Skip to the content

STM32G474RET6

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 512KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32G474RET6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
125 at JLCPCB (C521608)
Used on
33 open-source boards

Overview

The STM32G474RET6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 512KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G474RETx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 125 are in stock at JLCPCB (part C521608). 33 open-source boards in 27 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PF06PF17PG108PC09PC110PC211PC312PA013PA114PA215VSS16VDD17PA318PA419PA520PA621PA722PC423PC524PB025PB126PB227VSSA28VREF+29VDDA30PB1032VDD33PB1134PB1235PB1336PB1437PB1538PC639PC740PC841PC942PA843PA944PA1045PA1146PA1248VDD49PA1350PA1451PA1552PC1053PC1154PC1255PD256PB357PB458PB559PB660PB761PB862PB964VDD
MCU_ST_STM32G4:STM32G474RETxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

19
Supply, least
1.71 V · VDD, recommended operating min · p. 85
Supply, most
3.6 V · VDD, recommended operating max · p. 85
Supply, least
1.62 V · VDDA, ADC used, recommended operating min · p. 85
Supply, least
1.8 V · VDDA, COMP used, recommended operating min · p. 85
Supply, least
2.4 V · VDDA, VREFBUF used, recommended operating min · p. 85
Supply, least
1.55 V · VBAT, recommended operating min · p. 85
Supply, absolute maximum
4 V · VDD, VDDA, VBAT and VREF+, absolute max · p. 83
Works from
-40 °C · Ambient, suffix 6, min · p. 85
Works up to
85 °C · Ambient, suffix 6, maximum power dissipation, max · p. 85
Works up to
105 °C · Ambient, suffix 6, low-power dissipation, max · p. 85
Junction, hottest
150 °C · Junction temperature, absolute max · p. 84
Junction, hottest
105 °C · Junction temperature, suffix 6 operating max · p. 85
Takes working
29.5 mA · Run, 170 MHz, Flash single bank, peripherals disabled, 25°C, typical · p. 91
Takes at most
36 mA · Run, 170 MHz, Flash single bank, peripherals disabled, 105°C, max · p. 91
Takes asleep
130 nA · Standby, RTC disabled, no independent watchdog, 3 V, 25°C, typical · p. 105
Takes asleep
43 nA · Shutdown, RTC disabled, 3 V, 25°C, typical · p. 107
A pin gives at most
20 mA · I/O source current, absolute max · p. 84
Junction to air (LQFP64 - 10 × 10 mm)
47.9 K/W · Junction-to-ambient thermal resistance · p. 230
Junction to air (LQFP64)
47.9 K/W · junction-to-ambient thermal resistance · p. 230

What it is and has

25
Core
Arm 32-bit Cortex-M4 CPU with FPU · p. 1
CPU performance
170 MHz / 213 DMIPS · p. 1
Flash memory
512 Kbytes with ECC · p. 1
SRAM
128 KB total · p. 1
SRAM
96 Kbytes; hardware parity on first 32 Kbytes · p. 1
CCM SRAM
32 Kbytes · p. 1
CORDIC
Trigonometric functions acceleration · p. 1
FMAC
Filter mathematical accelerator · p. 1
ADC
5 × 12-bit, 0.25 µs; family offers up to 42 channels · p. 1
DAC
7 × 12-bit channels · p. 1
DAC external channels
3 buffered, 1 MSPS · p. 1
DAC internal channels
4 unbuffered, 15 MSPS · p. 1
Comparators
7 ultra-fast rail-to-rail · p. 1
Operational amplifiers
6, usable in PGA mode · p. 1
Timers
17 · p. 1
Quad-SPI
Memory interface · p. 1
Low-power modes
Sleep, stop, standby and shutdown · p. 1
Package
LQFP64, 10 × 10 mm · p. 1
Maximum clock frequency
170 MHz · p. 1
CPU capabilities
213 DMIPS, MPU, DSP instructions · p. 1
SRAM
128 KB · p. 1
High-resolution timer
184 ps, 12 channels · p. 1
Mathematical hardware accelerator
CORDIC for trigonometric functions · p. 1
Package
LQFP64 (10 x 10 mm) · p. 1
USB
USB-IF certified for Full-speed device operation · p. 181

Around it

5
cap 100 nF
between VDD and VSS; One ceramic capacitor per supply pair; place close to or below the pins. · p. 82
cap 4.7 μF
between VDD and VSS; One additional ceramic capacitor; place close to the supply pins. · p. 82
cap 10 nF
between VDDA and VSSA; Ceramic decoupling; place close to or below the pins. · p. 82
cap 1 μF
between VDDA and VSSA; Additional ceramic decoupling; place close to or below the pins. · p. 82
cap 100 nF +1 μF
between VREF+ and VSSA; Ceramic reference decoupling; VREF- is double bonded with VSSA. Place close to the pins. · p. 82

