

MuReSC GaN v1
- Size
- 96.7 × 40 mm
- Copper layers
- 4
- Thickness
- 2.58 mm
- Parts
- 123
- Nets
- 103
- Pads
- 435
- Tracks, vias
- 968, 476
- Pours
- 75
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Oct 2023
- Updated
- 28 Apr 2025
Overview
MuReSC GaN v1 is an open-source printed circuit board by gremirarunico, from the gremirarunico/PCBs repository on GitHub. It is a 4-layer board of 96.7 × 40 mm with 123 parts on 103 nets, routed with 968 tracks and 476 vias.
It is built around the STM32G474RET6, LMG1020YFFR and UCC12040DVE, with the TPSM5601R5HRDAR, ISO7720FQDQ1 and MCS0402MC1008FE000 among its other parts. Its parts include 14 ICs, 7 connectors, 4 transistors, 3 capacitors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
12STM32G474RET6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 512KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LMG1020YFFR
BGA-6-55℃~+125℃ 1 1.1V~1.8V 1.7V~2.6V 3ns 3ns 4.5V~5.5V 400ps 500ps 56uA 5A 7A Enable shutdown Low Side MOSFET BGA-6 Gate Drivers ROHSTokmasGate DriversUCC12040DVE
SOIC-16-300mil-40℃~+125℃ 3.3V、5V 3kV 5V SOIC-16-300mil Isolated DC/DC Converters ROHSTexas InstrumentsIsolated DC/DC ConvertersTPSM5601R5HRDAR
QFN-15(5x5.5)-40℃~+125℃@(TJ) 1 1.5A 1V~16V 26uA 4.2V~60V 850kHz~1.15MHz Adjustable Buck Built-in Overcurrent Protection、Operating status indication、Cycle-by-cycle current limiting、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes QFN-15(5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersISO7720FQDQ1
SOIC-8-40℃~+125℃ 0 100Mbps 100kV/us 2 2 2.25V~5.5V 2.25V~5.5V 3000 Fail-safe output Low Level SOIC-8 Digital Isolators ROHSTexas InstrumentsDigital IsolatorsMCS0402MC1008FE000
0402-55℃~+175℃ 100mW 1Ω Thin Film Resistor ±1% ±50ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountGRJ31CZ72A475KE01L
1206100V 4.7uF X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTGS61004B-TR
SMD-3P,4.6x4.4mmSMD-3P,4.6x4.4mm GaN Transistors(GaN HEMT) ROHSInfineon TechnologiesGaN Transistors(GaN HEMT)NFM15PC104R1A3D
SMD-3P,1x0.5mm-55℃~+105℃ 100nF 10V 2A 30mΩ ±20% SMD-3P,1x0.5mm Feed Through Capacitors ROHSMurataFeed Through CapacitorsRT0603DRE10100KL
0603-55℃~+155℃ 100kΩ 100mW Thin Film Resistor ±0.5% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountTSZU52C3V3 RGG
0603-55℃~+125℃ 1 Independent 150mW 25uA@1V 3.14V~3.47V 3.3V 95Ω 0603 Zener Diodes ROHSTaiwan SemiconductorZener DiodesC1210C107M8PACTU
1210100uF 10V X5R ±20% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdPCBs
Informazioni
Repository privato per backup & share di PCB realizzati con KiCAD
KiCad version
7.0.8
License
Very easy to understand: All the Hardware in this repository is under CERN-OHL-S v2 All the Software is under GPLv3 All the documentation is under CC-BY-SA 4.0
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | C0402C104K8RACTU | SamacSys_Parts:CAPC1005X55N | CISOP1, CISOP2, CISOP3, CISOP4, CISOS1, CISOS2, CISOS3, CISOS4, CM1, CM2, CM3, CM4, CM6, CM7, CM9, CM10 +8 |
| 8 | C0603C106M8PAC7411 | SamacSys_Parts:C0603 | CTPB1, CTPB2, CTPB3, CTPB4, CTSB1, CTSB2, CTSB3, CTSB4 |
| 8 | MCS0402MC1008FE000 | SamacSys_Parts:RESC1005X37N | RH1, RH2, RH3, RH4, RL1, RL2, RL3, RL4 |
| 7 | GRT155R70J105KE01D | SamacSys_Parts:CAPC1005X55N | CD1, CD2, CD3, CD4, CLD2, CM5, CM8 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TPC1, TPG1, TPG2, TPG3, TPG4, TPS1, TPS3 |
| 4 | GRJ31CZ72A475KE01L | SamacSys_Parts:CAPC3216X190N | CIN1, CIN2, CPIN1, CPIN2 |
| 4 | GS61004B-TR | SamacSys_Parts:GS61004BTR | Q1, Q2, Q3, Q4 |
| 4 | ISO7720FQDQ1 | SamacSys_Parts:SOIC127P600X175-8N | IC3, IC4, IC5, IC6 |
| 4 | LMG1020YFFR | SamacSys_Parts:BGA6C40P2X3_86X126X62 | IC11, IC12, IC13, IC14 |
| 4 | NFM15PC104R1A3D | SamacSys_Parts:NFM15CC222D1A3D | CFT1, CFT2, CFT3, CFT4 |
| 4 | UCC12040DVE | SamacSys_Parts:SOIC127P1030X265-16N | IC7, IC8, IC9, IC10 |
| 3 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J4, J5 |
| 3 | RT0603DRE10100KL | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RS1, RS4, RS8 |
| 3 | TSZU52C3V3_RGG | SamacSys_Parts:TSZU52C3V3RGG | Z1, Z2, Z3 |
| 2 | 691214110002 | SamacSys_Parts:691214110002 | P1, P2 |
| 2 | BLM15AG601SZ1D | SamacSys_Parts:NFZ15SG152SN10B | BEAD1, BEAD2 |
| 2 | C1210C107M8PACTU | SamacSys_Parts:C1210 | CCV1, CCV2 |
| 2 | ESDALC6V1-1U2 | SamacSys_Parts:ESDALC6V11U2 | D1, D2 |
| 2 | GJM0335C1E6R8DB01D | SamacSys_Parts:CAPC0603X33N | COH1, COH2 |
| 2 | GRM0335C1E5R1BA01D | SamacSys_Parts:CAPC0603X33N | COL1, COL2 |
| 2 | MCS04020D1002BE000 | SamacSys_Parts:RESC1005X37N | RF1, RM1 |
| 2 | PTS526_SK15_SMTR2_LFS | SamacSys_Parts:PTS526SK15SMTR2LFS | S1, S2 |
| 2 | RT0603DRE077K41L | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RS2, RS3 |
| 1 | 2222SQ-221GEC | SamacSys_Parts:2222SQ221GEC | L1 |
| 1 | C1206C821J1GACTU | SamacSys_Parts:C1206 | C2 |
| 1 | C1812C105K1RACTU | SamacSys_Parts:C1812 | C3 |
| 1 | C1812C124J1GACTU | SamacSys_Parts:C1812 | C1 |
| 1 | Conn_01x02 | SamacSys_Parts:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x05 | SamacSys_Parts:PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | GRM155R61A475MEAAD | SamacSys_Parts:CAPC1005X55N | CM0 |
| 1 | GRM155Z71A105KE01J | SamacSys_Parts:CAPC1005X55N | CLD1 |
| 1 | Jumper_2_Bridged | SamacSys_Parts:PinHeader_1x02_P2.54mm_Horizontal | JP1 |
| 1 | LD39050PU33R | SamacSys_Parts:SON95P300X300X100-7N-D | PS1 |
| 1 | MCS04020C1003FE000 | SamacSys_Parts:RESC1005X37N | RUB2 |
| 1 | MCS04020C3300FE000 | SamacSys_Parts:RESC1005X37N | RUB1 |
| 1 | MCS04020D2491BE000 | SamacSys_Parts:RESC1005X37N | RF2 |
| 1 | NX3215SA-32.768K-STD-MUS-2 | SamacSys_Parts:NX3215SA32768KSTDMUS2 | Y1 |
| 1 | NX3225SA-24.000MHZ-STD-CSR-1 | SamacSys_Parts:NX3225SA24000MHZSTDCSR1 | Y2 |
| 1 | RP0603BRD075K76L | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RS7 |
| 1 | STM32G474RET6 | SamacSys_Parts:QFP50P1200X1200X160-64N | IC1 |
| 1 | TPSM5601R5HRDAR | SamacSys_Parts:TPSM5601R5HRDAR | IC2 |
More from gremirarunico/PCBs
1- 4 layers70.5 × 66.3 mm

