

Mdrv
Mcu controlled three phase motor driver with PPM input
- Size
- 60 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 100
- Pads
- 439
- Tracks, vias
- 867, 426
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2024
- Updated
- 22 Jan 2026
Overview
Mdrv is an open-source printed circuit board by hanneskiene, from the hanneskiene/mdrv repository on GitHub, published under the MIT licence. It is a 4-layer board of 60 × 50 mm with 112 parts on 100 nets, routed with 867 tracks and 426 vias.
It is built around the NCV51511PD and USBLC6-2SC6. Its parts include 48 capacitors, 36 resistors, 11 ICs, 6 transistors and 4 diodes. It belongs with the robots and motor control and power boards and the STM32 boards of this library.
Main components
2NCV51511PD
VFQFN-24-40℃~+150℃ 1.3V~2V 1.8V~2.5V 170uA 2 3A 4ns 6A 6ns 8V~16V Low Side、High Side MOSFET Under Voltage Protection、Built-in bootstrap diode VFQFN-24 Gate Drivers ROHSonsemiGate DriversUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdmdrv

State
- HW seems to be working, no full load test yet
- FW implementation very limited
Specs
- 48V DC max (80V topside cooled mosfets, 60V DCDC)
- Spi motor angle sensor
- PPM control input
- STM32G474RE MCU
- Three phase inline current sensors
Assembled PCB

Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C12, C16, C19, C23, C27, C28, C29, C38, C40, C41, C43 |
| 12 | 4u7 | Capacitor_SMD:C_1210_3225Metric | C60, C79, C80, C81, C82, C84, C86, C87, C88, C89, C90, C91 |
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R21, R22, R24, R27, R28, R29, R30, R31, R32, R33, TH1 |
| 10 | 2u2 | Capacitor_SMD:C_1206_3216Metric | C1, C6, C8, C9, C11, C15, C17, C18, C22, C26 |
| 7 | 1n | Capacitor_SMD:C_0603_1608Metric | C5, C7, C13, C14, C20, C21, C30 |
| 6 | 1m | Package_TO_SOT_SMD:PQFN_8x8 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | 4R7 | Resistor_SMD:R_0603_1608Metric | R1, R2, R7, R8, R13, R14 |
| 5 | 680R | Resistor_SMD:R_0603_1608Metric | R4, R10, R16, R34, R1001 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R11, R17, R23 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C24, C25, C34, C39 |
| 4 | 3k3 | Resistor_SMD:R_0603_1608Metric | R6, R12, R18, R26 |
| 3 | 1m | footprints:R_Shunt_Vishay_WSLP3921 | R3, R9, R15 |
| 3 | AD8418 | Package_SO:MSOP-8_3x3mm_P0.65mm | U3, U5, U7 |
| 3 | NCV51511 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm_ThermalVias | U2, U4, U6 |
| 2 | 330u | footprints:CP_Radial_D10.0mm_P5.00mm_Flat | C2, C10 |
| 2 | 33u | Inductor_SMD:L_7.3x7.3_H4.5 | L1, L2 |
| 2 | LV2862YDDCR | Package_TO_SOT_SMD:TSOT-23-6 | U8, U11 |
| 2 | NRVB2H100SFT3G | Diode_SMD:D_SMF | D1, D2 |
| 1 | 0R | Resistor_SMD:R_1206_3216Metric | R25 |
| 1 | 147k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J7 |
| 1 | Conn_01x06 | Connector_Molex:Molex_PicoBlade_53261-0671_1x06-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | et-misc:PinHeader_2x05_P1.27mm_Vertical_SMD | J1301 |
| 1 | D_Zener | et-misc:D_SMF | D3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1001 |
| 1 | MCP1825S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | STM32G474RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | USB_B_Micro | et-misc:USB_Micro-B_Wuerth_629105150521_CircularHoles | J6 |
Similar boards
- 4 layers16.9 × 119.4 mm

- 2 layers290.1 × 130 mm

- 4 layers95 × 55.5 mm

EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers299 × 127 mm

- 2 layers42 × 67 mm

- 2 layers134 × 88 mm

Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 4 layers70.8 × 108 mm

- 4 layers28.2 × 26.1 mm

DongleHiderPlus PCB
LeoDJ/FW-EC-DongleHiderPlus
Framework Expansion Card that includes a USB hub to hide a bare dongle inside and still have a USB-A port externally
23 parts497CERN-OHL-W-2.0
Questions
How big is the Mdrv PCB?
It measures 60 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mdrv use?
112 parts, built around the NCV51511PD and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mdrv KiCad files?
From the hanneskiene/mdrv repository on GitHub, at the commit this page was made from: the board is mdrv/mdrv.kicad_pcb and its schematic mdrv/bat_sense.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mdrv design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).