Specifications

504
ParameterConditionsAs printedPage
External main supply voltage (including VDD, VDDA, VBAT and VREF+) VDD - VSSmin -0.3 · max 4 V83
Input voltage on FT_c pins VINMinimum VSS-0.3max 5.5 V83
Input voltage on TT_xx pins VINMinimum VSS-0.3max 4 V83
Input voltage on any other pins VINMinimum VSS-0.3max 4 V83
Variations between different VDDX power pins of the same domain |∆VDDx|max 50 mV83
Variations between all the different ground pins |VSSx-VSS|Includes VREF- pinmax 50 mV83
Allowed voltage difference for VREF+ > VDDA VREF+-VDDAmax 0.4 V83
Total current into sum of all VDD power lines (source) ∑IVDDmax 150 mA84
Total current out of sum of all VSS ground lines (sink) ∑IVSSmax 150 mA84
Maximum current into each VDD power pin (source) IVDD(PIN)max 100 mA84
Maximum current out of each VSS ground pin (sink) IVSS(PIN)max 100 mA84
Output current sunk by any I/O and control pin except FT_f IIO(PIN)max 20 mA84
Output current sunk by any FT_f pin IIO(PIN)max 20 mA84
Output current sourced by any I/O and control pin IIO(PIN)max 20 mA84
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA84
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA84
Storage temperature range TSTGmin -65 · max 150 °C84
Maximum junction temperature TJmax 150 °C84
Internal AHB clock frequency fHCLKmin 0 · max 170 MHz85
Internal APB1 clock frequency fPCLK1min 0 · max 170 MHz85
Internal APB2 clock frequency fPCLK2min 0 · max 170 MHz85
Standard operating voltage VDDmin 1.71 · max 3.6 V85
Analog supply voltage VDDAADCmin 1.62 V85
Analog supply voltage VDDADAC 1 MSPS or DAC 15 MSPS or OPAMP; minimum 1.8 V appears on the following linemax 3.6 V85
Analog supply voltage VDDADAC 1 MSPS or DAC 15 MSPS or OPAMPmin 1.8 V85
Analog supply voltage VDDACOMP usedmin 1.8 · max 3.6 V85
Analog supply voltage VDDAVREFBUF usedmin 2.4 V85
Backup operating voltage VBATmin 1.55 · max 3.6 V85
I/O input voltage VINTT_xx; maximum VDD+0.3min -0.3 V85
I/O input voltage VINFT_cmin -0.3 · max 5 V85
I/O input voltage VINAll I/O except TT_xx and FT_c; maximum MIN(MIN(VDD, VDDA)+3.6 V, 5.5 V)min -0.3 V85
Ambient temperature for the suffix 6 version TAMaximum power dissipationmin -40 · max 85 °C85
Ambient temperature for the suffix 6 version TALow-power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C85
Junction temperature range TJSuffix 6 versionmin -40 · max 105 °C85
Supply current in Run mode IDD (Run)Range 2, 26 MHz, 25°C; HSE bypass, peripherals disabledtyp 3.65 · max 4 mA91
Supply current in Run mode IDD (Run)Range 2, 26 MHz, 55°C; HSE bypass, peripherals disabledtyp 3.85 · max 4.5 mA91
Supply current in Run mode IDD (Run)Range 2, 26 MHz, 85°C; HSE bypass, peripherals disabledtyp 4.45 · max 6.5 mA91
Supply current in Run mode IDD (Run)Range 2, 26 MHz, 105°C; HSE bypass, peripherals disabledtyp 5.1 · max 8.4 mA91
Supply current in Run mode IDD (Run)Range 2, 16 MHz, 25°C; HSE bypass, peripherals disabledtyp 2.3 · max 2.6 mA91
Supply current in Run mode IDD (Run)Range 2, 16 MHz, 55°C; HSE bypass, peripherals disabledtyp 2.55 · max 3.2 mA91
Supply current in Run mode IDD (Run)Range 2, 16 MHz, 85°C; HSE bypass, peripherals disabledtyp 3.1 · max 5.2 mA91
Supply current in Run mode IDD (Run)Range 2, 16 MHz, 105°C; HSE bypass, peripherals disabledtyp 3.8 · max 7.1 mA91
Supply current in Run mode IDD (Run)Range 2, 8 MHz, 25°C; HSE bypass, peripherals disabledtyp 1.25 · max 1.6 mA91
Supply current in Run mode IDD (Run)Range 2, 8 MHz, 55°C; HSE bypass, peripherals disabledtyp 1.5 · max 2.1 mA91
Supply current in Run mode IDD (Run)Range 2, 8 MHz, 85°C; HSE bypass, peripherals disabledtyp 2.05 · max 4.1 mA91
Supply current in Run mode IDD (Run)Range 2, 8 MHz, 105°C; HSE bypass, peripherals disabledtyp 2.8 · max 6 mA91
Supply current in Run mode IDD (Run)Range 2, 4 MHz, 25°C; HSE bypass, peripherals disabledtyp 0.75 · max 0.94 mA91
Supply current in Run mode IDD (Run)Range 2, 4 MHz, 55°C; HSE bypass, peripherals disabledtyp 0.955 · max 1.5 mA91
Supply current in Run mode IDD (Run)Range 2, 4 MHz, 85°C; HSE bypass, peripherals disabledtyp 1.5 · max 3.5 mA91
Supply current in Run mode IDD (Run)Range 2, 4 MHz, 105°C; HSE bypass, peripherals disabledtyp 2.3 · max 5.4 mA91
Supply current in Run mode IDD (Run)Range 2, 2 MHz, 25°C; HSE bypass, peripherals disabledtyp 0.47 · max 0.65 mA91
Supply current in Run mode IDD (Run)Range 2, 2 MHz, 55°C; HSE bypass, peripherals disabledtyp 0.69 · max 1.3 mA91
Supply current in Run mode IDD (Run)Range 2, 2 MHz, 85°C; HSE bypass, peripherals disabledtyp 1.25 · max 3.2 mA91
Supply current in Run mode IDD (Run)Range 2, 2 MHz, 105°C; HSE bypass, peripherals disabledtyp 2 · max 5.1 mA91
Supply current in Run mode IDD (Run)Range 2, 1 MHz, 25°C; HSE bypass, peripherals disabledtyp 0.34 · max 0.51 mA91
Supply current in Run mode IDD (Run)Range 2, 1 MHz, 55°C; HSE bypass, peripherals disabledtyp 0.55 · max 1.1 mA91
Supply current in Run mode IDD (Run)Range 2, 1 MHz, 85°C; HSE bypass, peripherals disabledtyp 1.1 · max 3 mA91
Supply current in Run mode IDD (Run)Range 2, 1 MHz, 105°C; HSE bypass, peripherals disabledtyp 1.9 · max 5 mA91
Supply current in Run mode IDD (Run)Range 2, 100 KHz, 25°C; HSE bypass, peripherals disabledtyp 0.22 · max 0.38 mA91
Supply current in Run mode IDD (Run)Range 2, 100 KHz, 55°C; HSE bypass, peripherals disabledtyp 0.43 · max 0.94 mA91
Supply current in Run mode IDD (Run)Range 2, 100 KHz, 85°C; HSE bypass, peripherals disabledtyp 0.98 · max 2.9 mA91
Supply current in Run mode IDD (Run)Range 2, 100 KHz, 105°C; HSE bypass, peripherals disabledtyp 1.75 · max 4.8 mA91
Supply current in Run mode IDD (Run)Range 1 Boost mode, 170 MHz, 25°C; PLL ON, peripherals disabledtyp 29.5 · max 30 mA91
Supply current in Run mode IDD (Run)Range 1 Boost mode, 170 MHz, 55°C; PLL ON, peripherals disabledtyp 29.5 · max 30 mA91
Supply current in Run mode IDD (Run)Range 1 Boost mode, 170 MHz, 85°C; PLL ON, peripherals disabledtyp 31 · max 34 mA91
Supply current in Run mode IDD (Run)Range 1 Boost mode, 170 MHz, 105°C; PLL ON, peripherals disabledtyp 32 · max 36 mA91
Supply current in Run mode IDD (Run)Range 1, 150 MHz, 25°C; PLL ON, peripherals disabledtyp 24.5 · max 25 mA91
Supply current in Run mode IDD (Run)Range 1, 150 MHz, 55°C; PLL ON, peripherals disabledtyp 26 · max 27 mA91
Supply current in Run mode IDD (Run)Range 1, 150 MHz, 85°C; PLL ON, peripherals disabledtyp 27 · max 29 mA91
Supply current in Run mode IDD (Run)Range 1, 150 MHz, 105°C; PLL ON, peripherals disabledtyp 28 · max 32 mA91
Supply current in Run mode IDD (Run)Range 1, 120 MHz, 25°C; PLL ON, peripherals disabledtyp 19.5 · max 20 mA91
