2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT
2 layers100 × 50 mm
C6021light
deltaphi/c6021light5Feature-compact DIY version of the c6021
- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 95
- Pads
- 320
- Tracks, vias
- 897, 69
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jun 2020
- Updated
- 29 Oct 2026
Overview
C6021light is an open-source printed circuit board by deltaphi, from the deltaphi/c6021light repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 50 mm with 79 parts on 95 nets, routed with 897 tracks and 69 vias.
It is built around the CH340C, ISO1050DUB and MCP2562-H/P, with the SN75176N, L7805 and LM393 among its other parts. Its parts include 23 resistors, 17 connectors, 14 capacitors, 7 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ISO1050DUB
SOP-8-2.54mm-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8-2.54mm Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN Transceivers
MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
SN75176N
DIP-80℃~+70℃ 1 1 10Mbps 32 4.5V~5.5V 900uA Enable shutdown、Thermal shutdown protection Half-Duplex Transceiver ±8kV DIP-8 RS-485 / RS-422 ICs ROHSHGSEMIRS-485 / RS-422 ICs
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparators
BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
bluepill/hardware/README.mdAenderungen
1.0 Initiale Version
1.1 2020/06
CAN RJ45 Pin 5 getrennt um CdB konform zu bleiben
Buchse verschoben damit die gewinkelte Version besser passt
DCDC Enable 12V getrennt
Mehr Platz fuer DCDC Wandler
USB/Seriell Wandler: 0 Ohm Widerstaende entfernt
UART Leiste angepasst
1.2 2020/12
Loconet C32 entfernt
1.3 2021/01
TxD und RxD getauscht auf J52 Pin Header für Standard USB2Serial Module
1.4 2021/03
mehr Platz für Spannungsregler
C30 wahlweise 2,5 oder 5 mm Rastermaß
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C31 |
| 4 | 1k5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R38, R39, R40 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_NB | J7, J10, J11, J32 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D20, D21 |
| 2 | 12 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R30, R31 |
| 2 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 3k3 | w_pth_resistors:RC03 | R14, R15 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q31, Q32 |
| 2 | Conn_01x01 | TestPoint:Test_Point_NA | TP1, TP2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J6 |
| 2 | Jumper_NO_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 1 | 0 | Resistor_THT:R_AXIAL_0_WIRE | R4 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C51 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C10 |
| 1 | 10k | w_pth_resistors:RC03 | R42 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R37 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C52 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C50 |
| 1 | 120 | w_pth_resistors:RC03 | R13 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 150k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R33 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 240k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R36 |
| 1 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R35 |
| 1 | 39k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R34 |
| 1 | 47 | w_pth_resistors:RC03 | R41 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R32 |
| 1 | 47p | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mm | C30 |
| 1 | 5V DCDC | Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT | PS1 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q30 |
| 1 | Barrel_Jack_Switch | w_conn_misc:dc_socket | J1 |
| 1 | BluePill_1 | YAAJ_STM32:YAAJ_BluePill | BP1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U50 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J31 |
| 1 | Conn_01x06 | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J51 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x16_Row_Letter_First | Connector_DIN:DIN41612_B2_2x16_Female_Vertical_THT | J3 |
| 1 | Debug UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J52 |
| 1 | Grove I2C | w_conn_jst-ph:b4b-ph-kl | J5 |
| 1 | ISO1050DUB | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U4 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | L7808 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM393 | w_pth_circuits:dil_8-300_socket | U30 |
| 1 | Loconet | Connector_RJ:RJ12_Amphenol_54601 | J30 |
| 1 | MCP2562 | w_pth_circuits:dil_8-300_socket | U3 |
| 1 | RJ45 | w_conn_pc:mebp8 | J8 |
| 1 | SN75176 | w_pth_circuits:dil_8-300_socket | U10 |
| 1 | SW_Push | w_switch:PCB_PUSH | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J50 |
| 1 | XpressNet | Connector_RJ:RJ12_Amphenol_54601 | J12 |
The 74 most common of 79 parts.
Similar boards
- 2 layers100 × 100 mm
- 2 layers82.2 × 61.5 mm
- 2 layers111 × 91.4 mm
- 2 layers93 × 60 mm
- 2 layers
ATMEGA 32 2
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
54 partsMIT - 2 layers259.7 × 159.5 mm
- 4 layers128 × 79 mm
Questions
How big is the C6021light PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C6021light use?
79 parts, built around the CH340C, ISO1050DUB, MCP2562-H/P and SN75176N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C6021light KiCad files?
From the deltaphi/c6021light repository on GitHub, at the commit this page was made from: the board is bluepill/hardware/c6021light.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C6021light design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).