Skip to the content
2 layers53.3 × 25.4 mmCan sensor, the printed circuit board in 3D

Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.

Size
53.3 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
54
Nets
53
Pads
185
Tracks, vias
644, 46
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
10 Jan 2017
Updated
10 Sep 2019

Overview

Can sensor is an open-source printed circuit board by HEEV, from the HEEV/supermileageHW repository on GitHub. It is a 2-layer board of 53.3 × 25.4 mm with 54 parts on 53 nets, routed with 644 tracks and 46 vias.

It is built around the STM32F042C6U6 and MCP2562-H/P. Its parts include 20 capacitors, 11 resistors, 7 connectors, 4 ICs and 4 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.

Main components

2

README

README.md

Cedarville Supermileage HW

Kicad files for PCBs on the Ceaderville Supermileage team. Also includes wiring diagrams and schematics drawn in Kicad. #Contents of Folders

  • Library Folders

    • EllicottSamuel: Files I made before supermileage which were too much work to port over.
    • parts_library: Files dedicated for the supermileage team.
  • Project Folders

    • can_sensor: PCB to connect generic sensors to the CANBus.
    • current_sensor: Three port current sensor board that connects to the CANBus. Current sensor chip is the Allegro ACS710.
    • pressure_sensor: Pressure sensor board, output as an analog voltage. Supported sensors are the Honeywell ASDX100A24R, Honeywell HSCDRR004MD, and the AllSensors G4V-Mini.
    • Sting: wiring diagrams and schematics for Sting produced using Kicad.
      • wiring diagrams: kicad files for the wiring diagrams.
      • schematics: kicad files for the schematics.
    • Urbie: wiring diagrams and schematics for Urbie produced using Kicad.
      • wiring diagrams: kicad files for the wiring diagrams.
      • schematics: kicad files for the schematics.

Parts

54
QtyValueFootprintReferences
100.1ufCapacitors_SMD:C_0603_HandSolderingC2, C4, C6, C8, C9, C10, C12, C14, C16, C18
510ufCapacitors_SMD:C_0603_HandSolderingC1, C3, C7, C19, C20
51ufCapacitors_SMD:C_0603_HandSolderingC5, C11, C13, C15, C17
4RResistors_SMD:R_0603_HandSolderingR2, R3, R5, R6
3100KResistors_SMD:R_0603_HandSolderingR1, R8, R9
3120RResistors_SMD:R_0603_HandSolderingR10, R11, R12
2D_Zener_SmallDiodes_SMD:SOD-123D1, D2
1BOOTButtons_Switches_SMD:SW_SPST_FSMSMSW2
1CAN_INUser_Connectors:Molex-duraClick-4connP6
1CAN_OUTUser_Connectors:Molex-duraClick-4connP7
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P4
1IO1User_Connectors:Molex-duraClick-4connP1
1IO2User_Connectors:Molex-duraClick-4connP2
1JumpResistors_SMD:R_0603R13
1LED1LEDs:LED_0603D8
1LED2LEDs:LED_0603D9
1LOGOUser_Random:TwoFacedManG***
1MIC5317TO_SOT_Packages_SMD:SOT-23-5U2
1NJM2870F0TO_SOT_Packages_SMD:SOT-23-5U1
1Q_PMOS_GSDTO_SOT_Packages_SMD:SOT-23_HandsolderingQ1
1RESETButtons_Switches_SMD:SW_SPST_FSMSMSW1
1STM32F042C6Housings_QFP:TQFP-48_7x7mm_Pitch0.5mmU3
1TERMPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmP8
1USBConnect:USB_Micro-BP5
1mcp2562SMD_Packages:SOIC-8-NU4

The 50 most common of 54 parts.

More from HEEV/supermileageHW

4
  • 2 layers70 × 86 mmCurrent Sensor, the printed circuit board in 3D

    Current Sensor

    HEEV/supermileageHW

    Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.

    84 parts2
  • 2 layers86.1 × 70.1 mmEfi backup, the printed circuit board in 3D

    Efi backup

    HEEV/supermileageHW

    Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.

    58 parts2
  • 2 layers91.4 × 57 mmKarkPower, the printed circuit board in 3D

    KarkPower

    HEEV/supermileageHW

    Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.

    39 parts2
  • 2 layers25.4 × 25.4 mmPitot tube v1, the printed circuit board in 3D

    Pitot tube v1

    HEEV/supermileageHW

    Hardware (schematics, wiring-diagrams, PCBs) for the Cedarville Supermileage team.

    22 parts2

Similar boards

  • 2 layers15.2 × 55.4 mmCANine V1.4, the printed circuit board in 3D

    CANine V1.4

    motionlayer/CANine

    Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter

    33 parts14MIT
  • 4 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    139 parts189MIT
  • 2 layersM3radio, the printed circuit board in 3D

    M3radio

    cuspaceflight/m3-avionics

    Martlet 3 Avionics

    61 parts92
  • 4 layers40 × 40 mmCANBoard, the printed circuit board in 3D

    CANBoard

    corygrant/CANBoard

    Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.

    83 parts53MIT
  • 4 layers108 × 54 mmMCU Powertrain, the printed circuit board in 3D

    MCU Powertrain

    mark-belbin/motor-controller

    Custom FOC motor controller designed for underwater robotics.

    163 parts43GPL-3.0
  • 2 layers86.4 × 54.6 mmBbbmini, the printed circuit board in 3D

    Bbbmini

    mirkix/BBBMINI-PCB

    BBBmini Cape PCB

    37 parts40
  • 4 layers100 × 54 mmKbox, the printed circuit board in 3D

    Kbox

    sarfata/kbox-hardware

    Open-source electronics for your boat

    139 parts19
  • 2 layersM4psu, the printed circuit board in 3D

    M4psu

    cuspaceflight/m4-avionics

    Martlet 4 Avionics

    246 parts8

Questions

How big is the Can sensor PCB?

It measures 53.3 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Can sensor use?

54 parts, built around the STM32F042C6U6 and MCP2562-H/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Can sensor KiCad files?

From the HEEV/supermileageHW repository on GitHub, at the commit this page was made from: the board is can_sensor/can_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Can sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask HEEV before reusing the design.