Skip to the content

TPS40305DRCR

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.2MHz 3.5mA 3V~20V Buck Buck External Yes VSON-10-EP(3x3) DC-DC Converters ROHS

Part id
ti/TPS40305DRCR
Category
DC DC Converters
Package
VSON-10-EP(3x3)
Pins
11
In stock
86 at JLCPCB (C140285)
Used on
4 open-source boards

Overview

The TPS40305DRCR is a DC DC Converter made by Texas Instruments in a VSON-10-EP(3x3) package with 11 pins. -40℃~+125℃@(TJ) 1 1.2MHz 3.5mA 3V~20V Buck Buck External Yes VSON-10-EP(3x3) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS40305DRCR, from EasyEDA) and its footprint (EasyEDA_Cloud:VSON-10_L3.0-W3.0-P0.50-BL-EP_TPS62410DRCR, from EasyEDA), ready for a KiCad board. 86 are in stock at JLCPCB (part C140285). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1VDD2ENSS3PGOOD4COMP5FB6BOOT7HDRV8SW9LDRVOC10BP11EP
EasyEDA_Cloud:TPS40305DRCRFrom EasyEDA

Footprint

EasyEDA_Cloud:VSON-10_L3.0-W3.0-P0.50-BL-EP_TPS62410DRCRFrom EasyEDA

From the datasheet

12
Supply, least
3 V · VDD, recommended operating min · p. 4
Supply, most
20 V · VDD, recommended operating max · p. 4
Supply, absolute maximum
22 V · VDD, absolute maximum · p. 4
Junction, hottest
145 °C · Operating junction temperature, absolute max · p. 4
Takes working
2.5 mA · VDD, typical quiescent current, nonswitching, EN/SS floating, VFB = 1 V · p. 5
Takes asleep
70 µA · VDD, typical shutdown current, VEN/SS < 0.2 V · p. 5
Feedback reference
600 mV · FB, typical reference at TJ = 25°C, 3 V < VVDD < 20 V · p. 5
Switches at
1.2 MHz · TPS40305, typical PWM frequency, 3 V < VVDD < 20 V · p. 5
Junction to air (DRC (VSON))
44.3 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to board (DRC (VSON))
19.2 K/W · Junction-to-board thermal resistance · p. 4
Junction to case (DRC (VSON))
56.1 K/W · Junction-to-case (top) thermal resistance · p. 4
Edge
10 ns · Low-side driver fall time, typical, CLOAD = 5 nF · p. 6

What it is and has

10
Controller
3-V to 20-V input, voltage mode, synchronous buck · p. 1
Switching frequency
1.2 MHz · p. 1
Current sensing
High- and low-side FET RDS(on) sensing · p. 1
Soft start
Programmable · p. 1
Reference voltage
600 mV, 1% · p. 1
Feed-forward compensation
Voltage feed-forward · p. 1
Prebiased output
Supported · p. 1
Protection
Thermal shutdown at 145°C · p. 1
Current sensing
High- and low-side FET RDS(on) · p. 1
Overcurrent protection
Programmable, thermally compensated · p. 1

Around it

7
cap 0.1-µF
between BOOT and SW; Typical bootstrap capacitor; must be connected between BOOT and SW. · p. 3
diode schottky diode
between BP and BOOT; Recommended for low input voltage operation to maximize high-side gate drive voltage. · p. 3
cap 1 µF or greater
between BP and GND; Low ESR ceramic bypass capacitor. · p. 3
cap at least 1-µF
between VDD and GND; Low ESR ceramic bypass capacitor close to the device. · p. 3
cap not specified
between EN/SS and GND; Programs soft-start time. · p. 3
res 267-kΩ
between EN/SS and BP; Optional; enables the FSS feature. · p. 3
res not specified
between LDRV/OC and GND; Programs the OCP voltage level during initial calibration. · p. 3

