2 layers86.1 × 70.1 mm
Efi backup
HEEV/supermileageHW
Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.
58 parts2
2 layers70 × 86 mm
Current Sensor
HEEV/supermileageHW2Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.
- Size
- 70 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 81
- Pads
- 315
- Tracks, vias
- 643, 57
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Jan 2017
- Updated
- 10 Sep 2019
Overview
Current Sensor is an open-source printed circuit board by HEEV, from the HEEV/supermileageHW repository on GitHub. It is a 2-layer board of 70 × 86 mm with 84 parts on 81 nets, routed with 643 tracks and 57 vias.
It is built around the STM32F042C6U6 and MCP2562-H/P. Its parts include 29 resistors, 26 capacitors, 9 connectors, 7 ICs and 5 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2
STM32F042C6U6
UFQFPN-48(7x7)-40℃~+85℃ 1.65V~3.6V 12bit 32 Bit 32KB 38 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
README
README.mdCedarville Supermileage HW
Kicad files for PCBs on the Ceaderville Supermileage team. Also includes wiring diagrams and schematics drawn in Kicad. #Contents of Folders
-
Library Folders
- EllicottSamuel: Files I made before supermileage which were too much work to port over.
- parts_library: Files dedicated for the supermileage team.
-
Project Folders
- can_sensor: PCB to connect generic sensors to the CANBus.
- current_sensor: Three port current sensor board that connects to the CANBus. Current sensor chip is the Allegro ACS710.
- pressure_sensor: Pressure sensor board, output as an analog voltage. Supported sensors are the Honeywell ASDX100A24R, Honeywell HSCDRR004MD, and the AllSensors G4V-Mini.
- Sting: wiring diagrams and schematics for Sting produced using Kicad.
- wiring diagrams: kicad files for the wiring diagrams.
- schematics: kicad files for the schematics.
- Urbie: wiring diagrams and schematics for Urbie produced using Kicad.
- wiring diagrams: kicad files for the wiring diagrams.
- schematics: kicad files for the schematics.
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uf | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5, C6, C10, C11, C13, C16, C17, C18, C20, C22, C24, C26 |
| 9 | 1k3 | Resistors_SMD:R_0603_HandSoldering | R9, R11, R13, R19, R21, R23, R25, R27, R29 |
| 4 | 1uf | Capacitors_SMD:C_0603_HandSoldering | C19, C21, C23, C25 |
| 3 | 120R | Resistors_SMD:R_0603_HandSoldering | R15, R16, R17 |
| 3 | 18k | Resistors_SMD:R_0603_HandSoldering | R8, R26, R28 |
| 3 | 1k | Resistors_SMD:R_0603_HandSoldering | R1, R3, R5 |
| 3 | 1nf | Capacitors_SMD:C_0603_HandSoldering | C1, C8, C14 |
| 3 | 2k | Resistors_SMD:R_0603_HandSoldering | R2, R4, R6 |
| 3 | 4.7nf | Capacitors_SMD:C_0603_HandSoldering | C2, C9, C15 |
| 3 | 4k7 | Resistors_SMD:R_0603_HandSoldering | R12, R18, R20 |
| 3 | 8k2 | Resistors_SMD:R_0603_HandSoldering | R10, R22, R24 |
| 3 | ACS710 | Supermileage:DIP-16-SchmartBoard | U1, U3, U5 |
| 3 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P10, P11, P12 |
| 3 | D_Schottky_Small | Diodes_SMD:SOD-123 | D3, D4, D5 |
| 3 | Ultra-Fit | supermileage_footprints:Molex-UltraFit-4p | S1, S2, S3 |
| 2 | 100K | Resistors_SMD:R_0603_HandSoldering | R7, R14 |
| 2 | 10uf | Capacitors_SMD:C_0603_HandSoldering | C7, C12 |
| 1 | BOOT | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW2 |
| 1 | CAN_IN | User_Connectors:Molex-duraClick-4conn | P1 |
| 1 | CAN_OUT | User_Connectors:Molex-duraClick-4conn | P2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P7 |
| 1 | DuraClik-5 | User_Connectors:Molex-duraClick-5conn | P3 |
| 1 | LED1 | LEDs:LED-3MM | D1 |
| 1 | LED2 | LEDs:LED-3MM | D2 |
| 1 | LOGO | Random:TwoFacedMan | G*** |
| 1 | MIC5317 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | NJM2870F0 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | RESET | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW1 |
| 1 | Reverse | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | STM32F042C6 | Housings_QFP:TQFP-48_7x7mm_Pitch0.5mm | U6 |
| 1 | Term | Pin_Headers:Pin_Header_Straight_1x02 | P9 |
| 1 | USB | Connect:USB_Micro-B | P8 |
| 1 | mcp2562 | SMD_Packages:SOIC-8-N | U7 |
The 83 most common of 84 parts.
Questions
How big is the Current Sensor PCB?
It measures 70 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Current Sensor use?
84 parts, built around the STM32F042C6U6 and MCP2562-H/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Current Sensor KiCad files?
From the HEEV/supermileageHW repository on GitHub, at the commit this page was made from: the board is current_sensor/Current Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Current Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask HEEV before reusing the design.
More from HEEV/supermileageHW
4- 2 layers53.3 × 25.4 mm
Can sensor
HEEV/supermileageHW
Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.
54 parts2 - 2 layers91.4 × 57 mm
KarkPower
HEEV/supermileageHW
Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.
39 parts2 - 2 layers25.4 × 25.4 mm
Pitot tube v1
HEEV/supermileageHW
Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.
22 parts2
Similar boards
- 2 layers15.2 × 55.4 mm
CANine V1.4
motionlayer/CANine
Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter
33 parts14MIT - 4 layers90 × 153 mm
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.
139 parts189MIT - 2 layers
- 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 4 layers108 × 54 mm
MCU Powertrain
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
163 parts43GPL-3.0 - 2 layers86.4 × 54.6 mm
- 4 layers100 × 54 mm
- 2 layers
