
Maxlab io tokay lite pcb ai camera
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

Each BEEFASYER monitoring network is centered on exactly one Sparrow.
BeeFASYER SPARROW is an open-source printed circuit board by beewarden, from the beewarden/BeeFASYER_SPARROW repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 64.1 × 72.8 mm with 142 parts on 161 nets, routed with 1,161 tracks and 387 vias.
It is built around the ESP32-C6-MINI-1U-H4, TPS62903RPJR and TF-01A, with the BQ25798RQMR, TPS25730DREFR and USBLC6-2SC6 among its other parts. Its parts include 58 capacitors, 33 resistors, 7 connectors, 6 ICs and 5 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Sparrow is the concentrator and gateway board for the BEEFASYER apiary-monitoring hardware platform. It collects data from Bluebird, Crane, and other compatible sensor boards, then forwards that data to the Beeforesight software platform over Wi-Fi or LTE-M using MQTT and ChirpStack.
Each BEEFASYER monitoring network is centered on exactly one Sparrow.
[!IMPORTANT] This project includes power electronics, battery charging, USB Power Delivery, and solar input circuitry. Observe the electrical and thermal limits described in this document before connecting batteries, power supplies, or external modules. Project is in alpha public testing.
The BEEFASYER hardware family consists of three main boards:
| Board | Role | Primary connectivity |
|---|---|---|
| Sparrow | Apiary concentrator and gateway | Wi-Fi, BLE, LoRaWAN, optional LTE-M |
| Bluebird | In-hive environmental sensor | BLE |
| Crane | External environmental and hive-weight sensor | LoRa and BLE |
Together, these boards form one monitoring network per apiary and feed the Beeforesight software platform.
flowchart LR
B[Bluebird<br>In-hive sensor] -->|BLE| S[Sparrow<br>Gateway]
C[Crane<br>External sensor] -->|LoRa / BLE| S
X[Additional boards] --> S
S -->|Wi-Fi or LTE-M<br>MQTT / ChirpStack| F[Beeforesight]
F --> I[(InfluxDB)]
F --> P[(PostgreSQL)]Sparrow is built around the ESP32-C6, a RISC-V system-on-chip with Wi-Fi, BLE, and IEEE 802.15.4 connectivity.
The ESP32-C6 contains:
The low-power core can wake every 30 seconds to listen for interrupts and monitor power-related conditions. Sleep and wake schedules are configurable in firmware.
An MCP23017 I²C GPIO expander provides 16 additional GPIO lines for functions such as status LEDs and external controls.
Sparrow can communicate directly with Bluebird and Crane boards and can maintain up to 32 BLE connections. With the optional WM1302 module installed, it also operates as a multi-channel LoRaWAN concentrator.
Collected data is published to the server through MQTT, using ChirpStack where applicable.
Sparrow's power system is based on the following devices:
| Component | Purpose |
|---|---|
| BQ25798 | I²C-controlled 1–4-cell buck-boost battery charger, MPPT controller, and power-path manager |
| TPS25730D | USB Type-C and USB Power Delivery controller |
| TPS62903 | Wide-input synchronous step-down converter for the system logic rail |
Sparrow supports two main power sources:
The USB input can negotiate a contract of up to 20 V / 4 A through the TPS25730D.
The solar input supports a nominal 24 V panel and uses the BQ25798's MPPT functionality. It can also be used with another external device that provides a stable supply.
The BQ25798 input charging current is currently limited to 2 A.
Although the limit can be increased in firmware, it must not be raised until the battery connector has been redesigned. The existing connector is the primary 2 A bottleneck.
[!WARNING] At a 2 A charging current, the charger can exceed 70 °C and may thermally throttle unless an appropriate metal heat spreader is installed.
The BQ25798 drives the main VSYS rail at approximately battery voltage. VSYS is software-adjustable, but settings below 3.5 V may cause system problems.
The TPS62903 converts the battery voltage to the logic rail used by the rest of the board.
One firmware-configurable output remains powered even when the main system is off. It can be used to supply another board or an external low-power device.