Supply current in Run mode IDD (Run)Range 1, 120 MHz, 55°C; PLL ON, peripherals disabledtyp 20 · max 21 mA91
Supply current in Run mode IDD (Run)Range 1, 120 MHz, 85°C; PLL ON, peripherals disabledtyp 20.5 · max 23 mA91
Supply current in Run mode IDD (Run)Range 1, 120 MHz, 105°C; PLL ON, peripherals disabledtyp 21.5 · max 25 mA91
Supply current in Run mode IDD (Run)Range 1, 80 MHz, 25°C; PLL ON, peripherals disabledtyp 13 · max 14 mA91
Supply current in Run mode IDD (Run)Range 1, 80 MHz, 55°C; PLL ON, peripherals disabledtyp 13.5 · max 14 mA91
Supply current in Run mode IDD (Run)Range 1, 80 MHz, 85°C; PLL ON, peripherals disabledtyp 14 · max 16 mA91
Supply current in Run mode IDD (Run)Range 1, 80 MHz, 105°C; PLL ON, peripherals disabledtyp 15.5 · max 19 mA91
Supply current in Run mode IDD (Run)Range 1, 72 MHz, 25°C; PLL ON, peripherals disabledtyp 12 · max 13 mA91
Supply current in Run mode IDD (Run)Range 1, 72 MHz, 55°C; PLL ON, peripherals disabledtyp 12 · max 13 mA91
Supply current in Run mode IDD (Run)Range 1, 72 MHz, 85°C; PLL ON, peripherals disabledtyp 13 · max 16 mA91
Supply current in Run mode IDD (Run)Range 1, 72 MHz, 105°C; PLL ON, peripherals disabledtyp 14 · max 18 mA91
Supply current in Run mode IDD (Run)Range 1, 64 MHz, 25°C; PLL ON, peripherals disabledtyp 10.5 · max 11 mA91
Supply current in Run mode IDD (Run)Range 1, 64 MHz, 55°C; PLL ON, peripherals disabledtyp 11 · max 12 mA91
Supply current in Run mode IDD (Run)Range 1, 64 MHz, 85°C; PLL ON, peripherals disabledtyp 11.5 · max 14 mA91
Supply current in Run mode IDD (Run)Range 1, 64 MHz, 105°C; PLL ON, peripherals disabledtyp 12.5 · max 16 mA91
Supply current in Run mode IDD (Run)Range 1, 48 MHz, 25°C; HSE bypass, peripherals disabledtyp 7.9 · max 8.4 mA91
Supply current in Run mode IDD (Run)Range 1, 48 MHz, 55°C; HSE bypass, peripherals disabledtyp 8.2 · max 9 mA91
Supply current in Run mode IDD (Run)Range 1, 48 MHz, 85°C; HSE bypass, peripherals disabledtyp 9 · max 12 mA91
Supply current in Run mode IDD (Run)Range 1, 48 MHz, 105°C; HSE bypass, peripherals disabledtyp 9.7 · max 14 mA91
Supply current in Run mode IDD (Run)Range 1, 32 MHz, 25°C; HSE bypass, peripherals disabledtyp 5.4 · max 5.8 mA91
Supply current in Run mode IDD (Run)Range 1, 32 MHz, 55°C; HSE bypass, peripherals disabledtyp 5.65 · max 6.5 mA91
Supply current in Run mode IDD (Run)Range 1, 32 MHz, 85°C; HSE bypass, peripherals disabledtyp 6.4 · max 9 mA91
Supply current in Run mode IDD (Run)Range 1, 32 MHz, 105°C; HSE bypass, peripherals disabledtyp 7.2 · max 12 mA91
Supply current in Run mode IDD (Run)Range 1, 24 MHz, 25°C; HSE bypass, peripherals disabledtyp 4.1 · max 4.5 mA91
Supply current in Run mode IDD (Run)Range 1, 24 MHz, 55°C; HSE bypass, peripherals disabledtyp 4.35 · max 5.2 mA91
Supply current in Run mode IDD (Run)Range 1, 24 MHz, 85°C; HSE bypass, peripherals disabledtyp 5.1 · max 7.8 mA91
Supply current in Run mode IDD (Run)Range 1, 24 MHz, 105°C; HSE bypass, peripherals disabledtyp 5.95 · max 11 mA91
Supply current in Run mode IDD (Run)Range 1, 16 MHz, 25°C; HSE bypass, peripherals disabledtyp 2.8 · max 3.2 mA91
Supply current in Run mode IDD (Run)Range 1, 16 MHz, 55°C; HSE bypass, peripherals disabledtyp 3.1 · max 3.9 mA91
Supply current in Run mode IDD (Run)Range 1, 16 MHz, 85°C; HSE bypass, peripherals disabledtyp 3.8 · max 6.5 mA91
Supply current in Run mode IDD (Run)Range 1, 16 MHz, 105°C; HSE bypass, peripherals disabledtyp 4.7 · max 8.9 mA91
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 2 MHz, 25°Ctyp 455 · max 720 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 2 MHz, 55°Ctyp 725 · max 1500 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 2 MHz, 85°Ctyp 1350 · max 3700 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 2 MHz, 105°Ctyp 2250 · max 6000 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 1 MHz, 25°Ctyp 280 · max 570 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 1 MHz, 55°Ctyp 545 · max 1300 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 1 MHz, 85°Ctyp 1200 · max 3500 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 1 MHz, 105°Ctyp 2100 · max 5800 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 250 KHz, 25°Ctyp 160 · max 410 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 250 KHz, 55°Ctyp 435 · max 1100 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 250 KHz, 85°Ctyp 1100 · max 3400 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 250 KHz, 105°Ctyp 2000 · max 5700 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 62.5 KHz, 25°Ctyp 130 · max 390 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 62.5 KHz, 55°Ctyp 405 · max 1000 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 62.5 KHz, 85°Ctyp 1050 · max 3400 uA92
Supply current in Low-power run mode IDD (LPRun)HSE bypass, peripherals disabled, 62.5 KHz, 105°Ctyp 1950 · max 5600 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 2 MHz, 25°Ctyp 920 · max 1300 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 2 MHz, 55°Ctyp 1200 · max 2000 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 2 MHz, 85°Ctyp 1850 · max 4200 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 2 MHz, 105°Ctyp 2750 · max 6600 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 1 MHz, 25°Ctyp 780 · max 1200 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 1 MHz, 55°Ctyp 1100 · max 1900 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 1 MHz, 85°Ctyp 1700 · max 4100 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 1 MHz, 105°Ctyp 2650 · max 6500 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 250 KHz, 25°Ctyp 725 · max 1100 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 250 KHz, 55°Ctyp 980 · max 1800 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 250 KHz, 85°Ctyp 1600 · max 4100 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 250 KHz, 105°Ctyp 2500 · max 6400 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 62.5 KHz, 25°Ctyp 720 · max 1100 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 62.5 KHz, 55°Ctyp 955 · max 1700 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 62.5 KHz, 85°Ctyp 1600 · max 4000 uA92
Supply current in Low-power run mode IDD (LPRun)HSI16, peripherals disabled, 62.5 KHz, 105°Ctyp 2500 · max 6300 uA92
