2 layers
2 layers
M3radio
cuspaceflight/m3-avionics92Martlet 3 Avionics
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 116
- Pads
- 326
- Tracks, vias
- 946, 153
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Nov 2015
- Updated
- 28 Oct 2017
Overview
M3radio is an open-source printed circuit board by cuspaceflight, from the cuspaceflight/m3-avionics repository on GitHub. It is a 2-layer board with 61 parts on 116 nets, routed with 946 tracks and 153 vias.
It is built around the MCP2562-H/P and MAX-7Q. Its parts include 29 capacitors, 9 inductors, 6 ICs, 6 connectors and 5 resistors. It belongs with the STM32 boards of this library.
Main components
2README
README.mdMartlet III Avionics
This repository contains all the avionics for Martlet 3, including system design, documentation, schematics, PCBs, and firmware.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | agg:0402 | C104, C105, C107, C108, C109, C112, C202 |
| 4 | 1uF | agg:0402 | C2, C3, C7, C8 |
| 3 | 100 | agg:0402 | R101, R102, R103 |
| 3 | 6.8nH | agg:0603-L | L204, L205, L206 |
| 3 | 91nH | agg:0402-L | L1, L2, L3 |
| 2 | 100nF | agg:0402 | C1, C113 |
| 2 | 10p | agg:0402 | C101, C102 |
| 2 | 2µ2 | agg:0402 | C110, C111 |
| 2 | COAX | M3radio:U.FL-R-SMT-1 | P101, P201 |
| 2 | ESD_DIODE | agg:0402 | D1, D2 |
| 1 | 1.2pF | agg:0402 | C205 |
| 1 | 10 | agg:0603 | R1 |
| 1 | 100p | agg:0402 | C201 |
| 1 | 100pF | agg:0402 | C5 |
| 1 | 10nF | agg:0402 | C4 |
| 1 | 10pF | agg:0402 | C207 |
| 1 | 110k | agg:0402 | R2 |
| 1 | 120nH | agg:0603-L | L201 |
| 1 | 18nH | agg:0603-L | L202 |
| 1 | 1u | agg:0402 | C6 |
| 1 | 1µ | agg:0402 | C106 |
| 1 | 22nH | agg:0603-L | L203 |
| 1 | 26M | agg:XTAL-20x16 | Y101 |
| 1 | 3.3pF | agg:0402 | C206 |
| 1 | 36pF | agg:0402 | C204 |
| 1 | 3pF | agg:0402 | C203 |
| 1 | 4.7pF | agg:0402 | C208 |
| 1 | 4µ7 | agg:0402 | C103 |
| 1 | EAST BOT | agg:SFML-110-02-L-D-LC | J104 |
| 1 | EAST TOP | agg:TFML-110-02-L-D | J103 |
| 1 | GRN | agg:0603-LED | D102 |
| 1 | MAX-7Q | M3radio:MAX-7Q | IC103 |
| 1 | MCP2562 | agg:DFN-8-EP-MICROCHIP | IC102 |
| 1 | NCP380 | agg:DFN-6-EP-ONSEMI | IC1 |
| 1 | NCP4620 | agg:SC-70-5 | U1 |
| 1 | RED | agg:0603-LED | D101 |
| 1 | STM32F405RxTx | agg:LQFP-64 | IC101 |
| 1 | Si4460 | agg:QFN-20-EP-SI | IC201 |
| 1 | TCXO | agg:TG-5006CG | Y201 |
| 1 | WEST BOT | agg:SFML-110-02-L-D-LC | J102 |
| 1 | WEST TOP | agg:TFML-110-02-L-D | J101 |
Questions
What parts does the M3radio use?
61 parts, built around the MCP2562-H/P and MAX-7Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M3radio KiCad files?
From the cuspaceflight/m3-avionics repository on GitHub, at the commit this page was made from: the board is m3radio/pcb_r1/m3radio.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M3radio design in my own project?
Its repository states no licence, so its author keeps all rights: ask cuspaceflight before reusing the design.
More from cuspaceflight/m3-avionics
1Similar boards
- 2 layers50 × 75 mm
M2r
cuspaceflight/m2-electronics
This repository contains the schematics, PCB designs and firmware for the various electronic systems onboard Martlet 2.
118 parts5 - 2 layers89.5 × 48 mm
Avionics
cuspaceflight/avionics14
Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
115 parts4 - 2 layers56 × 56 mm
- 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 4 layers108 × 54 mm
MCU Powertrain
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
163 parts43GPL-3.0 - 2 layers86.4 × 54.6 mm
- 4 layers100 × 54 mm
- 2 layers