Supported battery chemistries include:
The BQ25798 PROG pin is configured for a 1S battery by default. Higher-voltage battery packs require the charge voltage to be changed through the appropriate PROG resistor or charger register configuration.
| Pack | Status | Notes |
|---|---|---|
| 1S | Default | Matches the default PROG configuration |
| 2S | Supported with configuration | Charge-voltage settings must be updated |
| 3S | Supported in principle | Within the TPS62903 input range |
| 4S | Marginal / not recommended | A fully charged pack reaches 16.8 V, close to the converter's approximate 17 V input limit |
[!CAUTION] Treat 4S operation as conditional and electrically marginal. Component tolerances, transients, and supply conditions may exceed the converter's safe input range.
Sparrow provides two mPCIe-format expansion slots.
The inward-facing slot is intended for the Seeed WM1302 LoRaWAN concentrator.
The WM1302 is based on the Semtech SX1302 and provides multi-channel reception, allowing Sparrow to operate as a true LoRaWAN gateway. It can communicate with LoRa nodes such as RAK4631-based devices.
The outward-facing slot is intended for the Quectel BG95-M3.
The BG95-M3 supports:
Its primary purpose on Sparrow is LTE-M backhaul when Wi-Fi is unavailable.
An external control surface connects through a 9-pin JST-SH connector and may include:
These parts may be sourced as standard off-the-shelf modules.
[!NOTE] The SH1106 is similar to the SSD1306, but it uses a different display-memory column offset. SSD1306 drivers may require adjustment.
A typical deployment uses Bluebird boards inside hives, Crane boards outside hives, and one Sparrow as the apiary gateway.
Sparrow is programmed through its internal USB JTAG interface.
Repository-specific build, flash, configuration, and provisioning instructions should be documented alongside the firmware source as the software layout stabilizes.
| Component | Function |
|---|---|
| ESP32-C6 | Main RISC-V MCU with Wi-Fi 6, BLE, and IEEE 802.15.4 |
| MCP23017 | 16-bit I²C GPIO expander |
| BQ25798 | Buck-boost battery charger, power-path manager, and MPPT controller |
| TPS25730D | USB Type-C / USB Power Delivery controller |
| TPS62903 | Wide-input synchronous buck converter |
| WM1302 | SX1302-based multi-channel LoRaWAN concentrator |
| BG95-M3 | LTE-M, NB-IoT, EGPRS, and GNSS module |
| SH1106 | 128 × 64 monochrome OLED controller |
| EC11 | Rotary encoder with push-button function |
Before powering the board:
BEEFASYER Sparrow is an actively developed hardware platform. Electrical limits, firmware behavior, interfaces, and supported configurations may change as the design is validated and revised.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10uF | PCM_JLCPCB:C_0805 | C12, C16, C17, C22, C23, C26, C27, C28, C32, C33, C34, C35, C36 |
| 8 | 100nF | PCM_JLCPCB:C_0603 | C14, C15, C18, C25, C31, C37, C40, C47 |
| 6 | 100nF | PCM_JLCPCB:C_0402 | C43, C44, C46, C49, C56, C58 |
| 6 | 10kΩ | PCM_JLCPCB:R_0402 | R9, R18, R28, R29, R30, R31 |
| 5 | 100uF | PCM_JLCPCB:C_1206 | C50, C51, C52, C53, C54 |
| 5 | 22uF | PCM_JLCPCB:C_0805 | C10, C11, C38, C39, C45 |
| 5 | CSD17581Q3AT | footprints:CSD17581Q3A | Q1, Q2, Q3, Q4, Q5 |
| 4 | 10nF | PCM_JLCPCB:C_0402 | C2, C3, C4, C5 |
| 3 | 22uF | PCM_JLCPCB:C_0603 | C55, C57, C59 |
| 3 | 47nF | PCM_JLCPCB:C_0603 | C19, C20, C24 |
| 3 | 82kΩ | PCM_JLCPCB:R_0402 | R1, R3, R8 |
| 2 | 100kΩ | PCM_JLCPCB:R_0402 | R6, R21 |
| 2 | 100Ω | PCM_JLCPCB:R_0402 | R22, R33 |
| 2 | 10uF | PCM_JLCPCB:C_0402 | C8, C9 |
| 2 | 1kΩ | PCM_JLCPCB:R_0402 | R5, R7 |
| 2 | 1uF | PCM_JLCPCB:C_0402 | C41, C42 |
| 2 | 20kΩ | PCM_JLCPCB:R_0402 | R4, R20 |
| 2 | 294 | footprints:RESC1608X55N | R13, R14 |
| 2 | 330pF | PCM_JLCPCB:C_0402 | C6, C7 |
| 2 | 4.7kΩ | PCM_JLCPCB:R_0402 | R25, R26 |
| 2 | 4.7uF | PCM_JLCPCB:C_0402 | C21, C48 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R10, R11 |
| 2 | BZT52C12 | PCM_JLCPCB:D_SOD-123 | D1, D2 |
