

Picopocket
Addon for Pocket386 based on rpi pico w
- Size
- 65.6 × 41.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 152
- Pads
- 513
- Tracks, vias
- 1,440, 247
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Apr 2024
- Updated
- 15 Apr 2025
Overview
Picopocket is an open-source printed circuit board by korneliuszo, from the korneliuszo/picopocket-hw repository on GitHub. It is a 4-layer board of 65.6 × 41.4 mm with 88 parts on 152 nets, routed with 1,440 tracks and 247 vias.
It is built around the 74LVC245APW,118, SN74LVC1G34DBV and SN74LVC1G06DBV, with the SN74CB3T3245PW, 74HC238PW and SN74LVC02APW among its other parts. Its parts include 28 capacitors, 17 ICs, 15 resistors, 9 diodes and 3 connectors.
Main components
1274LVC245APW,118
TSSOP-20-40℃~+125℃ 1 1.2V~3.6V 2.9ns@3.3V,50pF 24mA 24mA 40uA 74LVC 8 Bidirectional Schmitt trigger Tri-State TSSOP-20 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversSN74LVC1G34DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 3.5ns@3.3V,15pF 32mA 32mA 74LVC Power-off isolation、Level shifting Push-pull Unidirectional、Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/TransceiverSN74LVC1G06DBV
SOT-23-5-40℃~+125℃ 1 1 1.07V~3.85V 1.65V~5.5V 10uA 3.5ns@5V,50pF 32mA 580mV~1.65V 74LVC Schmitt trigger SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/TransceiverSN74CB3T3245PW
TSSOP-20-40℃~+85℃ 0.25ns@3.3V,50pF 2.3V~3.6V 40uA 8/8 Output enable high-impedance、Power-off protection、Level shifting Single Supply TSSOP-20 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74HC238PW
TSSOP-16-40℃~+125℃ 160uA 2V~6V 5.2mA 5.2mA Single Supply TSSOP-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, DecodersSN74LVC02APW
TSSOP-14-40℃~+125℃ 1.65V~3.6V 1.7V~2V 1uA 2 24mA 24mA 2V 4 4.2ns@3.3V,50pF 550mV 700mV~800mV 74LVC Series NOR Gate TSSOP-14 Logic Gates ROHSTexas InstrumentsLogic Gates74LVC1G04W5
SOT-25-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-25 Inverters ROHSDiodes IncorporatedInvertersSN74LVC1G08DBVR
SOT-23-5-40℃~+105℃ 1 1.65V~5.5V 1.7V 10ns@5V,15pF 10uA 2 32mA 32mA 74LVC Series AND Gate SOT-23-5 Logic Gates ROHSUMWLogic GatesSN74LVC1G139DCU
VSSOP-8-0.5mm-40℃~+85℃ 1.65V~5.5V 10uA 2/4 32mA 32mA 4.9ns@3.3V,15pF 74LVC Decoder Power-off protection、Level shifting Single Supply VSSOP-8-0.5mm Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersSN74LVC32APW
TSSOP-14-40℃~+125℃ 1.65V~3.6V 1.7V~2V 1uA 24mA 24mA 3.6ns@3.3V,50pF 4 74LVC Series OR Gate Overvoltage-tolerant input TSSOP-14 Logic Gates ROHSTexas InstrumentsLogic GatesAR1021-I/SS
SSOP-20-208mil4、5Or8Wire Resistive Type Hardware wake-up SPI、I2C、Serial SSOP-20-208mil Touch Screen Controllers ROHSMicrochip TechnologyTouch Screen ControllersLY68L6400SLIT
SOP-8SRAMLyontek Inc.
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0201_0603Metric | C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 |
| 7 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R11 |
| 5 | ESD5Z5.0 | Diode_SMD:D_SOD-523 | D1, D2, D7, D8, D9 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C9 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R9, R13, R14 |
| 4 | ESD5Z3.3 | Diode_SMD:D_SOD-523 | D3, D4, D5, D6 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R10, R12, R15 |
| 3 | 74LVC245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3, U4, U5 |
| 2 | 100Ω@100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1µ | Capacitor_SMD:C_1206_3216Metric | C12, C13 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 74LVC1G34 | Package_TO_SOT_SMD:SOT-23-5 | U11, U12 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 74CB3T3245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | 74HC238 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U14 |
| 1 | 74LVC02 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | 74LVC1G06 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | 74LVC1G08 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | 74LVC1G139 | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U15 |
| 1 | 74LVC32 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U13 |
| 1 | AR1021 | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | IC1 |
| 1 | Audio | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_02x40_Odd_Even | libs:XKB Male 80P 0.5P | J1 |
| 1 | LY68L6400SLIT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | PCM5100 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U16 |
| 1 | Touchscreen | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | ~ | libs:MODULE_SC0918 | U1 |
The 87 most common of 88 parts.
More from korneliuszo/picopocket-hw
1- 2 layers59.3 × 18.5 mm

Similar boards
- 6 layers76 × 56 mm

CM4 MANET
ties1887/Mesh-radio-Halow-LoRa
Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.
122 parts40 - 4 layers85 × 43 mm

- 6 layers160 × 100 mm

Courant.before colored actual models 20260918T190457
KrasForge/Courant
A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.
199 partsMIT - 2 layers40 × 33 mm

- 4 layers51 × 61 mm

Gameboy MBC5 Cart QUAD FLASH - FRAM - 4-8MB
sillyhatday/GAMEBOY-MBC5-QUAD-8MB
8MB Gameboy cart using only 2MB flash chips
19 parts10CC-BY-SA-4.0 - 4 layers88 × 50 mm

- 2 layers100 × 100 mm

NESPICO RevB
spaghetti-computer/lasagna
Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.
106 parts - 2 layers175.3 × 95.3 mm

Questions
How big is the Picopocket PCB?
It measures 65.6 × 41.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Picopocket use?
88 parts, built around the 74LVC245APW,118, SN74LVC1G34DBV, SN74LVC1G06DBV and SN74CB3T3245PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picopocket KiCad files?
From the korneliuszo/picopocket-hw repository on GitHub, at the commit this page was made from: the board is board/picopocket.kicad_pcb and its schematic board/picopocket.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picopocket design in my own project?
Its repository states no licence, so its author keeps all rights: ask korneliuszo before reusing the design.