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 25°Ctyp 190 · max 350 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 55°Ctyp 380 · max 920 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 85°Ctyp 980 · max 2700 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 105°Ctyp 1750 · max 5000 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 25°Ctyp 190 · max 350 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 55°Ctyp 380 · max 930 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 85°Ctyp 985 · max 2700 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 105°Ctyp 1750 · max 5100 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 25°Ctyp 190 · max 350 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 55°Ctyp 380 · max 940 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 85°Ctyp 985 · max 2700 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 105°Ctyp 1750 · max 5100 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 25°Ctyp 190 · max 360 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 55°Ctyp 380 · max 940 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 85°Ctyp 985 · max 2700 uA105
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 105°Ctyp 1750 · max 5200 uA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 1.8 V, 25°Ctyp 100 · max 270 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 1.8 V, 55°Ctyp 275 · max 1800 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 1.8 V, 85°Ctyp 1350 · max 4700 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 1.8 V, 105°Ctyp 3450 · max 8800 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 2.4 V, 25°Ctyp 110 · max 290 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 2.4 V, 55°Ctyp 325 · max 2100 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 2.4 V, 85°Ctyp 1600 · max 5200 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 2.4 V, 105°Ctyp 4100 · max 11000 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3 V, 25°Ctyp 130 · max 350 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3 V, 55°Ctyp 385 · max 2300 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3 V, 85°Ctyp 1900 · max 6200 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3 V, 105°Ctyp 4850 · max 12000 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3.6 V, 25°Ctyp 180 · max 670 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3.6 V, 55°Ctyp 530 · max 2400 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3.6 V, 85°Ctyp 2400 · max 7200 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog, VDD = 3.6 V, 105°Ctyp 6050 · max 14000 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog, VDD = 1.8 V, 25°Ctyp 300 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog, VDD = 2.4 V, 25°Ctyp 365 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog, VDD = 3 V, 25°Ctyp 435 nA105
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog, VDD = 3.6 V, 25°Ctyp 545 nA105
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 25°Ctyp 540 · max 770 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 55°Ctyp 725 · max 1900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 85°Ctyp 1800 · max 4900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 105°Ctyp 3850 · max 9300 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 25°Ctyp 700 · max 960 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 55°Ctyp 920 · max 3900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 85°Ctyp 2150 · max 5800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 105°Ctyp 4650 · max 11000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 25°Ctyp 885 · max 1300 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 55°Ctyp 1150 · max 4500 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 85°Ctyp 2650 · max 7000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 105°Ctyp 5550 · max 13000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 25°Ctyp 1100 · max 1600 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 55°Ctyp 1450 · max 5100 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 85°Ctyp 3350 · max 8200 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 105°Ctyp 7000 · max 15000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 1.8 V, 25°Ctyp 580 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 2.4 V, 25°Ctyp 760 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 3 V, 25°Ctyp 960 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 25°Ctyp 410 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 55°Ctyp 580 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 85°Ctyp 1600 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 105°Ctyp 3650 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 25°Ctyp 545 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 55°Ctyp 750 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 85°Ctyp 1950 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 105°Ctyp 4450 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 25°Ctyp 830 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 55°Ctyp 1150 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 85°Ctyp 2750 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 105°Ctyp 5800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 25°Ctyp 2200 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 55°Ctyp 3050 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 85°Ctyp 5550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 105°Ctyp 9550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 25°Ctyp 370 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 55°Ctyp 570 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 85°Ctyp 1350 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 105°Ctyp 3150 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 25°Ctyp 495 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 55°Ctyp 715 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 85°Ctyp 1650 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 105°Ctyp 3800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 25°Ctyp 655 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 55°Ctyp 915 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 85°Ctyp 2100 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 105°Ctyp 4550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 25°Ctyp 875 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 55°Ctyp 1350 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 85°Ctyp 2800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 105°Ctyp 5750 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V, 25°Ctyp 300 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V, 55°Ctyp 825 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V, 85°Ctyp 2950 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V, 105°Ctyp 6300 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V, 25°Ctyp 305 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V, 55°Ctyp 875 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V, 85°Ctyp 2900 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V, 105°Ctyp 6400 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V, 25°Ctyp 305 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V, 55°Ctyp 865 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V, 85°Ctyp 2950 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V, 105°Ctyp 6150 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V, 25°Ctyp 310 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V, 55°Ctyp 870 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V, 85°Ctyp 3000 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V, 105°Ctyp 6450 nA106
Supply current during wakeup from Standby mode IDD (wakeup from Standby)Wakeup clock HSI16 = 16 MHz, VDD = 3 V, 25°C; code execution from Flash, average over typical wakeup timetyp 2.46 mA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V, 25°Ctyp 19 · max 160 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V, 55°Ctyp 140 · max 390 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V, 85°Ctyp 885 · max 2100 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V, 105°Ctyp 2500 · max 6700 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V, 25°Ctyp 28 · max 190 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V, 55°Ctyp 180 · max 510 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V, 85°Ctyp 1050 · max 2400 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V, 105°Ctyp 2950 · max 7900 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V, 25°Ctyp 43 · max 220 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V, 55°Ctyp 230 · max 580 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V, 85°Ctyp 1300 · max 2900 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V, 105°Ctyp 3600 · max 9100 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V, 25°Ctyp 87 · max 300 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V, 55°Ctyp 360 · max 750 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V, 85°Ctyp 1750 · max 3500 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V, 105°Ctyp 4700 · max 11000 nA107
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 25°Ctyp 540 · max 770 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 55°Ctyp 725 · max 1900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 85°Ctyp 1800 · max 4900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 105°Ctyp 3850 · max 9300 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 125°Ctyp 8850 · max 25000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 25°Ctyp 700 · max 960 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 55°Ctyp 920 · max 3900 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 85°Ctyp 2150 · max 5800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 105°Ctyp 4650 · max 11000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 125°Ctyp 10500 · max 29000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 25°Ctyp 885 · max 1300 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 55°Ctyp 1150 · max 4500 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 85°Ctyp 2650 · max 7000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 105°Ctyp 5550 · max 13000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 125°Ctyp 12500 · max 33000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 25°Ctyp 1100 · max 1600 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 55°Ctyp 1450 · max 5100 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 85°Ctyp 3350 · max 8200 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 105°Ctyp 7000 · max 15000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 125°Ctyp 15500 · max 39000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 1.8 V; 25°Ctyp 580 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 2.4 V; 25°Ctyp 760 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 3 V; 25°Ctyp 960 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 3.6 V; 25°Ctyp 1200 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 25°Ctyp 410 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 55°Ctyp 580 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 85°Ctyp 1600 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 105°Ctyp 3650 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 125°Ctyp 8600 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 25°Ctyp 545 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 55°Ctyp 750 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 85°Ctyp 1950 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 105°Ctyp 4450 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 125°Ctyp 10500 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 25°Ctyp 830 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 55°Ctyp 1150 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 85°Ctyp 2750 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 105°Ctyp 5800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 125°Ctyp 13000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 25°Ctyp 2200 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 55°Ctyp 3050 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 85°Ctyp 5550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 105°Ctyp 9550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 125°Ctyp 18000 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25°Ctyp 370 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55°Ctyp 570 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85°Ctyp 1350 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105°Ctyp 3150 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 125°Ctyp 7100 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25°Ctyp 495 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55°Ctyp 715 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85°Ctyp 1650 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105°Ctyp 3800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 125°Ctyp 8350 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25°Ctyp 655 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55°Ctyp 915 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85°Ctyp 2100 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105°Ctyp 4550 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 125°Ctyp 9850 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25°Ctyp 875 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55°Ctyp 1350 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85°Ctyp 2800 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105°Ctyp 5750 nA106
Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 125°Ctyp 12000 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V; 25°Ctyp 300 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V; 55°Ctyp 825 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V; 85°Ctyp 2950 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V; 105°Ctyp 6300 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 1.8 V; 125°Ctyp 12550 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V; 25°Ctyp 305 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V; 55°Ctyp 875 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V; 85°Ctyp 2900 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V; 105°Ctyp 6400 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 2.4 V; 125°Ctyp 12500 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V; 25°Ctyp 305 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V; 55°Ctyp 865 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V; 85°Ctyp 2950 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V; 105°Ctyp 6150 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3 V; 125°Ctyp 12500 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V; 25°Ctyp 310 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V; 55°Ctyp 870 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V; 85°Ctyp 3000 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V; 105°Ctyp 6450 nA106
Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2)VDD = 3.6 V; 125°Ctyp 13000 nA106
Supply current during wakeup from Standby mode IDD (wakeup from Standby)Wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25°Ctyp 2.46 mA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 25°Ctyp 19 · max 160 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 55°Ctyp 140 · max 390 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 85°Ctyp 885 · max 2100 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 105°Ctyp 2500 · max 6700 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 125°Ctyp 6600 · max 21000 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 25°Ctyp 28 · max 190 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 55°Ctyp 180 · max 510 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 85°Ctyp 1050 · max 2400 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 105°Ctyp 2950 · max 7900 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 125°Ctyp 7800 · max 24000 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 25°Ctyp 43 · max 220 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 55°Ctyp 230 · max 580 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 85°Ctyp 1300 · max 2900 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 105°Ctyp 3600 · max 9100 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 125°Ctyp 9300 · max 27000 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 25°Ctyp 87 · max 300 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 55°Ctyp 360 · max 750 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 85°Ctyp 1750 · max 3500 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 105°Ctyp 4700 · max 11000 nA107
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 125°Ctyp 12000 · max 32000 nA107
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 25°Ctyp 330 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 55°Ctyp 445 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 85°Ctyp 1150 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 105°Ctyp 2700 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 125°Ctyp 6800 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 25°Ctyp 460 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 55°Ctyp 605 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 85°Ctyp 1450 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 105°Ctyp 3350 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 125°Ctyp 8150 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 25°Ctyp 745 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 55°Ctyp 1000 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 85°Ctyp 2200 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 105°Ctyp 4550 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 125°Ctyp 10500 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 25°Ctyp 2100 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 55°Ctyp 2850 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 85°Ctyp 4900 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 105°Ctyp 8150 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 125°Ctyp 15500 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25°Ctyp 285 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55°Ctyp 450 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85°Ctyp 1050 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105°Ctyp 2500 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25°Ctyp 410 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55°Ctyp 585 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85°Ctyp 1300 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105°Ctyp 3050 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25°Ctyp 565 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55°Ctyp 770 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85°Ctyp 1750 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105°Ctyp 3750 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25°Ctyp 780 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55°Ctyp 1200 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85°Ctyp 2400 nA108
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105°Ctyp 4850 nA108
Supply current during wakeup from Shutdown mode IDD(wakeup from Shutdown)Wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25°Ctyp 1.6 mA108
Bus MatrixRange 1 Boost modetyp 6.12 uA/MHz111
Bus MatrixRange 1 Normal modetyp 5.69 uA/MHz111
Bus MatrixRange 2typ 4.7 uA/MHz111
Bus MatrixLow-power run and sleeptyp 6.11 uA/MHz111
AHB1 to APB1 bridgeRange 1 Boost modetyp 0.26 uA/MHz111
AHB1 to APB1 bridgeRange 1 Normal modetyp 0.25 uA/MHz111
AHB1 to APB1 bridgeRange 2typ 0.22 uA/MHz111
AHB1 to APB1 bridgeLow-power run and sleeptyp 0.03 uA/MHz111
AHB1 to APB2 bridgeRange 1 Boost modetyp 0.39 uA/MHz111
AHB1 to APB2 bridgeRange 1 Normal modetyp 0.37 uA/MHz111
AHB1 to APB2 bridgeRange 2typ 0.32 uA/MHz111
AHB1 to APB2 bridgeLow-power run and sleeptyp 0.03 uA/MHz111
FSMCRange 1 Boost modetyp 10.21 uA/MHz111
FSMCRange 1 Normal modetyp 9.52 uA/MHz111
FSMCRange 2typ 7.87 uA/MHz111
FSMCLow-power run and sleeptyp 10.28 uA/MHz111
QUADSPIRange 1 Boost modetyp 3.51 uA/MHz111
QUADSPIRange 1 Normal modetyp 3.27 uA/MHz111
QUADSPIRange 2typ 2.69 uA/MHz111
QUADSPILow-power run and sleeptyp 3.51 uA/MHz111
