2 layers21 × 35 mm
2 layers17.8 × 37.1 mm
NanoSwinSIDc
hackup/NanoSwinSIDc7Simple AVR-based replacement for the MOS6581 and MOS8580 sound chips aka. the Commodore SID.
- Size
- 17.8 × 37.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 41
- Pads
- 90
- Tracks, vias
- 177, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 May 2019
- Updated
- 12 May 2019
Overview
NanoSwinSIDc is an open-source printed circuit board by hackup, from the hackup/NanoSwinSIDc repository on GitHub. It is a 2-layer board of 17.8 × 37.1 mm with 15 parts on 41 nets, routed with 177 tracks and 17 vias.
It is built around the ATMEGA88PA-AU. Its parts include 6 resistors, 2 ICs, 1 capacitor, 1 diode and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdNanoSwinSIDc
USE AT YOUR OWN RISK!
The SwinSID is a drop-in replacement for the MOS 6581 and MOS 8580 sound chips. It is not fully compatible and it lacks certain features.
The NanoSwinSIDc board layout was created using KiCAD and it is heavily based on the NanoSinSIDb made by Tolaemon.
Revision 1 has been tested and can be confirmed working. Caveat: The Board/Filter labels for JP1/JP2 have accidentally been swapped!
Revision 2 features an optimized layout with standard 100mil connectors. It has not yet been tested.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistors_SMD:R_0805_HandSoldering | R1, R3 |
| 1 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 240k | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 2k2 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 32Mhz | Oscillators:Oscillator_SMD_EuroQuartz_XO53-4pin_5.0x3.2mm_HandSoldering | X1 |
| 1 | 330 | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 6581SEL | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | JP1 |
| 1 | ATMEGA88PA-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U2 |
| 1 | C64-SID-Socket | hackup:Socket-Adapter-DIP28 | U1 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J1 |
| 1 | Jumper | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | JP2 |
| 1 | LED | LEDs:LED_0805_HandSoldering | D1 |
| 1 | LOGO | Logo:bigby2 | G*** |
Questions
How big is the NanoSwinSIDc PCB?
It measures 17.8 × 37.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NanoSwinSIDc use?
15 parts, built around the ATMEGA88PA-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NanoSwinSIDc KiCad files?
From the hackup/NanoSwinSIDc repository on GitHub, at the commit this page was made from: the board is NanoSwinSIDc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NanoSwinSIDc design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackup before reusing the design.
Similar boards
- 2 layers17.5 × 36.6 mm
Swinsid
jsanpe/SwinsidNeat
Yet another PCB layout of the nano SwinSID focusing on aesthetics
13 parts17MIT - 2 layers50 × 50 mm
Nrfburn
nodep/nrfburn
Hardware and software package for flashing Nordic Semiconductors nRF24LE1 and nRF24LU1+ microcontrollers
32 parts9GPL-3.0 - 2 layers66 × 99.1 mm
- 2 layers52.1 × 65.4 mm
Continuity tester
vpatkov/continuity-tester
Ultra low-voltage, low-current, and fast continuity tester
38 parts2 - 2 layers33.1 × 16 mm
- 2 layers58 × 46 mm
- 2 layers31.1 × 33 mm
