
ILV2-7-5 Clock
biomurph/ILV2-7-5_VFD_Display
KiCAD circuit for a VFD Clock using the Popular ILV2-7/5 flat tube segmented nixie

GROchet PCB is an open-source printed circuit board by GROchet, from the GROchet/GROchet_PCB repository on GitHub. It is a 2-layer board of 100 × 56 mm with 100 parts on 122 nets, routed with 574 tracks and 265 vias.
It is built around the 74LVC1G125, 74LVC1G126Z and TPS40305DRCR, with the 74HC2G14GW, 1N4148W and DOZ20N03 among its other parts. Its parts include 30 resistors, 28 capacitors, 15 connectors, 9 diodes and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5, R7, R9, R11, R12, R15, R17, R21, R23, R24, R26, R28, R30 |
| 11 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R13, R14, R16, R18, R19, R20, R22, R25, R27 |
| 10 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C6, C11, C12, C13, C14, C15, C17, C18, C19 |
| 8 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | Conn_01x04_Pin | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1, J2, J3, J7, J8, J9, J10, J12 |
| 7 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C27, C29, C30 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C23, C24, C25 |
| 3 | 100uF | Capacitor_SMD:C_1206_3216Metric | C9, C10, C16 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J13, J14, J15 |
| 3 | Conn_01x03_Pin | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J5, J6, J11 |
| 3 | ~ | BIGTREETECH:TMC2208 | U1, U2, U3 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C22, C26 |
| 2 | DOZ20N03 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.7x2.4mm_ThermalVias | Q1, Q2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 1.37k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 150pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | 1uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | 2.61k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 255 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 3.3nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 3.9nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 74HC2G14GW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U6 |
| 1 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | 74LVC1G126 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7 |
| 1 | 91pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | Arduino_Mega2560_R3_Shield | arduino-library:Arduino_Mega2560_R3_Shield | A1 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Wuerth_694108106102_2.5x5.5mm | J4 |
| 1 | D | Diode_SMD:D_SOD-123 | D9 |
| 1 | TPS40305DRCR | footprints:DRC10_2P4X1P65 | U4 |

biomurph/ILV2-7-5_VFD_Display
KiCAD circuit for a VFD Clock using the Popular ILV2-7/5 flat tube segmented nixie

aeventre/Self_Balancing_Hexapod_Robot
The goal for the initial configuration of this project was to design a Hexapod Robot capable of performing dynamic movements and maintaining self-balance.

purduerov/X18-ROV-Test-Bench
This will be the place to push all test bench changes.

kim-xps12/m5stack_board_unitree_brushless_digital_servo
Unitree Servo UART Board for M5Stack: auto-direction 4 Mbps half-duplex TTL bus for Unitree J288 / S288 brushless digital servos (KiCad 9, JLCPCB PCBA)




It measures 100 × 56 mm and has 2 copper layers, 1.6 mm thick.
100 parts, built around the 74LVC1G125, 74LVC1G126Z, TPS40305DRCR and 74HC2G14GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GROchet/GROchet_PCB repository on GitHub, at the commit this page was made from: the board is GROchet_PCB.kicad_pcb and its schematic GROchet_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GROchet before reusing the design.