

Youdbetterrun
PCB for the project You'd Better Run.
- Size
- 60 × 53 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 66
- Pads
- 219
- Tracks, vias
- 376, 69
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Dec 2024
- Updated
- 10 Nov 2025
Overview
Youdbetterrun is an open-source printed circuit board by youdbetterrun, from the youdbetterrun/youdbetterrun-pcb repository on GitHub. It is a 4-layer board of 60 × 53 mm with 51 parts on 66 nets, routed with 376 tracks and 69 vias.
It is built around the ESP-12F(ESP8266MOD), CP2104-F03-GMR and SPX3819M5-L-3-3/TR, with the CL21A475KBQNNNE, 0805B104K500NT and CC0805KKX7R9BB105 among its other parts. Its parts include 21 capacitors, 13 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
12ESP-12F(ESP8266MOD)
SMD,24x16mm-40℃~+85℃ -90dBm 120mA 16dBm 170mA 2.4GHz 3.3V ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesCP2104-F03-GMR
QFN-24-EP(4x4)-40℃~+85℃ 1.8V、3V~3.6V 100uA 17mA 2Mbps USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersSPX3819M5-L-3-3/TR
SOT-23-5-40℃~+125℃ 1 16V 3.3V 340mV@(500mA) 40uVrms 500mA 70dB 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCL21A475KBQNNNE
08054.7uF 50V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0805B104K500NT
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTCC0805KKX7R9BB105
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesCS2012X7R106M100NRE
080510V 10uF X7R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamwha CapacitorMultilayer Ceramic Capacitors MLCC - SMD/SMTS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)TS-1088R-02026
SMD,4x3mm100,000 cycles 12V 2.6N 2.93mm 2mm 3.9mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesCC0603KRX7R9BB103
060310nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTFH12A-24S-0.5SH(55)
SMD,P=0.5mm,卧贴-40℃~+85℃ 0.3mm 0.5mm 24P 2mm Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle Top Contact SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdYou'd Better Run!
Lets you know if you can walk leisurely to catch the bus, or if you'd better run.

This repository holds the printed circuit board design files. A render of the PCB is below.

There are separate repositories for the firmware and 3D models.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C4, C8, C9, C10, C11, C12, C13, C15, C16, C18 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R11 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C6 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C14, C17, C19 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D2, D3, D4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C21 |
| 2 | 12k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 2 | TS-1088R-02026 | youdbetterrun:TS-1088R-02026_SW_SMD_3x4mm | SW1, SW2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 10u | youdbetterrun:L_4x4x2.6 | L1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 470m | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | ESP-12F | RF_Module:ESP-12E | U2 |
| 1 | FH12A-24S-0.5SH(55) | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J4 |
| 1 | GT-USB-7010ASV | youdbetterrun:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-323_SC-70 | Q3 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
Similar boards
- 2 layers78 × 58 mm

- 2 layers92.1 × 78.1 mm

- 4 layers165 × 100 mm

Standalone scoring box
AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.
206 partsMIT - 2 layers210 × 160 mm

RF80
DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.
277 partsMIT - 2 layers13 × 50 mm

- 2 layers66.5 × 35.8 mm

- 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 2 layers33 × 103.5 mm

Questions
How big is the Youdbetterrun PCB?
It measures 60 × 53 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Youdbetterrun use?
51 parts, built around the ESP-12F(ESP8266MOD), CP2104-F03-GMR, SPX3819M5-L-3-3/TR and CL21A475KBQNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Youdbetterrun KiCad files?
From the youdbetterrun/youdbetterrun-pcb repository on GitHub, at the commit this page was made from: the board is youdbetterrun.kicad_pcb and its schematic epd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Youdbetterrun design in my own project?
Its repository states no licence, so its author keeps all rights: ask youdbetterrun before reusing the design.