Skip to the content
4 layers70 × 70 mmAi camera, the printed circuit board in 3D

Tokay AI Camera - ESP32 camera development board

Size
70 × 70 mm
Copper layers
4
Thickness
1.6 mm
Parts
161
Nets
94
Pads
482
Tracks, vias
1,351, 340
Pours
14
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 Jun 2023
Updated
23 Jun 2024

Overview

Ai camera is an open-source printed circuit board by maxlab-io, from the maxlab-io/tokay-lite-pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 70 × 70 mm with 161 parts on 94 nets, routed with 1,351 tracks and 340 vias.

It is built around the ESP32-S3-WROOM-1-N16R8, AP1511B and APDS-9306-065, with the MT9284-28J, BS612 and SY8089AAAC among its other parts. Its parts include 41 capacitors, 30 resistors, 15 diodes, 13 ICs and 8 transistors. It belongs with the microcontroller boards boards and the ESP32 and RISC-V boards of this library.

Main components

12

README

README.md

Tokay Lite: Low Power ESP32 Edge AI Camera

Tokay Lite is the ESP32 camera development board ideal for low-power image processing applications on the edge.

Tokay Lite can be used as standalone devkit to aid developers with a convinient tool or be embedded in the bigger system to augument it with the vision and image processing data.

Tokay Lite Features

  • ESP32-S3 chip compatible with TensorFlow Lite, enabling AI right in the device.
  • OV2640 camera sensor delivering 15 fps @ 2MP.
  • Ultra-low power design: programmable external RTC controls the entire power distribution, allowing the device to consume microamps during sleep.
  • Motion detection with wake-up support.
  • Nightvision mode with software-controlled IR filter to improve pictures during daytime.
  • 10 IR LEDs to illuminate the scene.
  • Ambient light sensor to intelligently select between day and night-time modes.
  • Convenient 70mm x 70mm form factor.
  • Embedded lithium battery charger and JST-PH battery connector.

PCB Dimensions

Tokay LITE is packed into 70x70mm with M3 mounting holes at each corner, as can be seen from a following drawing:

Tokay AI Camera dimensions

Firmware

The Tokay AI Camera is powered by the ESP-IDF framework.

Check the GitHub firmware repository [blocked] for the source code or the camera documentation page for more information on how to build an flash the firmware.

KiCAD Dependencies

The Tokay PCB is made using KiML, the atomic components library from MAXLAB.

If you wish to modify the schematics or PCB you need to install KiML first. Proceed to the KiML installation guide for further information.

Ordering Samples

For information about ordering samples please proceed to MAXLAB Tokay Lite product page.

License

The project is licensed under the CERN Open Hardware Licence Version 2 - Permissive terms.

Business Inquiries or Questions

If you have the camera-related questions or inquiries, please drop us an email on hi@maxlab.io or send us a message trough the Contact Us form.

