
MCP2562-H/P
Microchip TechnologyExtended
-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHS
- Part id
- microchip/MCP2562-H/P
- Category
- CAN Transceivers
- Package
- PDIP-8
- Pins
- 8
- In stock
- 0 at JLCPCB (C640348)
- Used on
- 100 open-source boards
Overview
The MCP2562-H/P is a CAN Transceiver made by Microchip Technology in a PDIP-8 package with 9 pins. -40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHS.
PCBKit's library has its KiCad symbol (agg-kicad:MCP2562, from Agg-kicad) and its footprint (agg:DFN-8-EP-MICROCHIP, from Agg-kicad), ready for a KiCad board. JLCPCB lists it (part C640348). 100 open-source boards in 51 repositories on GitHub use it.
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | TXD | Input |
| 2 | VSS | Power in |
| 3 | VDD | Power in |
| 4 | RXD | Output |
| 5 | VIO | Power in |
| 6 | CANL | Tri-state |
| 7 | CANH | Tri-state |
| 8 | STBY | Input |
| EP | VSS | Power in |
- 2 layers

- 4 layers40 × 40 mm

CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 4 layers108 × 54 mm

MCU Powertrain
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
163 parts43GPL-3.0 - 2 layers86.4 × 54.6 mm

- 4 layers100 × 54 mm

- 2 layers

- 2 layers160 × 100 mm

Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause - 2 layers100 × 50 mm

Parts like it
8MCP2562-E/MF
DFN-8-EP(3x3)-40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 70mA CAN Transceiver DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562M/TR-HG
SOP-8Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Short-Circuit Protection、Integrated level shifting SOP-8 CAN Transceivers ROHSHGSEMICAN TransceiversMCP2562FD-H/SN
SOIC-8-40℃~+150℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562FD-E/P
PDIP-8-40℃~+125℃ 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-E/P
PDIP-8-40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-H/SN
SOIC-8-40℃~+150℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-H/MF
DFN-8-EP(3x3)-40℃~+150℃ 4.5V~5.5V DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562FD-H/MF
DFN-8(3x3)-40℃~+150℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver DFN-8(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
Questions
Is there a KiCad symbol and footprint for the MCP2562-H/P?
Yes. The symbol is agg-kicad:MCP2562 and the footprint agg:DFN-8-EP-MICROCHIP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP2562-H/P?
PDIP-8, with 9 pins. Its footprint is drawn on this page.
Where is the MCP2562-H/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP2562-H/P?
JLCPCB lists it as part C640348, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MCP2562-H/P?
Parts like it in the library: the MCP2562-E/MF by Microchip Technology, the MCP2562M/TR-HG by HGSEMI, the MCP2562FD-H/SN by Microchip Technology and the MCP2562FD-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP2562-H/P?
100 boards in 51 repositories on GitHub; the most starred are listed on this page, with their KiCad files.