| 2 | K2-1102AQ-H4CW-01 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1, SW2 |
| 2 | KF128-5.08-2P-AA | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J5 |
| 1 | 0Ω | PCM_JLCPCB:R_1206 | R32 |
| 1 | 0Ω | PCM_JLCPCB:R_0402 | R27 |
| 1 | 1.0uH | footprints:IND_SPM6530T-1R0M120 | L1 |
| 1 | 1uH | footprints:INDC2520X120N | L2 |
| 1 | 2.2kΩ | PCM_JLCPCB:R_0402 | R19 |
| 1 | 2.2uF | PCM_JLCPCB:C_0805 | C13 |
| 1 | 26.1k | PCM_JLCPCB:R_0603 | R23 |
| 1 | 270kΩ | PCM_JLCPCB:R_0603 | R24 |
| 1 | 2Ω | PCM_JLCPCB:R_0603 | R12 |
| 1 | 30.1k | PCM_JLCPCB:R_0402 | R17 |
| 1 | 33uF | Capacitor_Tantalum_SMD:CP_EIA-7343-20_Kemet-V | C29 |
| 1 | 3V3 VOLTAGE | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | 3kΩ | PCM_JLCPCB:R_0603 | R15 |
| 1 | 4.7uF | PCM_JLCPCB:C_1206 | C1 |
| 1 | 4.99kΩ | PCM_JLCPCB:R_0402 | R2 |
| 1 | 5.23k | PCM_JLCPCB:R_0402 | R16 |
| 1 | BAT_VOLTAGE | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | BM09B-SRSS-TB_LF__SN_ | footprints_folder:JST_BM09B-SRSS-TB_LF__SN_ | CONN_1 |
| 1 | BOT_LEFT | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H6 |
| 1 | BOT_RIGHT | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H5 |
| 1 | BQ25798RQMR | BEEF_SPARROW:QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR | U4 |
| 1 | BQ_INT | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | CAP_MIS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | CE | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | ESP32-C6-MINI-1/U | BEEF_SPARROW:WIFIM-SMD_61P-L13.2-W12.5-P0.80 | U7 |
| 1 | FAULT_IN | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | HEADER | BEEF_SPARROW:CONN_PZ254V-11-04P_XFC | CONN_2 |
| 1 | JUMPER_TERMISTOR | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | LOGO | footprints_folder:beefasyer_logo_ver7 | G*** |
| 1 | LORA_ANT | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H3 |
| 1 | LORA_TOP | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H2 |
| 1 | MCP23017-E_SO | footprints:SOIC127P1030X265-28N | U6 |
| 1 | PCIE-52P90H | BEEF_SPARROW:BUS_PCI_Express_Mini_Full | J6 |
| 1 | PCIE-52P90H | BEEF_SPARROW:PCIE-SMD_PCIE-52P90H | J7 |
| 1 | PLUG_EVENT | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | PMID | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | QON | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | Red | PCM_JLCPCB:D_0603 | D3 |
| 1 | SINK_EN | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | S_VOLTAGE | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | TF-01A | footprints:TF-01A | MICRO_SD1 |
| 1 | TOP_LEFT | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1 |
| 1 | TOP_RIGHT | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H4 |
| 1 | TPS25730DREFR | BEEF_SPARROW:QFN-38_L6.0-W4.0-P0.40-TL-EP_RJK | IC1 |
| 1 | TPS62903RPJR | BEEF_SPARROW:VQFN-HR-9_L2.0-W1.5-P0.50-TL | U3 |
| 1 | TS | footprints:CONN_PZ254V-11-02P_02P_XFC | J3 |
| 1 | TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_VBUS | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | VSYS | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | White | PCM_JLCPCB:D_0603 | D4 |
| 1 | ~ | footprints_folder:SW-TH_SK12D07VG4 | SW3 |

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

BenjaminM25/UiActuatorProject
Closed-loop BLDC linear-actuator with custom pcb (STM32G4, DRV8316) — UiA bachelor project

nikolaus018/garageDoor-pro
ESP32-C3 + GPS board that opens the garage door when you leave and arrive: firmware, KiCad PCB and perfboard build

maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board



enkhbold470/pd-brick
USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.

jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
It measures 64.1 × 72.8 mm and has 4 copper layers, 1.61 mm thick.
142 parts, built around the ESP32-C6-MINI-1U-H4, TPS62903RPJR, TF-01A and BQ25798RQMR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the beewarden/BeeFASYER_SPARROW repository on GitHub, at the commit this page was made from: the board is kicad_files/beefasyer_sparrow.kicad_pcb and its schematic kicad_files/SIM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).