Other Links

Parts

161
QtyValueFootprintReferences
30TPTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +14
17100n_0402_CL05B104KB54PNCCapacitor_SMD:C_0402_1005MetricC2, C3, C10, C14, C16, C17, C18, C21, C30, C31, C32, C36, C37, C39, C40, C41 +1
1510u_0603_CL10A106MA8NRNCCapacitor_SMD:C_0603_1608MetricC1, C5, C6, C7, C15, C19, C20, C22, C23, C24, C27, C29, C34, C35, C38
12215k_0402_0402WGD2153TCEResistor_SMD:R_0402_1005MetricR5, R10, R12, R13, R15, R16, R18, R20, R21, R22, R28, R29
910k_0402_0402WGF1002TCEResistor_SMD:R_0402_1005MetricR6, R7, R8, R9, R11, R23, R24, R25, R26
80603_IR_850nm_E6C0603IRAC1UDALED_SMD:LED_0603_1608MetricD8, D9, D10, D11, D12, D13, D14, D15
722u_0805_CL21A226MAQNNNECapacitor_SMD:C_0805_2012MetricC4, C9, C12, C13, C25, C26, C28
5976k_0402_0402WGD9763TCEResistor_SMD:R_0402_1005MetricR1, R2, R14, R17, R19
5AO3400APackage_TO_SOT_SMD:SOT-23Q2, Q3, Q5, Q7, Q8
4B5819W-SL_SOD-123Diode_SMD:D_SOD-123D1, D2, D5, D7
4M3MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1, H2, H3, H4
31k_0402_0402WGF1001TCEResistor_SMD:R_0402_1005MetricR3, R4, R27
3AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q4, Q6
20603_RED_KT-0603RLED_SMD:LED_0603_1608MetricD3, D6
210u_SWPA4030S100MT00-kiml-inductor-smd:L_Sunlord_SWPA40xxSL2, L3
21M_3362P-1-10500-kiml-potentiometer-tht:Potentiometer_Vishay_T73YP_VerticalRV1, RV2
222p_0402_0402CG220J500NTCapacitor_SMD:C_0402_1005MetricC11, C33
2SW_PB_90deg_K2-1102AQ-H4CW-0100-kiml-button-switch-tht:SW_PB_90deg_K2-1102AQ-H4CW-01SW1, SW4
2SW_PB_TS-1187A-B-A-BButton_Switch_SMD:SW_SPST_TL3342SW2, SW3
2XC6206-2.8VPackage_TO_SOT_SMD:SOT-23U4, U8
10603_GREEN_19-217/GHC-YR1S2/3TLED_SMD:LED_0603_1608MetricD4
10805_FB_220R@100MHz_BLM21PG221SN1DInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
12.5R_0805_AR05FTCW2R50Resistor_SMD:R_0805_2012MetricR30
132.768kHz_Q13FC1350000400Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1AP1511BPackage_TO_SOT_SMD:SOT-23-6U10
1APDS-9306-06500-kiml-optical:Broadcom_DFN-6_2x2mm_P0.65mmU13
1CUT_PIRJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1CUT_USBJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1Conn-01x02_P1.25mm_10114829-10102LF00-kiml-connector-amphenol:10114829-10102LFJ5
1Conn-01x02_P2mm_NONAME_JST-PH_C4764700-kiml-connector-jst:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1Conn-02x10_P2.54mm_B-2100S20P-B110Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ4
1Conn_01x24_FFC_0.5mm_hirose_FH12-24S-0.5SH00-kiml-connector-fpc-ffc:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_HorizontalJ6
1DBGConnector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_VerticalJ3
1ESP32-S3-WROOM-1-N16R800-kiml-rf-module:ESP32-S3-WROOM-1U11
1LOGO00-kiml-maxlab-logos:maxlab_logo_full_25mmG***
1MT9284-28JPackage_TO_SOT_SMD:SOT-23-6U12
1PCF8563T/5,518Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1PIR_BS61200-kiml-optical:BS612U5
1RT9166-12GVLPackage_TO_SOT_SMD:SOT-23U9
1SOT-23-6_SN74LVC1G373DBVR_TIPackage_TO_SOT_SMD:SOT-23-6U7
1SRV05-4Package_TO_SOT_SMD:SOT-23-6U1
1SY8089AAACPackage_TO_SOT_SMD:SOT-23-5U6
1TP4057-42-SOT26-RPackage_TO_SOT_SMD:SOT-23-6U2
1USB_B_Micro_10118194-0001LF00-kiml-connector-usb:USB_Micro-B_Amphenol_10118194_HorizontalJ2

The 160 most common of 161 parts.

Similar boards

  • 4 layers70 × 70 mmMaxlab io tokay lite pcb ai camera, the printed circuit board in 3D

    Maxlab io tokay lite pcb ai camera

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    176 parts1
  • 4 layers100 × 100 mmLabathome pcb, the printed circuit board in 3D

    Labathome pcb

    klaus-liebler/labathome

    Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.

    292 parts5MIT
  • 4 layers64.1 × 72.8 mmBeeFASYER SPARROW, the printed circuit board in 3D

    BeeFASYER SPARROW

    beewarden/BeeFASYER_SPARROW

    Each BEEFASYER monitoring network is centered on exactly one Sparrow.

    142 parts1CERN-OHL-S-2.0
  • 2 layers170 × 120 mmMotor pid, the printed circuit board in 3D

    Motor pid

    gallicchio/motor-pid

    The motor-position feedback loop of Learning the Art of Electronics (Hayes & Horowitz), Lab 10L, as a 170 x 120 mm printed circuit board whose silkscreen is the schematic.

    110 parts
  • 2 layers100.5 × 52 mmGuitar Pedal, the printed circuit board in 3D

    Guitar Pedal

    he1ias/programmable-guitar-pedal

    A programmable acoustic guitar pedal that doubles as a wireless instrument recording device.

    19 parts
  • 2 layers60 × 45 mmPir, the printed circuit board in 3D

    Pir

    TheCacophonyProject/spool-pcb

    23 partsCERN-OHL-W-2.0
  • 4 layers61.1 × 28 mmPeripheral Board, the printed circuit board in 3D

    Peripheral Board

    SunnyYoshimitsu/SideKick

    WIP, FPGA Based Phone

    31 partsGPL-3.0

Questions

How big is the Ai camera PCB?

It measures 70 × 70 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Ai camera use?

161 parts, built around the ESP32-S3-WROOM-1-N16R8, AP1511B, APDS-9306-065 and MT9284-28J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ai camera KiCad files?

From the maxlab-io/tokay-lite-pcb repository on GitHub, at the commit this page was made from: the board is ai-camera-rev0/ai-camera.kicad_pcb and its schematic ai-camera-rev0/ai-camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ai camera design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).