
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

London-Underground-PCB map for metro
London Underground PCB is an open-source printed circuit board by funvill, from the funvill/London-Underground-PCB repository on GitHub. It is a 2-layer board of 312 × 208 mm with 718 parts on 593 nets, routed with 3,487 tracks and 634 vias.
It is built around the TS-1187A-B-A-B. Its parts include 569 diodes, 6 resistors, 4 switches and 1 IC. It belongs with the RP2040 boards of this library.
A decorative PCB with 600 individually addressable RGB LEDs arranged in the London Underground map layout. Animated trains travel along each tube line using official TfL line colors.
PCB Preview via kicanvas

See Washington Metro PCB for a previous example.
Made by: Steven (@funvill)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 569 | XL-1615RGBC-WS2812B | JLCPCB-C5349954:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B-1 | LED1, LED10, LED11, LED100, LED101, LED102, LED103, LED104, LED105, LED106, LED107, LED108, LED109, LED110, LED111, LED112 +553 |
| 63 | Graphics | , , , , , , , , , , , , , , , +47 | |
| 60 | 10uF,10V,X5R | Capacitor_SMD:C_0402_1005Metric | ROW1, ROW2, ROW10, ROW11, ROW12, ROW13, ROW14, ROW15, ROW16, ROW17, ROW18, ROW19, ROW20, ROW21, ROW22, ROW23 +44 |
| 11 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | +5V1, +5V2, +5V3, +5V4, +5V5, +5V6, +5V7, +5V8, GND1, LED_IN1, LED_OUT1 |
| 6 | 1206W4F0000T5E | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | TS-1187A-B-A-B | JLCPCB-C318884:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3, SW4 |
| 1 | XIAO-RP2040-DIP | Seeed Studio XIAO:XIAO-RP2040-SMD | U1 |

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

loopj/wavephoenix
Open-source implementation of the Nintendo WaveBird receiver using Silicon Labs Wireless Gecko SoCs

jackw01/scanlight
A better light source for scanning color negative film

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!



FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware

maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board
It measures 312 × 208 mm and has 2 copper layers, 1.6 mm thick.
718 parts, built around the TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the funvill/London-Underground-PCB repository on GitHub, at the commit this page was made from: the board is hardware/london-underground-pcb.kicad_pcb and its schematic hardware/london-underground-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask funvill before reusing the design.