CORDICRange 1 Boost modetyp 1.28 uA/MHz111
CORDICRange 1 Normal modetyp 1.19 uA/MHz111
CORDICRange 2typ 0.98 uA/MHz111
CORDICLow-power run and sleeptyp 0.78 uA/MHz111
CRCRange 1 Boost modetyp 0.74 uA/MHz111
CRCRange 1 Normal modetyp 0.68 uA/MHz111
CRCRange 2typ 0.57 uA/MHz111
CRCLow-power run and sleeptyp 0.63 uA/MHz111
DMA 1Range 1 Boost modetyp 2.83 uA/MHz111
DMA 1Range 1 Normal modetyp 2.64 uA/MHz111
DMA 1Range 2typ 2.17 uA/MHz111
DMA 1Low-power run and sleeptyp 2.75 uA/MHz111
DMA 2Range 1 Boost modetyp 3.11 uA/MHz111
DMA 2Range 1 Normal modetyp 2.9 uA/MHz111
DMA 2Range 2typ 2.39 uA/MHz111
DMA 2Low-power run and sleeptyp 2.43 uA/MHz111
DMAMUXRange 1 Boost modetyp 6.71 uA/MHz111
DMAMUXRange 1 Normal modetyp 6.26 uA/MHz111
DMAMUXRange 2typ 5.17 uA/MHz111
DMAMUXLow-power run and sleeptyp 6.68 uA/MHz111
SRAM1Range 1 Boost modetyp 0.58 uA/MHz111
SRAM1Range 1 Normal modetyp 0.54 uA/MHz111
SRAM1Range 2typ 0.44 uA/MHz111
SRAM1Low-power run and sleeptyp 0.54 uA/MHz111
FLASHRange 1 Boost modetyp 6.46 uA/MHz111
FLASHRange 1 Normal modetyp 6.01 uA/MHz111
FLASHRange 2typ 4.95 uA/MHz111
FLASHLow-power run and sleeptyp 6.15 uA/MHz111
FMACRange 1 Boost modetyp 4.59 uA/MHz111
FMACRange 1 Normal modetyp 4.29 uA/MHz111
FMACRange 2typ 3.57 uA/MHz111
FMACLow-power run and sleeptyp 3.83 uA/MHz111
Wakeup time from Sleep mode to Run mode tWUSLEEP-typ 11 · max 12 Nb of CPU cycles116
Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP-typ 10 · max 11 Nb of CPU cycles116
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 1; Wakeup clock HSI16 = 16 MHztyp 5.8 · max 6 us116
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 2; Wakeup clock HSI16 = 16 MHztyp 18.4 · max 19.1 us116
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 1; Wakeup clock HSI16 = 16 MHztyp 2.8 · max 3 us116
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 2; Wakeup clock HSI16 = 16 MHztyp 2.9 · max 3 us116
Wake up time from Stop 1 mode to Run in Flash tWUSTOP1Range 1; Wakeup clock HSI16 = 16 MHztyp 9.5 · max 9.8 us116
Wake up time from Stop 1 mode to Run in Flash tWUSTOP1Range 2; Wakeup clock HSI16 = 16 MHztyp 21.9 · max 22.7 us116
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 1; Wakeup clock HSI16 = 16 MHztyp 6.6 · max 6.9 us116
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 2; Wakeup clock HSI16 = 16 MHztyp 6.4 · max 6.6 us116
Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1Regulator in low-power mode (LPR=1 in PWR_CR1); Wakeup clock HSI16 = 16 MHz, HPRE = 8; maximum characterized from 0°C to 125°Ctyp 14.4 · max 15 us116
Wakeup time from Standby mode to Run mode tWUSTBYRange 1; Wakeup clock HSI16 = 16 MHztyp 29.7 · max 33.8 us116
Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2Range 1; Wakeup clock HSI16 = 16 MHztyp 29.7 · max 33.5 us116
Wakeup time from Shutdown mode to Run mode tWUSHDNRange 1; Wakeup clock HSI16 = 16 MHz; maximum characterized from 0°C to 125°Ctyp 267.9 · max 274.6 us116
Wakeup time from Low-power run mode to Run mode tWULPRUNWakeup clock HSI16 = 16 MHz with HPRE = 8; time until REGLPF flag is cleared in PWR_SR2typ 5 · max 7 us116
Oscillator frequency fOSC_IN-min 4 · typ 8 · max 48 MHz119
Feedback resistor RF-typ 200 kΩ119
HSE current consumption IDD(HSE)During startup; first 2/3 of tSU(HSE)max 5.5 mA119
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHztyp 0.44 mA119
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHztyp 0.45 mA119
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHztyp 0.68 mA119
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHztyp 0.94 mA119
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHztyp 1.77 mA119
Maximum critical crystal transconductance GmStartupmax 1.5 mA/V119
Startup time tSU(HSE)VDD is stabilized; stabilized 8 MHz oscillationtyp 2 ms119
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C; ANSI/ESDA/JEDEC JS-001; Class 2max 2000 V128
Electrostatic discharge voltage (charge device model) VESD(CDM)Other packages: LQFP64; TA = +25 °C; ANSI/ESDA/JEDEC JS-002; Class C2amax 500 V128
Output low level voltage for an I/O pin VOLCMOS port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 Vmax 0.4 V132
Output low level voltage for an I/O pin VOLTTL port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 Vmax 0.4 V132
Output high level voltage for an I/O pin VOHTTL port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 Vmin 2.4 V132
Output low level voltage for an I/O pin VOLAll I/Os except FT_c; |IIO| = 20 mA; VDD ≥ 2.7 Vmax 1.3 V132
Output low level voltage for an I/O pin VOL|IIO| = 1 mA for FT_c I/Os, 4 mA for other I/Os; VDD ≥ 1.62 Vmax 0.4 V132
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+|IIO| = 20 mA; VDD ≥ 2.7 Vmax 0.4 V132
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+|IIO| = 10 mA; VDD ≥ 1.62 Vmax 0.4 V132
Maximum frequency FmaxFM+; C=50 pF, 1.6 V≤VDD≤3.6 Vmax 1 MHz134
Output high to low level fall time Tr/TFFM+; C=50 pF, 1.6 V≤VDD≤3.6 Vmax 5 ns134
Maximum frequency FmaxSpeed 0; C=50 pF, 2.7 V≤VDD≤3.6 Vmax 2 MHz134
Maximum frequency FmaxSpeed 0; C=50 pF, 1.6 V≤VDD≤2.7 Vmax 1 MHz134
Output H/L to L/H level fall time Tr/TfSpeed 0; C=50 pF, 2.7 V≤VDD≤3.6 Vmax 170 ns134
Output H/L to L/H level fall time Tr/TfSpeed 0; C=50 pF, 1.6 V≤VDD≤2.7 Vmax 330 ns134
Maximum frequency FmaxSpeed 1; C=50 pF, 2.7 V≤VDD≤3.6 Vmax 10 MHz134
Maximum frequency FmaxSpeed 1; C=50 pF, 1.6 V≤VDD≤2.7 Vmax 5 MHz134
Output H/L to L/H level fall time Tr/TfSpeed 1; C=50 pF, 2.7 V≤VDD≤3.6 Vmax 35 ns134
Output H/L to L/H level fall time Tr/TfSpeed 1; C=50 pF, 1.6 V≤VDD≤2.7 Vmax 65 ns134
USB transceiver operating voltage VDDTA = -40 to 125 °C; full USB electrical characteristicsmin 3 · max 3.6 V181
USB crystal less operation temperature tCrystal_lessmin -15 · max 85 °C181
Embedded USB_DP pull-up value during idle RPUITA = -40 to 125 °Cmin 900 · typ 1250 · max 1500 Ω181
Embedded USB_PD pull-up value during reception RPURTA = -40 to 125 °Cmin 1400 · typ 2300 · max 3200 Ω181
Output driver impedance ZsDRVDriving high and low; TA = -40 to 125 °Cmin 28 · typ 36 · max 44 Ω181
USART clock frequency fCKMaster mode; OSPEEDRy[1:0] = 10; C=30 pFmax 21 MHz181
USART clock frequency fCKSlave mode; OSPEEDRy[1:0] = 10; C=30 pFmax 22 MHz181
NSS hold time th(NSS)Slave mode; OSPEEDRy[1:0] = 10; C=30 pFmin 2 ns181
Data input setup time tsu(RX)Slave mode; OSPEEDRy[1:0] = 10; C=30 pFmin 2 ns181
Data input hold time th(RX)Master mode; OSPEEDRy[1:0] = 10; C=30 pFmin 1 ns181
Data input hold time th(RX)Slave mode; OSPEEDRy[1:0] = 10; C=30 pFmin 0.5 ns181
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm; table Value columntyp 47.9 °C/W230

