

Aircon control rounded
- Size
- 58 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 64
- Pads
- 230
- Tracks, vias
- 391, 85
- Pours
- 227
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Mar 2026
- Updated
- 14 Mar 2026
Overview
Aircon control rounded is an open-source printed circuit board by lbrushmanl, from the lbrushmanl/car-aircon-controller repository on GitHub. It is a 2-layer board of 58 × 46 mm with 75 parts on 64 nets, routed with 391 tracks and 85 vias.
It is built around the ATMEGA88PA-AU, TPS562200DDC and ULN2003A. Its parts include 29 resistors, 21 capacitors, 7 ICs, 6 connectors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA88PA-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 512Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TPS562200DDC
UncategorisedTexas InstrumentsULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
README
README.mdcar-aircon-controller
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C8, C11, C13, C17, C20, C21 |
| 8 | 33 | Resistor_SMD:R_0603_1608Metric | R7, R8, R12, R13, R14, R15, R19, R20 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R24, R25, R28 |
| 4 | 10p | Capacitor_SMD:C_0603_1608Metric | C9, C10, C14, C15 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R27, R29 |
| 2 | 1 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R1, R18 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C16, C18 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | Opamp_Dual | Package_SO:VSSOP-8_3x3mm_P0.65mm | U3, U6 |
| 2 | R | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | Set | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R26 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 33 | Resistor_SMD:R_1206_3216Metric | R23 |
| 1 | 4u7 | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | ATmega88PA-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CAT6219-330 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | Conn_01x02_Pin | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J7 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Interface Conn | Connector_Phoenix_MC:PhoenixContact_MC_1,5_8-G-3.81_1x08_P3.81mm_Horizontal | J6 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92_Wide | U4 |
| 1 | OLED Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | Setpoint Connector | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J1 |
| 1 | TPS562200 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | Uart Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers21 × 35 mm

- 2 layers17.5 × 36.6 mm

Swinsid
jsanpe/SwinsidNeat
Yet another PCB layout of the nano SwinSID focusing on aesthetics
13 parts17MIT - 2 layers50 × 50 mm

Nrfburn
nodep/nrfburn
Hardware and software package for flashing Nordic Semiconductors nRF24LE1 and nRF24LU1+ microcontrollers
32 parts9GPL-3.0 - 2 layers17.8 × 37.1 mm

NanoSwinSIDc
hackup/NanoSwinSIDc
Simple AVR-based replacement for the MOS6581 and MOS8580 sound chips aka. the Commodore SID.
15 parts7 - 2 layers66 × 99.1 mm

- 2 layers52.1 × 65.4 mm

Continuity tester
vpatkov/continuity-tester
Ultra low-voltage, low-current, and fast continuity tester
38 parts2 - 2 layers33.1 × 16 mm

- 2 layers31.1 × 33 mm

Questions
How big is the Aircon control rounded PCB?
It measures 58 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Aircon control rounded use?
75 parts, built around the ATMEGA88PA-AU, TPS562200DDC and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aircon control rounded KiCad files?
From the lbrushmanl/car-aircon-controller repository on GitHub, at the commit this page was made from: the board is hardware/aircon-control/aircon-control-rounded.kicad_pcb and its schematic hardware/aircon-control/aircon-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aircon control rounded design in my own project?
Its repository states no licence, so its author keeps all rights: ask lbrushmanl before reusing the design.