2 layers61 × 111.8 mm
Profane geometry jackboard
hearthsinger/profane-geometry
Digitally controlled triangle-core VCO with 4 individual waveshapes, plus one mix output with per-wave attenuation
23 parts
4 layers61 × 76.2 mm
Profane geometry
hearthsinger/profane-geometryDigitally controlled triangle-core VCO with 4 individual waveshapes, plus one mix output with per-wave attenuation
- Size
- 61 × 76.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 148
- Nets
- 124
- Pads
- 465
- Tracks, vias
- 1,377, 176
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2021
- Updated
- 1 Dec 2021
Overview
Profane geometry is an open-source printed circuit board by hearthsinger, from the hearthsinger/profane-geometry repository on GitHub. It is a 4-layer board of 61 × 76.2 mm with 148 parts on 124 nets, routed with 1,377 tracks and 176 vias.
It is built around the MCP4728-E/UN, TL072 and AP2112K-3.3, with the LM1117-5.0 and MMBF4416A among its other parts. Its parts include 71 resistors, 36 capacitors, 11 ICs, 5 diodes and 4 connectors. It belongs with the SAM D and SAM boards of this library.
Main components
5
MCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
LM1117-5.0
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
MMBF4416A
SOT-23-55℃~+150℃ 1 N-channel 15mA 225mW N-Channel SOT-23 JFETs ROHSonsemiMOSFETs
README
README.mdProfane Geometry
I'm making (attempting) a Eurorack Module.
What is it?
It's gonna be an oscillator builder/mixer based on a digitally-controlled Triangle Core VCO I found in a research paper. It will be controlled by the atsamd21 or atsamd11 (depending on what I end up needing and what is in stock) family of MCUs and have firmware written in Rust!
Dang aren't you like a web developer?
Yes. I've only barely figured out the building blocks of some of this stuff, and my knowledge extends to pretty much exactly what I've built so far. There are almost certainly issues with it. The OSHW community is great though and people who publish the source/schematics for their Eurorack modules have been a massive, massive help.
Dang isn't there like a global parts shortage.
Yes. It's annoying.
Dang can I make one of these?
Sure. Probably it will be bad.
What's in this repo?
- The
./profane_geometrydirectory houses the KiCad project for the oscillator board - The
./profane_geometry_jackboarddirectory houses the KiCad project for the jackboard - The
./firmaredirectory contains some testing firmare designed for the first iteration of the jackboard, which allows for an Adafruit Feather M0 to be attached with breadboard-pitch pin sockets
Parts
148| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R11, R16, R17, R20, R25, R31, R34, R35, R39, R40, R45, R47 +7 |
| 20 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C12, C13, C14, C15, C16, C17, C22, C23, C24, C25, C26, C27, C30, C31, C33 +4 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R8, R12, R18, R29, R32, R61 |
| 6 | 47k | Resistor_SMD:R_0805_2012Metric | R22, R26, R37, R42, R49, R54 |
| 5 | 22k | Resistor_SMD:R_0805_2012Metric | R27, R41, R46, R53, R58 |
| 5 | 30.1k | Resistor_SMD:R_0805_2012Metric | R30, R38, R44, R50, R56 |
| 5 | TL074 | Package_SO:SSOP-14_5.3x6.2mm_P0.65mm | U3, U4, U5, U6, U7 |
| 4 | 1N5819 | Diode_SMD:D_SOD-123 | D2, D3, D4, D5 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C6, C9, C32 |
| 4 | 2.2M | Resistor_SMD:R_0805_2012Metric | R36, R43, R48, R55 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R68, R69, R70, R71 |
| 4 | 47pF | Capacitor_SMD:C_0805_2012Metric | C18, C19, C20, C21 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R33, R62, R65 |
| 3 | 240k | Resistor_SMD:R_0805_2012Metric | R24, R63, R66 |
| 3 | FB | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | FB1, FB2, FB3 |
| 2 | 2.2nF | Capacitor_SMD:C_0805_2012Metric | C8, C29 |
| 2 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.7 | C1, C2 |
| 2 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1, J2 |
| 1 | 169k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 2.87k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 22pF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 3.57k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.12k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C28 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 47nF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 49.9k | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 5.6k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric | R67 |
| 1 | 64.9k | Resistor_SMD:R_0805_2012Metric | R64 |
| 1 | 7.15k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 8.25k | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ATSAMD21G18A-AUT | Package_QFP:TQFP-48_7x7mm_P0.5mm | U11 |
| 1 | D_SCL | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | D_SDA | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | GND_Net_Tie | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | LM1117-5 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | L_SCL | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | L_SDA | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U10 |
| 1 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MMBF4416A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | NSL | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | Notch | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | POT | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | PSL | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | PWM | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | PWR | zzzzzzzz:SunLED-Rev-2-PLCC-SeeThru | D1 |
| 1 | Pulse | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | RESET_SW | zzzzzzzz:SPST_TL3365AF180QG_SMD | SW1 |
| 1 | SSL | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | Square | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | TSL | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | TagConect SWD | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | Tri | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J3 |
| 1 | V/OCT | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
More from hearthsinger/profane-geometry
1Similar boards
- 2 layers58.4 × 108.7 mm
Circuit pcb
Testbild-synth/dual-vcadsr
Dual Voltage controlled envelope/LFO/Random (Sample/hold) eurorack module
69 parts14 - 2 layers109.4 × 108.5 mm
- 4 layers154.9 × 128.4 mm
Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 2 layers38 × 100 mm
- 2 layers80.8 × 99.9 mm
Circuit board
ltrooney/diy-synth
A repository containing a handful of utilities for my DIY Eurorack-based modular synthesizer. Snippets include a virtual wavetable oscillator, a step sequencer, and more.
71 parts7 - 2 layers40 × 110 mm
- 2 layers109.2 × 91.4 mm
FunctionGeneratorCortexM4
cracked-machine/FunctionGeneratorCortexM4_HW
A function generator powered by ARM Cortex M4
119 parts2MIT - 4 layers100 × 83.4 mm
Questions
How big is the Profane geometry PCB?
It measures 61 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Profane geometry use?
148 parts, built around the MCP4728-E/UN, TL072, AP2112K-3.3 and LM1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Profane geometry KiCad files?
From the hearthsinger/profane-geometry repository on GitHub, at the commit this page was made from: the board is profane_geometry/profane_geometry.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Profane geometry design in my own project?
Its repository states no licence, so its author keeps all rights: ask hearthsinger before reusing the design.