

Wh3lk
Lil eurorack power module, primarily for prototyping.
- Size
- 45 × 33.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 16
- Pads
- 67
- Tracks, vias
- 151, 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Sep 2024
- Updated
- 28 Sep 2024
Overview
Wh3lk is an open-source printed circuit board by genoqllc, from the genoqllc/wh3lk repository on GitHub. It is a 4-layer board of 45 × 33.5 mm with 23 parts on 16 nets, routed with 151 tracks and 15 vias.
It is built around the LM4040DIM3-10.0/NOPB and 302-S101. Its parts include 10 capacitors, 3 diodes, 2 ICs, 2 connectors and 1 resistor. It belongs with the audio and music boards of this library.
Main components
2README
README.mdwh3lk submodular power pack
A lil eurorack power module, primilary for prototyping. Takes 16 pin eurorack power and outputs:
- +12V
- +5V
- +3.3V
- +3.3VA (filtered for analog devices)
- -12V
- -10V reference
- GND
Releases
Upon merging to main and creating a release, the Makefile.yml Github Action will build the project and attach the following to the release:
wh3lk-$(GIT_TAG).zip- Gerbers, drill files, DRC reportwh3lk-$(GIT_TAG).bom.csv- A BOM in CSV format, ready for JLCPCB assemblywh3lk-$(GIT_TAG).bom.xml- Original KiCad XML BOMwh3lk-$(GIT_TAG).pos.csv- A POS in CSV format, ready for JLCPCB assembly
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 22uF | winterbloom:C_0805_HandSolder | C1, C2, C3, C4, C5, C6, C7, C10 |
| 4 | 600R@100MHz | winterbloom:L_0603_HandSolder | FB1, FB2, FB3, FB4 |
| 3 | 30V | winterbloom:D_SOD-123 | D1, D2, D3 |
| 1 | 100nF | winterbloom:C_0805_HandSolder | C9 |
| 1 | 10uF | winterbloom:C_0805_HandSolder | C8 |
| 1 | 2k2R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | Eurorack_Power | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LM4040DBZ-10 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 4 layers70.8 × 108 mm

- 2 layers120 × 102.5 mm

Dsug cctv BOARD
LucasLHenry/spelltwister
This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.
251 partsMIT - 4 layers60 × 110 mm

- 4 layers30 × 53.5 mm

Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
54 parts20 - 2 layers20 × 108 mm

Helium
wntrblm/Helium
Helium is a triple 1-to-3 precision buffered multiple and 3-to-1 precision adder
67 parts17 - 4 layers243.8 × 245.5 mm

Neotron Common Hardware
Neotron-Compute/Neotron-Common-Hardware
Contains KiCad footprints and symbols shared across multiple Neotron projects.
287 parts4CC-BY-SA-4.0 - 2 layers80 × 96 mm

Programmer Board
Reid-n0rc/LMS-6_Interface_Board
Interface to the LMS-6 radiosonde carde edge connector.
55 parts4GPL-3.0 - 4 layers126 × 57 mm

Questions
How big is the Wh3lk PCB?
It measures 45 × 33.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Wh3lk use?
23 parts, built around the LM4040DIM3-10.0/NOPB and 302-S101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wh3lk KiCad files?
From the genoqllc/wh3lk repository on GitHub, at the commit this page was made from: the board is hardware/wh3lk.kicad_pcb and its schematic hardware/prep.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wh3lk design in my own project?
Its repository states no licence, so its author keeps all rights: ask genoqllc before reusing the design.