
Profane geometry
hearthsinger/profane-geometry
Digitally controlled triangle-core VCO with 4 individual waveshapes, plus one mix output with per-wave attenuation

Digitally controlled triangle-core VCO with 4 individual waveshapes, plus one mix output with per-wave attenuation
Profane geometry jackboard is an open-source printed circuit board by hearthsinger, from the hearthsinger/profane-geometry repository on GitHub. It is a 2-layer board of 61 × 111.8 mm with 23 parts on 55 nets, routed with 374 tracks and 77 vias.
It is built around the APA102-2020 and PTL30-19G1-103B2. Its parts include 10 connectors and 8 diodes.
I'm making (attempting) a Eurorack Module.
It's gonna be an oscillator builder/mixer based on a digitally-controlled Triangle Core VCO I found in a research paper. It will be controlled by the atsamd21 or atsamd11 (depending on what I end up needing and what is in stock) family of MCUs and have firmware written in Rust!
Yes. I've only barely figured out the building blocks of some of this stuff, and my knowledge extends to pretty much exactly what I've built so far. There are almost certainly issues with it. The OSHW community is great though and people who publish the source/schematics for their Eurorack modules have been a massive, massive help.
Yes. It's annoying.
Sure. Probably it will be bad.
./profane_geometry directory houses the KiCad project for the oscillator board./profane_geometry_jackboard directory houses the KiCad project for the jackboard./firmare directory contains some testing firmare designed for the first iteration of the jackboard, which allows for an Adafruit Feather M0 to be attached with breadboard-pitch pin sockets| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | APA102-2020 | LED_SMD:LED-APA102-2020 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | PTL30-19G1-103B2 | profane_geometry_jackboard:Slider_Potentiometer_Bourns_PTL_30mm | VR1, VR2, VR3, VR4 |
| 2 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | MixOut | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J15 |
| 1 | NotchOut | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J11 |
| 1 | PulseCV | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J14 |
| 1 | PulseOut | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J8 |
| 1 | PulsePot | Potentiometer_THT:Potentiometer_TT_P0915N | RV2 |
| 1 | SquareOut | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J6 |
| 1 | TriOut | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J2 |
| 1 | V/OCT | profane_geometry_jackboard:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J13 |

hearthsinger/profane-geometry
Digitally controlled triangle-core VCO with 4 individual waveshapes, plus one mix output with per-wave attenuation

nanassound/midimesh_esp32
ESP32 midi controller over UDP network. Firmware is using AtomVM.

SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects

jgillick/ThunderPack
A self-contained microcontroller, battery, and power management system that fits in your pocket.

Jeija/esp8266-povslinger
Persistence of vision display using ESP8266 and APA102-2020




tahnok/cuttle2fish
Something you know (password) and something you have (cuttlefish shaped U2F token)
It measures 61 × 111.8 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the APA102-2020 and PTL30-19G1-103B2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hearthsinger/profane-geometry repository on GitHub, at the commit this page was made from: the board is profane_geometry_jackboard/profane_geometry_jackboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hearthsinger before reusing the design.