Skip to the content
2 layers115.7 × 103 mmProject1, the printed circuit board in 3D
Size
115.7 × 103 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
61
Pads
230
Tracks, vias
723, 68
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 May 2026
Updated
31 May 2026

Overview

Project1 is an open-source printed circuit board by Landjetelina, from the Landjetelina/Micromouse repository on GitHub. It is a 2-layer board of 115.7 × 103 mm with 46 parts on 61 nets, routed with 723 tracks and 68 vias.

It is built around the TB6612FNG,C,8,EL, CD74HC4051M96 and CRCW0805100RFKEAC, with the CRCW0805100KFKEAC, CRCW08051K80FKEAC and CRCW080568R0FKEAC among its other parts. Its parts include 19 resistors, 8 transistors, 5 capacitors, 5 diodes and 3 switches. It belongs with the RP2040 boards of this library.

Main components

12

README

hardware/project1/readme.md

zippano je preveliko pa moram ovako

Parts

46
QtyValueFootprintReferences
4100Resistor_SMD:R_0805_2012MetricR13, R16, R17, R18
4100kResistor_SMD:R_0805_2012MetricR3, R5, R8, R14
41k8Resistor_SMD:R_0805_2012MetricR23, R24, R25, R26
475Resistor_SMD:R_0805_2012MetricR1, R6, R11, R15
4Q_NMOS_GSDPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
4SFH4545LED_THT:LED_D5.0mm_Horizontal_O3.81mm_Z3.0mmD5, D7, D8, D9
4TEFT4300LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mmQ5, Q6, Q7, Q9
3100nFCapacitor_SMD:C_0603_1608MetricC10, C11, C12
210kResistor_SMD:R_0805_2012MetricR9, R10
2N20 DC Motor with Magnetic EncoderConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalMotor_Left_A1, Motor_Right_B1
2SW_SPDTButton_Switch_SMD:SW_SPDT_CK_JS102011SAQNSW2, SW5
1100µFCapacitor_SMD:C_0805_2012MetricC6
110µFCapacitor_SMD:C_0603_1608MetricC5
1220Resistor_SMD:R_0805_2012MetricR12
1Battery_CellConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalBT2
1CD74HC4051MPackage_SO:SOIC-16_4.55x10.3mm_P1.27mmU4
1LEDLED_SMD:LED_0805_2012MetricD6
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW3
1TB6612FNGPackage_SO:SSOP-24_5.3x8.2mm_P0.65mmU2

Similar boards

  • 4 layers191.2 × 190.9 mmNeptune, the printed circuit board in 3D

    Neptune

    Board-Folk/Neptune

    Recreation of the cancelled Sega console that combines Mega Drive/Genesis with 32X.

    379 parts180
  • 4 layers101.6 × 76.2 mmPco2-sensor board, the printed circuit board in 3D

    Pco2-sensor board

    NOAA-PMEL/ASVCO2

    Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system

    154 parts
  • 4 layers99.9 × 99.9 mmHub, the printed circuit board in 3D

    Hub

    BCIT-BAJA/BCIT-BAJA-DAQ

    The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.

    101 parts
  • 2 layers280 × 205 mmQpcb, the printed circuit board in 3D

    Qpcb

    leonardobove/qpcb

    QPCB: Quantum Pulse Conversion Board

    257 parts
  • 4 layers70 × 99.9 mmMicromouse, the printed circuit board in 3D

    Micromouse

    UBIEEE/FrankenMouse

    FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.

    100 parts6MIT
  • 4 layers80 × 87.6 mmAratMicro, the printed circuit board in 3D

    AratMicro

    vorlaxen-labs/AratMicro

    High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).

    110 parts1MIT
  • 4 layers82 × 100 mmPCB Kicad, the printed circuit board in 3D

    PCB Kicad

    ChristopherAwomolo/Nova-Micromouse

    Newer version based off the Futura Micromouse

    121 partsMIT

Questions

How big is the Project1 PCB?

It measures 115.7 × 103 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project1 use?

46 parts, built around the TB6612FNG,C,8,EL, CD74HC4051M96, CRCW0805100RFKEAC and CRCW0805100KFKEAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project1 KiCad files?

From the Landjetelina/Micromouse repository on GitHub, at the commit this page was made from: the board is hardware/project1/project1.kicad_pcb and its schematic hardware/project1/project1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Landjetelina before reusing the design.