Skip to the content
2 layers41.9 × 35.6 mmArduinoshield ss, the printed circuit board in 3D

Arduino code was developed using plastformio. If you don't know it, I strongly recommend you to give it a try. If you just was to get this running quickly you can copy and paste the contents of main.cpp into the arduino…

Size
41.9 × 35.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
7
Pads
22
Tracks, vias
61, 0
Routed
Yes
KiCad
KiCad 4
Created
31 May 2018
Updated
31 May 2018

Overview

Arduinoshield ss is an open-source printed circuit board by hackerspace-nijmegen, from the hackerspace-nijmegen/donationbox repository on GitHub. It is a 2-layer board of 41.9 × 35.6 mm with 8 parts on 7 nets, routed with 61 tracks and 0 vias.

It is built around the BC337. Its parts include 5 connectors, 2 resistors and 1 transistor. It belongs with the microcontroller boards boards of this library.

Main components

1

README

README.md

donationbox

Arduino code was developed using plastformio. If you don't know it, I strongly recommend you to give it a try. If you just was to get this running quickly you can copy and paste the contents of main.cpp into the arduino ide. It is completely compatible.

Dependencies:

Arduino code depends on the LowPower library

Circuit boards:

There is a double sided (arduinoshield) and a single sided version (arduinoshield-ss) of the same schematic. KiCad did not allow me to share the schematic between two boards so there is some duplication. Neither is actually a shield. It's just a breakout board for a transistor switched led strip and two ir endstops.

Todo's:

  • make a fancy animation (using pwm?) on the led instead of the current dump on/off sequence.

Parts

8
QtyValueFootprintReferences
11kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1470Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1BC337TO_SOT_Packages_THT:TO-92_Inline_WideQ1
1BatPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ4
1LedPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ5
1arduinoPin_Headers:Pin_Header_Straight_1x05_Pitch2.54mmJ1
1opt1Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ3
1opt2Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ2

More from hackerspace-nijmegen/donationbox

1
  • 2 layers41.9 × 35.6 mmArduinoshield, the printed circuit board in 3D

    Arduinoshield

    hackerspace-nijmegen/donationbox

    Arduino code was developed using plastformio. If you don't know it, I strongly recommend you to give it a try. If you just was to get this running quickly you can copy and paste the contents of main.cpp into the arduino…

    12 parts

Similar boards

  • 2 layers50 × 25 mmMbus master, the printed circuit board in 3D

    Mbus master

    roarfred/AmsToMqttBridge

    Minimalistic system to read AMS/HAN data from electrical meter

    50 parts223
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers28.7 × 81.3 mmLine sensor mini wide, the printed circuit board in 3D

    Line sensor mini wide

    ukmars/ukmarsbot

    A simple beginners multi purpose robot platform

    37 parts138MIT
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers56.6 × 57.7 mmTashTwenty Tiny, the printed circuit board in 3D

    TashTwenty Tiny

    lampmerchant/tashtwenty

    An interface for the DCD protocol used by Apple's Hard Disk 20.

    31 parts35GPL-3.0
  • 2 layers52.8 × 149.3 mmPixelSlasher, the printed circuit board in 3D

    PixelSlasher

    CTXz/Video-Glitch-Array

    A collection of glitch art circuits dedicated to VGA signal manipulation

    22 parts30
  • 2 layers37.1 × 24.1 mmZX81-Composite, the printed circuit board in 3D

    ZX81-Composite

    redhawk668/ZX81-Composite

    ZX81 Composite video with Backporch

    16 parts25GPL-3.0

Questions

How big is the Arduinoshield ss PCB?

It measures 41.9 × 35.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduinoshield ss use?

8 parts, built around the BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduinoshield ss KiCad files?

From the hackerspace-nijmegen/donationbox repository on GitHub, at the commit this page was made from: the board is arduinoshield-ss/electronics.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduinoshield ss design in my own project?

Its repository states no licence, so its author keeps all rights: ask hackerspace-nijmegen before reusing the design.