4 layers100 × 70 mm
2 layers89.5 × 48 mm
Avionics
cuspaceflight/avionics144Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
- Size
- 89.5 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 144
- Pads
- 489
- Tracks, vias
- 1,299, 129
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Oct 2014
- Updated
- 30 Mar 2016
Overview
Avionics is an open-source printed circuit board by cuspaceflight, from the cuspaceflight/avionics14 repository on GitHub. It is a 2-layer board of 89.5 × 48 mm with 115 parts on 144 nets, routed with 1,299 tracks and 129 vias.
It is built around the STM32F405VGT6, MS5611-01BA03 and ADXL345-EP, with the HMC5883L, L3G4200D and MAX-7Q among its other parts. Its parts include 40 resistors, 32 capacitors, 11 diodes, 9 ICs and 9 connectors. It belongs with the STM32 boards of this library.
Main components
8
STM32F405VGT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure Sensors
ADXL345-EP
LGA-14(3x5x0.8)LGA-14(3x5x0.8) New Arrivals ROHSAnalog DevicesUncategorised
HMC5883L
LGA-16_L3.0-W3.0-P0.50LPCC-16(3x3) New Arrivals ROHSHoneywellUncategorised
L3G4200D
LGA-16(4x4)-40℃~+85℃ 16bit 2.4V~3.6V 5uA Gyroscope SPI、I2C X,Y,Z ±2000dps 运动事件检测 LGA-16(4x4) Accelerometers ROHSSTMicroelectronicsAccelerometers
MAX-7Q
LCC-18LCC-18 New Arrivals ROHSu-bloxUncategorised
CGA0402MLC-12G
04020.5pF@1MHz 12V 30V 0402 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
FDN304P
SOT-23-55℃~+150℃ 1 P-Channel 1.312nF 1.5V 100mΩ@1.8V 106pF 2.4A 20V 20nC@4.5V 240pF 500mW P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdCUSF Avionics 2014
Firmware Compilation
Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
The project should simply compile with
makeParts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | avionics14:0603 | C102, C103, C105, C109, C110, C112, C114, C201, C203, C204, C401, C703, C704, C705, C708, C709 |
| 12 | 51k | avionics14:0603 | R401, R402, R403, R404, R507, R508, R509, R510, R517, R518, R519, R520 |
| 8 | 100k | avionics14:0603 | R503, R504, R505, R506, R513, R514, R515, R516 |
| 7 | 10k | avionics14:0603 | R701, R702, R703, R704, R705, R706, R707 |
| 5 | 130 | avionics14:0603 | R601, R603, R605, R607, R608 |
| 5 | CONN_01X02 | avionics14:S02B-PASK-2 | P101, P501, P502, P503, P504 |
| 4 | 1k | avionics14:0603 | R501, R502, R511, R512 |
| 4 | 2µ2 | avionics14:0603 | C111, C113, C115, C117 |
| 4 | CGA0402MLC-12G | avionics14:R0402 | D501, D502, D503, D504 |
| 4 | FDN304P | avionics14:SOT23 | Q502, Q503, Q505, Q506 |
| 4 | LED_GREEN | avionics14:0603_LED | D601, D603, D605, D607 |
| 4 | VAL** | avionics14:M3_MOUNT | M3_MOUNT, M3_MOUNT, M3_MOUNT, M3_MOUNT |
| 3 | 10µ | avionics14:0603 | C101, C701, C702 |
| 3 | 150 | avionics14:0603 | R602, R604, R606 |
| 3 | LED_RED | avionics14:0603_LED | D602, D604, D606 |
| 2 | 10n | avionics14:0603 | C108, C706 |
| 2 | 15p | avionics14:0603 | C106, C107 |
| 2 | IRF7910 | avionics14:SO-8 | Q501, Q504 |
| 2 | SMA | avionics14:SMA-142-0701-801 | P201, P202 |
| 1 | 100 | avionics14:0603 | R101 |
| 1 | 1n | avionics14:0603 | C116 |
| 1 | 1µ | avionics14:0603 | C104 |
| 1 | 220n | avionics14:0603 | C711 |
| 1 | 470n | avionics14:0603 | C707 |
| 1 | 4µ7 | avionics14:0603 | C710 |
| 1 | 8M | avionics14:XTAL50x32 | X101 |
| 1 | ADP3335 | avionics14:MSOP8 | IC102 |
| 1 | ADXL345 | avionics14:ADXL3x5 | IC701 |
| 1 | BUZZER | avionics14:ABI-042-RC | ABI-042-RC601 |
| 1 | CONN_01X04 | avionics14:S04B-PASK-2 | P102 |
| 1 | HMC5883L | avionics14:HMC5883L | IC704 |
| 1 | L3G4200D | avionics14:L3G4200D | IC702 |
| 1 | LOGO | avionics14:cusf_logo_small | G*** |
| 1 | LOGO | avionics14:cusf_logo_full | G*** |
| 1 | MAX-7Q | avionics14:MAX-7Q | IC201 |
| 1 | MICROSD_HOLDER | avionics14:MEM2051 | U401 |
| 1 | MS5611-01BA03 | avionics14:MS5611-01BA | IC703 |
| 1 | RFM69W | avionics14:rfm69w | U202 |
| 1 | STM32F405VGT | avionics14:LQFP100 | IC101 |
| 1 | SWD | avionics14:FTSH-105-01-F-D-K | P103 |
Questions
How big is the Avionics PCB?
It measures 89.5 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Avionics use?
115 parts, built around the STM32F405VGT6, MS5611-01BA03, ADXL345-EP and HMC5883L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avionics KiCad files?
From the cuspaceflight/avionics14 repository on GitHub, at the commit this page was made from: the board is pcb/avionics.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avionics design in my own project?
Its repository states no licence, so its author keeps all rights: ask cuspaceflight before reusing the design.
Similar boards
- 2 layers77.2 × 49.8 mm
- 2 layers50 × 75 mm
M2r
cuspaceflight/m2-electronics
This repository contains the schematics, PCB designs and firmware for the various electronic systems onboard Martlet 2.
118 parts5 - 2 layers58 × 35 mm
- 2 layers25.4 × 17.8 mm
L3G4200
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
30 parts56Apache-2.0 - 2 layers
- 2 layers20.3 × 52.1 mm
Accl magn pmod
s59mz/kicad-accl-magn-pmod
Pmod module for ADXL345 Accelerometer and HMC5883L Magnetometer
16 parts1GPL-3.0 - 4 layers50.5 × 36 mm
FMU v171-imported
yagamy4680/drone-study
AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)
118 parts