Open-source boards using it

33See all 33
  • 4 layers100 × 52.3 mmDMX, the printed circuit board in 3D

    DMX

    CShark/Lumen-ArtNode

    A simple four port USB-DMX ArtNET-Node

    61 parts24
  • 6 layers131.5 × 132.4 mmBedCooler, the printed circuit board in 3D

    BedCooler

    NicholasKorth/BedCooler

    A dual-zone heating and cooling controller for a bed: a 6-layer KiCad board with an STM32G474 real-time controller and a Raspberry Pi Compute Module 5 host.

    258 parts11
  • 2 layers109.2 × 91.4 mmFunctionGeneratorCortexM4, the printed circuit board in 3D

    FunctionGeneratorCortexM4

    cracked-machine/FunctionGeneratorCortexM4_HW

    A function generator powered by ARM Cortex M4

    119 parts2MIT
  • 4 layers52 × 48 mmHand hub, the printed circuit board in 3D

    Hand hub

    6thSense-dev/mocap-glove

    Magnetic MoCap glove firmware, tracking diagnostics and local hand visualizer

    106 parts
  • 4 layers95.9 × 90.2 mmHab1 flight, the printed circuit board in 3D

    Hab1 flight

    barcklay/Cube_SAT

    Building Sattelite part time

    75 parts
  • 4 layers93.5 × 101 mmProjectAtlas, the printed circuit board in 3D

    ProjectAtlas

    BYU-Racing/SH_PCB

    Sensor Hub PCB Development

    131 parts
  • 2 layers40 × 72 mmBCU, the printed circuit board in 3D

    BCU

    Coilchain/Coilchain-Hardware

    70 partsApache-2.0
  • 4 layers38.5 × 42 mmM FC, the printed circuit board in 3D

    M FC

    Def12345678/M-FC-G474-Rev-A

    Modular STM32G474 Flight Controller Rev-A. Focus on modularity using JST-SH connectors for all peripherals (ESC, RX, etc.). ICM-42688-P IMU and DPS368 barometer. Requires external 5V 2.5A (no onboard BEC).

    112 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32G474RET6?

Yes. The symbol is MCU_ST_STM32G4:STM32G474RETx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32G474RET6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32G474RET6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32G474RET6?

JLCPCB lists it as part C521608, with 125 in stock; the sellers' links on this page open their listings.

What can replace the STM32G474RET6?

Parts like it in the library: the AT32F403ARCT7 by ARTERY, the STM32G474RBT3 by STMicroelectronics, the AT32F403ARGT7 by ARTERY and the HC32F460KCTA-LQFP64 by XHSC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32G474RET6?

33 boards in 27 repositories on GitHub; the most starred are listed on this page, with their KiCad files.