Similar boards
- 4 layers49 × 80 mm

70MHz Soil Sensor
jhns-de/70MHz-Soil-Sensor
Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.
130 parts2 - 2 layers75 × 50 mm

Wireless adapter for mitsubishi
pebender/wireless_adapter_for_mitsubishi
This project is neither associated with nor endorsed by Mitsubishi Electric. By using this project, you may void your warranty or break your heat pump.
53 partsMIT - 4 layers120 × 72 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
21 parts - 4 layers103.6 × 114 mm

- 6 layers69.7 × 76.7 mm

Amulet controller
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
414 parts348Apache-2.0 - 4 layers50 × 60 mm

- 6 layers69.7 × 76.7 mm

Amulet controller
aidanbrzezinski/Prism-test
ΛMULET is a high-power brushless motor controller, compatible with the moteus firmware. It was specifically designed to be integrated in EPFL Xplore's Legged Robot actuators.
414 parts - 2 layers58.5 × 67.9 mm

PowerAnalyzer ACS71020 V2
Vrail99/PowerAnalyzer
Project for the Power Analyzer based on a COTS Power Monitoring IC
41 parts3
Questions
How big is the MuReSC GaN v1 PCB?
It measures 96.7 × 40 mm and has 4 copper layers, 2.58 mm thick.
What parts does the MuReSC GaN v1 use?
123 parts, built around the STM32G474RET6, LMG1020YFFR, UCC12040DVE and TPSM5601R5HRDAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MuReSC GaN v1 KiCad files?
From the gremirarunico/PCBs repository on GitHub, at the commit this page was made from: the board is MuReSC_GaN_v1/Project.kicad_pcb and its schematic MuReSC_BCD_v1/MuReSC_BCD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MuReSC GaN v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask gremirarunico before reusing the design.