Specifications

67
ParameterConditionsAs printedPage
VDD VDDOver operating free-air temperature rangemin -0.3 · max 22 V4
SW SWOver operating free-air temperature rangemin -3 · max 27 V4
SW (< 100-ns pulse width, 10 uJ) SW< 100-ns pulse width, 10 uJ; value printed in MAX columnmax -5 V4
BOOT BOOTOver operating free-air temperature rangemin -0.3 · max 30 V4
HDRV HDRVOver operating free-air temperature rangemin -5 · max 30 V4
BOOT-SW, HDRV-SW (differential from BOOT or HDRV to SW) BOOT-SW, HDRV-SWDifferential from BOOT or HDRV to SWmin -0.3 · max 7 V4
COMP, PGOOD, FB, BP, LDRV, EN/SSOver operating free-air temperature rangemin -0.3 · max 7 V4
Operating junction temperature, TJ TJmin -40 · max 145 °C4
Storage temperature, Tstg Tstgmin -55 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1500 Vmax 1500 V4
Input voltage VDDmin 3 · max 20 V4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADRC (VSON), 10 PINStyp 44.3 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DRC (VSON), 10 PINStyp 56.1 °C/W4
Junction-to-board thermal resistance RθJBDRC (VSON), 10 PINStyp 19.2 °C/W4
Junction-to-top characterization parameter ψJTDRC (VSON), 10 PINStyp 0.7 °C/W4
Junction-to-board characterization parameter ψJBDRC (VSON), 10 PINStyp 19.4 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)DRC (VSON), 10 PINStyp 5.5 °C/W4
FB input voltage VFBTJ = 25°C, 3 V < VVDD < 20 Vmin 597 · typ 600 · max 603 mV5
FB input voltage VFB–40°C < TJ < 125°C, 3 V < VVDD < 20 Vmin 594 · typ 600 · max 606 mV5
Input supply voltage range VVDDmin 3 · max 20 V5
Shutdown supply current IDDSDVEN/SS < 0.2 Vtyp 70 · max 100 uA5
Quiescent, nonswitching IDDQLet EN/SS float, VFB = 1 Vtyp 2.5 · max 3.5 mA5
High-level input voltage, EN/SS VIHmin 0.55 · typ 0.7 · max 1 V5
Low-level input voltage, EN/SS VILmin 0.27 · typ 0.3 · max 0.33 V5
Soft-start source current ISSmin 8 · typ 10 · max 12 uA5
Soft-start voltage level VSSmin 0.4 · typ 0.8 · max 1.3 V5
Output voltage VBPIBP = 10 mA; BP regulatormin 6.2 · typ 6.5 · max 6.8 V5
Regulator dropout voltage, VVDD – VBP VDOIBP = 25 mA, VVDD = 3 Vtyp 70 · max 110 mV5
PWM frequency fSWTPS40305; 3 V < VVDD < 20 Vmin 1.02 · typ 1.2 · max 1.38 MHz5
Frequency spread-spectrum frequency deviation fSWFSSmin 12 fSW5
Modulation frequency fMODtyp 25 kHz5
Maximum duty cycle DMAXTPS40305; VFB = 0 V, 3 V < VVDD < 20 V; ensured by design, not production testedmin 85 %5
Minimum controllable pulse width tON(min)Ensured by design, not production testedmax 70 ns5
Output driver dead time tDEADHDRV off to LDRV onmin 5 · typ 25 · max 35 ns5
Output driver dead time tDEADLDRV off to HDRV onmin 5 · typ 25 · max 30 ns5
Gain bandwidth product GBWPEnsured by design, not production testedmin 10 · typ 24 MHz5
Open loop gain AOLEnsured by design, not production testedmin 60 dB5
Input bias current (current out of FB pin) IIBVFB = 0.6 Vmax 75 nA5
Output source current IEAOPVFB = 0 Vmin 2 mA5
Output sink current IEAOMVFB = 1 Vmin 2 mA5
Feedback upper voltage limit for PGOOD VOVmin 655 · typ 675 · max 700 mV5
Feedback lower voltage limit for PGOOD VUVmin 500 · typ 525 · max 550 mV5
PGOOD hysteresis voltage at FB VPGD-HYSTtyp 25 · max 40 mV5
PGOOD pulldown resistance RPGDVFB = 0 V, IFB = 5 mAtyp 30 · max 70 Ω5
PGOOD leakage current IPGDLK550 mV < VFB < 655 mV, VPGOOD = 5 Vtyp 10 · max 20 uA5
High-side driver pullup resistance RHDHIVBOOT – VSW = 5 V, IHDRV = –100 mAmin 0.8 · typ 1.5 · max 2.5 Ω6
High-side driver pulldown resistance RHDLOVBOOT – VSW = 5 V, IHDRV = 100 mAmin 0.5 · typ 1 · max 2.2 Ω6
Low-side driver pullup resistance RLDHIILDRV = –100 mAmin 0.8 · typ 1.5 · max 2.5 Ω6
Low-side driver pulldown resistance RLDLOILDRV = 100 mAmin 0.35 · typ 0.6 · max 1.2 Ω6
High-side driver rise time tHRISECLOAD = 5 nF; ensured by design, not production testedtyp 15 ns6
High-side driver fall time tHFALLCLOAD = 5 nF; ensured by design, not production testedtyp 12 ns6
Low-side driver rise time tLRISECLOAD = 5 nF; ensured by design, not production testedtyp 15 ns6
Low-side driver fall time tLFALLCLOAD = 5 nF; ensured by design, not production testedtyp 10 ns6
Minimum pulse time during short circuit tPSSC(min)Ensured by design, not production testedtyp 250 ns6
Switch leading-edge blanking pulse time tBLNKHEnsured by design, not production testedtyp 150 ns6
OC threshold for high-side FET VOCHTJ = 25°Cmin 360 · typ 450 · max 580 mV6
OCSET current source IOCSETTJ = 25°Cmin 9.5 · typ 10 · max 10.5 uA6
Maximum clamp voltage at LDRV VLD-CLAMPmin 260 · typ 340 · max 400 mV6
OC comparator offset voltage for low-side FET VOCLOSTJ = 25°Cmin -8 · max 8 mV6
Programmable OC range for low-side FET VOCLPROTJ = 25°C; ensured by design, not production testedmin 12 · max 300 mV6
OC threshold temperature coefficient (both high-side and low-side) VTHTCEnsured by design, not production testedtyp 3000 ppm6
OC retry cycles on EN/SS pin tOFFtyp 4 Cycle6
Bootstrap diode forward voltage VDFWDIBOOT = 5 mAtyp 0.8 V6
Junction shutdown temperature TJSDEnsured by design, not production testedtyp 145 °C6
Hysteresis TJSDHThermal shutdown; ensured by design, not production testedtyp 20 °C6

