
Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate

Pkm agv is an open-source printed circuit board by Greatreyhan, from the Greatreyhan/AGV_PCB repository on GitHub. It is a 2-layer board of 198.6 × 51.3 mm with 28 parts on 53 nets, routed with 334 tracks and 22 vias.
It is built around the AMS1117-5.0. Its parts include 21 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C2 |
| 2 | MOTORB | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J16, J18 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | ACTA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | ACTB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J21 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BATTMCU | XT90PW-M:AMASS_XT90PW-M | J19 |
| 1 | BATTMTR | XT90PW-M:AMASS_XT90PW-M | J14 |
| 1 | BlackPill_STLINK | BlackPill_STLINK:BlackPill_STLINK | U3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | DRVAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | DRVAR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DRVBL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | DRVBR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DRVCL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | DRVCR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DRVDL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | DRVDR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ECNB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | ENCA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | ENCC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | ENCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | MOTORA | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J15 |
| 1 | MOTORC | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J17 |
| 1 | UARTCOM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |

DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate

rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2

victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying


johannesstrueber/dots
DOTS eurorack module pcb schematics and code ATMega328 based



It measures 198.6 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Greatreyhan/AGV_PCB repository on GitHub, at the commit this page was made from: the board is pkm_agv.kicad_pcb and its schematic pkm_agv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Greatreyhan before reusing the design.