
Pilkbrain
cr1tbit/pilkbrain
The schematic is still a bit messy, just for the reference for now.

Tama is an open-source printed circuit board by rough-rat, from the rough-rat/tama repository on GitHub. It is a 4-layer board of 35 × 50 mm with 74 parts on 69 nets, routed with 753 tracks and 117 vias.
It is built around the ESP32-S3-WROOM-1-N8, ALS-PT204-6C/L177 and HDC1080DMBR, with the BQ24073RGTR, MMA8451QR1 and SM02B-GHS-TB(LF)(SN) among its other parts. Its parts include 29 resistors, 23 capacitors, 8 ICs, 3 switches and 2 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C8, C10, C13, C16, C17, C19, C20, C21, C22, C23 |
| 11 | 3k | Resistor_SMD:R_0402_1005Metric | R1, R8, R13, R14, R16, R20, R21, R23, R25, R26, R27 |
| 10 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C9, C11, C12, C14, C15, C18 |
| 8 | 100k | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R17, R19, R24, R28, R29 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R7, R15, R18, R22 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3, R6, R12 |
| 2 | EVQPUC02K | easyeda2kicad:SW-SMD_EVQPUD02K | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | ALS-PT204-6C/L177 | easyeda2kicad:SENSOR-TH_BD4.0-P2.54-D0.5-1 | U7 |
| 1 | BQ24073RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U2 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U4 |
| 1 | GT-USB-7055E | easyeda2kicad:USB-C-SMD_GT-USB-7055E | USB1 |
| 1 | HDC1080DMBR | easyeda2kicad:SENSOR-SMD_HDC1080DMBR | S1 |
| 1 | LED_RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_WHITE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MIC-4013-G-G00 | easyeda2kicad:MIC-SMD_BD4.0-4013_SMDA | MIC102 |
| 1 | MLT-8530 | easyeda2kicad:BUZ-SMD_4P-L8.5-W8.5-P8.50-BR | BUZZER2 |
| 1 | MMA8451QR1 | easyeda2kicad:QFN-16_L3.0-W3.0-P0.50-TL_FXOS8700CQR1 | U9 |
| 1 | SM02B-GHS-TB(LF)(SN) | easyeda2kicad:CONN-SMD_SM02B-GHS-TB-LF-SN | U5 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SY6280AAC | easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U3 |
| 1 | TestPoint_2Pole | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | TP3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U6 |
It measures 35 × 50 mm and has 4 copper layers, 1.6 mm thick.
74 parts, built around the ESP32-S3-WROOM-1-N8, ALS-PT204-6C/L177, HDC1080DMBR and BQ24073RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rough-rat/tama repository on GitHub, at the commit this page was made from: the board is tama.kicad_pcb and its schematic tama.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rough-rat before reusing the design.

cr1tbit/pilkbrain
The schematic is still a bit messy, just for the reference for now.


cUDGk/vrc-fbt-hardware
VRChat向けフルボディトラッキング基板 — ハブ+デイジーチェーン端末・数と位置を自由に変更可能・KiCad/OpenSCAD一式

indoor-industry/Mercurio-RevB
A project for a functioning handheld LoRa+GPS radio device

alvestav/alvestav-lee-thesis-project-2025
This is the GitHub repository for the thesis project in computer and electronics engineering by Alvestav and Lee

Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake

