

Multiribbon
- Size
- 107 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 71
- Pads
- 220
- Tracks, vias
- 551, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 May 2025
- Updated
- 23 May 2025
Overview
Multiribbon is an open-source printed circuit board by g200kg, from the g200kg/multiribbon repository on GitHub, published under the MIT licence. It is a 2-layer board of 107 × 80 mm with 65 parts on 71 nets, routed with 551 tracks and 38 vias.
It is built around the LM358DR2GH, PAM8302AADCR and AMS1117-5.0, with the CD74HC4051M96, BLM18AG121SN1D and B5819W among its other parts. Its parts include 22 resistors, 18 capacitors, 5 ICs, 5 connectors and 1 diode.
Main components
6LM358DR2GH
SOIC-80℃~+70℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 5nA 70dB 7uV/℃ Built-in compensation、ESD Protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierPAM8302AADCR
SOP-8-40℃~+85℃ 0.3% 1-Channel 2.5Wx1@4Ω 2V~5.5V 4mA 50dB 80dB 85% Class D Filterless architecture SOP-8 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCD74HC4051M96
SOIC-16-55℃~+125℃ 19ns 23ns 2V~6V 4ns 70Ω 8:1 SOIC-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersBLM18AG121SN1D
UncategorisedUnknown makerB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdParts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C6, C9, C13, C15 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R6, R8, R10, R16, R17, R18 |
| 6 | 220R | Resistor_SMD:R_0603_1608Metric | R3, R5, R7, R9, R20, R21 |
| 5 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C7, C8, C11, C14, C16 |
| 5 | 20K | MyLib:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4, RV5 |
| 4 | Hole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 4.7K | Resistor_SMD:R_0603_1608Metric | R12, R13, R15 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C4, C10 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric | R19, R22 |
| 2 | BLM18AG121SN1D | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J1, J2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 6.8K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | BATT | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief | J3 |
| 1 | CD74HC4051M96 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | LM358DR2G | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | MyLib:g200kgLogo | LG1 |
| 1 | ModuleNC | MyLib:006P | M1 |
| 1 | PAM8302AAD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | SW_SPDT_G | MyLib:Sw_Rocker_4MS1R202M6QES | SW1 |
| 1 | Speaker | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | XIAO RA4M1 | MyLib:XIAO-RA4M1-SMD | U2 |
| 1 | XKB_PJ-342B | MyLib:Jack_3.5mm_XKB_PJ342B-TX | J5 |
More from g200kg/multiribbon
1- 2 layers310 × 60 mm

Similar boards
- 2 layers115.7 × 103 mm

- 4 layers92.9 × 60.9 mm

Custom relay board
SamanHushi/esp_smart_relay_board
Project to conect multiple low power 5V and 12V devices, messure usage and control it with ESPHome
70 parts - 4 layers285 × 94.6 mm

- 2 layers20.1 × 22.4 mm

- 4 layers160.7 × 51.7 mm

- 2 layers80 × 36 mm

Freepdk
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
60 parts21CC-BY-SA-4.0 - 2 layers49 × 67 mm

Calliope mirror heater
openUC2/TechnicalDocs-openUC2-HoloBox
This is the holographic box for openUC2
67 parts5 - 2 layers68.6 × 99.1 mm

Questions
How big is the Multiribbon PCB?
It measures 107 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multiribbon use?
65 parts, built around the LM358DR2GH, PAM8302AADCR, AMS1117-5.0 and CD74HC4051M96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multiribbon KiCad files?
From the g200kg/multiribbon repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multiribbon design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

