 mm

Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers146.3 × 69.5 mm

- 2 layers54 × 64 mm

DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers52 × 50 mm

RP2040-TestPatternGenerator VGA
nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller
12 parts64GPL-3.0 - 2 layers120 × 40 mm

Buinchiez40
ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size
90 parts56GPL-3.0 - 2 layers305.2 × 76.2 mm

Questions
How big is the All button pcb PCB?
It measures 260 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the All button pcb use?
25 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the All button pcb KiCad files?
From the huaalan/fightbox repository on GitHub, at the commit this page was made from: the board is all-button-pcb.kicad_pcb and its schematic all-button-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the All button pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask huaalan before reusing the design.