Pins, by the datasheet

11
1 VDD
Controller power input; bypass to GND with at least 1-uF low ESR ceramic capacitance close to the device. · p. 3
2 EN/SS
Enable and soft-start programming input; floating enables, low disables; a capacitor to GND sets soft-start time and an optional 267-kΩ resistor to BP enables FSS. · p. 3
3 PGOOD
Open-drain power good output. · p. 3
4 COMP
Error amplifier output and connection node for loop feedback components. · p. 3
5 FB
Inverting error amplifier input; equals the internal reference voltage in normal operation. · p. 3
6 BOOT
High-side MOSFET gate drive supply; connect a typical 0.1-uF capacitor to SW; an external Schottky diode from BP is recommended for low input voltage operation. · p. 3
7 HDRV
Bootstrapped gate drive output for the high-side N-channel MOSFET. · p. 3
8 SW
Adaptive anti-cross conduction sense line and common connection for the flying high-side FET driver. · p. 3
9 LDRV/OC
Low-side N-channel MOSFET gate drive output; a resistor to GND sets the OCP voltage during initial calibration. · p. 3
10 BP
Internal regulator output bypass; connect a low ESR ceramic capacitor of at least 1 uF to GND. · p. 3
Thermal Pad GND
Electrical ground and thermal connection; tie externally to a ground plane. · p. 3

Ordering codes, by the datasheet

4
TPS40305DRCR
VSON (DRC), 10 pins · 3000, LARGE T&R; NIPDAU or NIPDAUAG lead finish; operating temperature -40 to 125 °C · p. 34
TPS40305DRCR.A
VSON (DRC), 10 pins · 3000, LARGE T&R; NIPDAU lead finish; operating temperature -40 to 125 °C · p. 34
TPS40305DRCT
VSON (DRC), 10 pins · 250, SMALL T&R; NIPDAU or NIPDAUAG lead finish; operating temperature -40 to 125 °C · p. 34
TPS40305DRCT.A
VSON (DRC), 10 pins · 250, SMALL T&R; NIPDAU lead finish; operating temperature -40 to 125 °C · p. 34

Open-source boards using it

4
  • 2 layers70 × 80 mmSpiderbot, the printed circuit board in 3D

    Spiderbot

    aeventre/Self_Balancing_Hexapod_Robot

    The goal for the initial configuration of this project was to design a Hexapod Robot capable of performing dynamic movements and maintaining self-balance.

    136 parts2Apache-2.0
  • 2 layers100 × 56 mmGROchet PCB, the printed circuit board in 3D

    GROchet PCB

    GROchet/GROchet_PCB

    100 parts
  • 4 layers143.6 × 215.8 mmMcu and pi board, the printed circuit board in 3D

    Mcu and pi board

    purduerov/X18-ROV-Test-Bench

    This will be the place to push all test bench changes.

    118 parts
  • 4 layers325 × 233.5 mmMcu and pi board, the printed circuit board in 3D

    Mcu and pi board

    purduerov/X18-ROV-Test-Bench

    This will be the place to push all test bench changes.

    101 parts

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the TPS40305DRCR?

Yes. The symbol is EasyEDA_Cloud:TPS40305DRCR and the footprint EasyEDA_Cloud:VSON-10_L3.0-W3.0-P0.50-BL-EP_TPS62410DRCR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS40305DRCR?

VSON-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.

Where is the TPS40305DRCR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS40305DRCR?

JLCPCB lists it as part C140285, with 86 in stock; the sellers' links on this page open their listings.

What can replace the TPS40305DRCR?

Parts like it in the library: the TPS51312DRC by Texas Instruments, the TPS61081DRC by Texas Instruments, the TPS61025DRC by Texas Instruments and the TPS61029DRC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS40305DRCR?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.