2 layers102.4 × 77.4 mm
2 layers104.1 × 79.4 mm
PSE RP2040
G10v4nn/PPSE_Board_Code- Size
- 104.1 × 79.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 104
- Pads
- 516
- Tracks, vias
- 814, 137
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jun 2023
- Updated
- 24 Jul 2023
Overview
PSE RP2040 is an open-source printed circuit board by G10v4nn, from the G10v4nn/PPSE_Board_Code repository on GitHub. It is a 2-layer board of 104.1 × 79.4 mm with 134 parts on 104 nets, routed with 814 tracks and 137 vias.
It is built around the RP2040, CAT24C256LI and MMA8451QR1, with the SAM-M8Q-0, XC6220B331MR and WS2812B among its other parts. Its parts include 44 capacitors, 29 resistors, 24 diodes, 9 ICs and 8 switches. It belongs with the RP2040 boards of this library.
Main components
8
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
CAT24C256LI
PDIP-81,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHSonsemiEEPROM
MMA8451QR1
QFN-16(3x3)-40℃~+85℃ 1.8uA 1.95V~3.6V 14bit Accelerometer I2C X,Y,Z ±8g 运动事件检测 QFN-16(3x3) Accelerometers ROHSNXP SemiconductorsAccelerometers
SAM-M8Q-0
SMD-20P,15x15mmUncategorisedu-blox
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
US1B
SMA-65℃~+150℃ 100V 1A 1V@1A 50ns 5uA SMA Fast Recovery / High Efficiency Diodes ROHSDiodes IncorporatedFast Recovery / High Efficiency Diodes
DTC114Y
--55℃~+150℃ 1 NPN 100nA 50V NPN - Bipolar (BJT)onsemiBipolar (BJT)
README
Readme.mdUsb data logger
This project was done as a final paper in the electronic systems design and prototyping course. In the document folder you can read the report explaining the project and the schematics of the electronic part. In the other two folders are the files for the hardware and firmware design.
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100n | Capacitor_SMD:C_0603_1608Metric | C12, C13, C14, C15, C16, C19, C20, C21, C24, C26, C31, C32, C33, C34, C35, C36 +10 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R4, R6, R13, R14, R22, R24, R26, R27 |
| 9 | 1N4148 | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D2, D3, D7, D8, D21, D22, D23, D24 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R5, R7, R11, R12, R21, R23, R25, R28 |
| 8 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D12, D13, D14, D15, D16, D17, D18, D19 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C42, C43, C44 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C10, C11, C41 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R19, R31, R32 |
| 3 | US1B | Diode_SMD:D_SMA | D5, D6, D11 |
| 2 | 10u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C22, C23 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C28, C30 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 510 | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J7 |
| 2 | MountingHole | MountingHole:MountingHole_3mm | H1, H2 |
| 2 | PWR_LED | LED_SMD:LED_0603_1608Metric | D9, D10 |
| 1 | 1.5KExxA | Diode_SMD:D_SMC | D4 |
| 1 | 1.8k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 12Vin | Samac_Sys:282834-2_1 | J1 |
| 1 | 1u 35V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C25 |
| 1 | 2.2u | Samac_Sys:LQH44PN100MJ0L | L2 |
| 1 | 200mA 120Ohm | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 3v3 | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C50 |
| 1 | 4.7u 10V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C27 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 5v | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP3 |
| 1 | CAT24C256 | Samac_Sys:SOIC127P790X216-8N | U9 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | DNP 10k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | DTC114Y | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | IRLML2042 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D20 |
| 1 | MMA8451QR1 | PSE:MMA8452QT_HS | IC1 |
| 1 | MT-8530 | PSE:MT-8530 | U3 |
| 1 | PMOS | Samac_Sys:SOT95P237X112-3N | Q1 |
| 1 | PROG_SW | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW3 |
| 1 | Polyfuse | Samac_Sys:FUSC5141X200N | F1 |
| 1 | RESET_SW | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW8 |
| 1 | RP2040 | PSE:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_HS | U4 |
| 1 | SAM-M8Q | PSE:ublox_SAM-M8Q_HS | U2 |
| 1 | SSD1306 | SSD1306-128x64:128x64OLED | B1 |
| 1 | SW_ALIM | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
| 1 | SW_D | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | SW_L | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW6 |
| 1 | SW_R | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW5 |
| 1 | SW_U | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | TC1047AxNB | Package_TO_SOT_SMD:SOT-23 | U8 |
| 1 | TEMP | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP2 |
| 1 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J2 |
| 1 | USER_SW | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW7 |
| 1 | Vout_5V | Samac_Sys:282834-2_1 | J3 |
| 1 | W25Q16JVUSSQ | Samac_Sys:SOIC127P600X175-8N | U1 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U7 |
Questions
How big is the PSE RP2040 PCB?
It measures 104.1 × 79.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSE RP2040 use?
134 parts, built around the RP2040, CAT24C256LI, MMA8451QR1 and SAM-M8Q-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSE RP2040 KiCad files?
From the G10v4nn/PPSE_Board_Code repository on GitHub, at the commit this page was made from: the board is PCB/PSE_RP2040/PSE_RP2040.kicad_pcb and its schematic PCB/PSE_RP2040/PSE_RP2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSE RP2040 design in my own project?
Its repository states no licence, so its author keeps all rights: ask G10v4nn before reusing the design.
Similar boards
- 4 layers252 × 152 mm
CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers50 × 40 mm
MiniSynth
marcusmueller/MiniSynth
A small, MAX2870-based synthesizer with integrated oscillator or selectable external reference clock input.
78 parts3 - 2 layers99.4 × 99.4 mm
RP2350 80QFN minimal
alvestav/alvestav-lee-thesis-project-2025
This is the GitHub repository for the thesis project in computer and electronics engineering by Alvestav and Lee
166 partsMIT - 2 layers85.6 × 54 mm
PersonalPCB BC
Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake
73 partsMIT - 2 layers54 × 99.8 mm
- 4 layers35 × 50 mm
- 2 layers51 × 60 mm
