
Flow controller
NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system

Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system
Pco2-sensor board is an open-source printed circuit board by NOAA-PMEL, from the NOAA-PMEL/ASVCO2 repository on GitHub. It is a 4-layer board of 101.6 × 76.2 mm with 154 parts on 194 nets, routed with 1,047 tracks and 366 vias.
It is built around the MSP430FR5994IPNR, MAX3224EETP+ and SN74LVC1G240DBVR-TP, with the BME280, AB0805-T3 and AQY211G2SX among its other parts. Its parts include 61 resistors, 51 capacitors, 15 ICs, 6 connectors and 2 inductors. It belongs with the sensors and measurement boards and the MSP430 boards of this library.
KiCad port of ASVCO2 Flow Control board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R8, R10, R15, R84, R85, R86, R100, R101, R102, R103, R104 +7 |
| 20 | 100n | Capacitor_SMD:C_0805_2012Metric | C9, C20, C21, C26, C55, C56, C60, C80, C81, C82, C100, C101, C102, C103, C104, C105 +4 |
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R20, R21, R31, R33, R109, R110, R111, R112, R113, R114, R115 |
| 8 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C15, C50, C51, C52, C54, C83, C84 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C11, C12, C22, C25 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R105, R106, R107, R108 |
| 4 | 430450402 | pco2-sensor-board:430450402 | J1, J4, J5, J6 |
| 4 | MountingHole | MountingHole:MountingHole_6.4mm_M6 | H1, H2, H3, H4 |
| 3 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C53, C85, C91 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | 3V3, 15V1, BATT1 |
| 2 | 0ZCG0075FF2C | pco2-sensor-board:0ZCG0075FF2C | PF7, PF81 |
| 2 | 1 | Resistor_SMD:R_0805_2012Metric | R14, R94 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C27, C28 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R12, R92 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R7, R24 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R50, R51 |
| 2 | 71.5k | Resistor_SMD:R_0805_2012Metric | R9, R91 |
| 2 | MAX3224EETP+ | pco2-sensor-board:MAX3224EETP+ | U11, U80 |
| 2 | MPZ1608S101ATD25 | pco2-sensor-board:MPZ1608S101ATD25 | FB1, FB10 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R60 |
| 1 | 10.7k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R32 |
| 1 | 100n | pco2-sensor-board:CAPC2012X88N | C23 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric | C90 |
| 1 | 110p | Capacitor_SMD:C_0805_2012Metric | C94 |
| 1 | 2.2n | pco2-sensor-board:CAPC2013X88N | C30 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R93 |
| 1 | 220n | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 220u | pco2-sensor-board:VLCF4028T-220MR72-2 | L11 |
| 1 | 226k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 22u | pco2-sensor-board:CKG57NX7S1H226M500JH | C95 |
| 1 | 24.9k | Resistor_SMD:R_0805_2012Metric | R90 |
| 1 | 309k | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 3220-10-0100-00 | pco2-sensor-board:3220-10-0100-00 | JTAG_MINI1 |
| 1 | 33u | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 33uH | pco2-sensor-board:7443551331 | L9 |
| 1 | 4.7n | Capacitor_SMD:C_0805_2012Metric | C93 |
| 1 | 430450202 | pco2-sensor-board:430450202 | J2 |
| 1 | 430450602 | pco2-sensor-board:430450602 | J7 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R52 |
| 1 | 470k | Resistor_SMD:R_0805_2012Metric | R80 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric | C61 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 49.9k | Resistor_SMD:R_0805_2012Metric | R81 |
| 1 | 91p | Capacitor_SMD:C_0805_2012Metric | C92 |
| 1 | AB0805-T3 | pco2-sensor-board:QFN50P300X300X90-17N | U6 |
| 1 | ABLS-3.6864MHZ-B4-T | pco2-sensor-board:ABLS-3.6864MHZ-B4-T | Y80 |
| 1 | ABS06-107-32.768KHZ-T | pco2-sensor-board:ABS0610732768KHZT | Y60 |
| 1 | AQY211G2SX | pco2-sensor-board:AQY211G2SX | U7 |
| 1 | BME280 | pco2-sensor-board:BME280 | U21 |
| 1 | DHL-5R5D224T | pco2-sensor-board:DHL-5R5D224T | C1 |
| 1 | ISL60002BIH310Z-TK | pco2-sensor-board:ISL60002BIH310Z-TK | U20 |
| 1 | KC2520Z7.37280C1KX00 | pco2-sensor-board:SG-210STF 7.3728ML | U50 |
| 1 | LDL212DR | pco2-sensor-board:LDL212DR | U81 |
| 1 | LGR971-KN-1 | pco2-sensor-board:LGR971-KN-1 | GRN_LED1 |
| 1 | LS R976-NR-1 | pco2-sensor-board:LGR971-KN-1 | RED_LED1 |
| 1 | LT1672IS8-PBF | pco2-sensor-board:LT1672IS8-PBF | U2 |
| 1 | LT3970EMS-3.3-PBF | pco2-sensor-board:LT3970EMS-3.3-PBF | U1 |
| 1 | LTC3115IDHD-1-PBF | pco2-sensor-board:LTC3115IDHD-1-PBF | U9 |
| 1 | MAX3109ETJ+ | pco2-sensor-board:MAX3109ETJ+ | U8 |
| 1 | MEM2012F10R0 | pco2-sensor-board:MEM2012F10R0 | FL50 |
| 1 | MSP430FR5994IPNR | pco2-sensor-board:MSP430FR5994IPNR | U5 |
| 1 | NANOSMDC020F | pco2-sensor-board:NANOSMDC020F-2 | PF1 |
| 1 | SI1330EDL-T1-GE3 | pco2-sensor-board:SI1330EDL-T1-GE3 | Q1 |
| 1 | SN74LVC1G240DBVR | pco2-sensor-board:SN74LVC1G240DBVR | U30 |
| 1 | TPL5010DDCR | pco2-sensor-board:TPL5010DDCR | U3 |

NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system

NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system

Board-Folk/Neptune
Recreation of the cancelled Sega console that combines Mega Drive/Genesis with 32X.

bootchk/MSP430FR2433Breakout
A minimal breakout board for Texas Instrument's MSP430FR2433 embedded microprocessor, including just an Abracon RTC.

Greentalinjo/74HController
A game controller built entirely from discrete 74HC logic - no microcontroller, a diode ROM and an 8-N-1 serial frame out of an RJ45 console port.

jlab-sensing/ENTS-node-hardware
Schematics and design for soil MFC voltage and current sensing




Game-Team-SLSC/eurobot-2026-robot
The repo for firmware and hardware and docs of the 2026 Game Team's robot for CDFR Junior
It measures 101.6 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
154 parts, built around the MSP430FR5994IPNR, MAX3224EETP+, SN74LVC1G240DBVR-TP and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NOAA-PMEL/ASVCO2 repository on GitHub, at the commit this page was made from: the board is pCO2Sensor/Electrical/pco2-sensor-board.kicad_pcb and its schematic FlowController/Electrical/DRV8823-A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NOAA-PMEL before reusing the design.