Skip to the content
2 layers33 × 103.5 mmC21 Barebones RevB, the printed circuit board in 3D

Now with even more imagination!

Size
33 × 103.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
90
Pads
220
Tracks, vias
436, 27
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Mar 2025
Updated
16 Mar 2025

Overview

C21 Barebones RevB is an open-source printed circuit board by HotelSierraWhiskey, from the HotelSierraWhiskey/wonka-100 repository on GitHub. It is a 2-layer board of 33 × 103.5 mm with 20 parts on 90 nets, routed with 436 tracks and 27 vias.

It is built around the 0805B104K500NT and CL21A106KOQNNNE. Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the interfaces and adapters boards and the SAM D and SAM boards of this library.

Main components

2

README

README.md

🎩 The Wonka-100

A barebones devboard to help make your dreams come true

The Wonka-100 features a SAMC21N18A TQFP microcontroller, TAG-Connet SWD + debug UART interface, and a JST GH series connector for power.


Model

model

Pinout

pinout

SWD + Debug UART Interface

swd

Parts

20
QtyValueFootprintReferences
7TestPointTestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mmTP1, TP2, TP3, TP4, TP5, TP6, TP8
3100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3, C4
2Conn_01x40_PinConnector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ3, J4
2LOGOLOGOG***, G***
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
1470RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1ATSAMC21N18A-ANTSAMC21N-TQFP:QFP50P1600X1600X120-100NU1
1Conn_01x02_PinConnector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_HorizontalJ1
1LEDLED_SMD:LED_0603_1608MetricD1
1TAG_ConnectConnector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_VerticalJ2

Similar boards

  • 2 layers78 × 58 mmLighthouse, the printed circuit board in 3D

    Lighthouse

    MarcelRobitaille/lighthouse

    A PCB that controls lights in my house

    71 parts
  • 4 layers118 × 117 mmCm4-robot, the printed circuit board in 3D

    Cm4-robot

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    268 parts81
  • 4 layers60 × 53 mmYoudbetterrun, the printed circuit board in 3D

    Youdbetterrun

    youdbetterrun/youdbetterrun-pcb

    PCB for the project You'd Better Run.

    51 parts
  • 4 layers52 × 52 mmMoto gps rev a1, the printed circuit board in 3D

    Moto gps rev a1

    mx3353672833-debug/moto-gps-waveshare

    MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental

    112 parts529
  • 4 layers65.6 × 41.4 mmPicopocket, the printed circuit board in 3D

    Picopocket

    korneliuszo/picopocket-hw

    Addon for Pocket386 based on rpi pico w

    88 parts11
  • 2 layers29.3 × 73 mmGamepad pmod, the printed circuit board in 3D

    Gamepad pmod

    psychogenic/gamepad-pmod

    CH32V003-based 2xSNES controller interface PMOD

    93 parts7GPL-3.0
  • 4 layers119 × 63.2 mmOpenChordM1, the printed circuit board in 3D

    OpenChordM1

    FugLong/OpenChord

    An open-source music device for portable, expressive, and extensible audio creation.

    75 parts3MIT
  • 4 layers40 × 40 mmSTM Board V3, the printed circuit board in 3D

    STM Board V3

    Tay0710/Design_S1_006

    This project integrates hardware, firmware, and design elements to develop a fully functional autonomous 3D mapping drone system.

    46 parts3

Questions

How big is the C21 Barebones RevB PCB?

It measures 33 × 103.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the C21 Barebones RevB use?

20 parts, built around the 0805B104K500NT and CL21A106KOQNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C21 Barebones RevB KiCad files?

From the HotelSierraWhiskey/wonka-100 repository on GitHub, at the commit this page was made from: the board is C21_Barebones_RevB.kicad_pcb and its schematic C21_Barebones_RevB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the C21 Barebones RevB design in my own project?

Its repository states no licence, so its author keeps all rights: ask HotelSierraWhiskey before reusing the design.