
Insert Coin Business Card
PowerPlane/insert-coin
The "Insert Coin" cards are PCB-as-business-card builds where the coin cell is the user interaction: slide it into the holder and the card boots, blinks, listens, taps NFC, then sleeps.

Batteryless Formula 1-inspired NFC PCB with energy harvesting, ATtiny1616 and charlieplexed LED lighting, designed in KiCad.
Card nfc is an open-source printed circuit board by frewden, from the frewden/F1-NFC-Powered-PCB repository on GitHub. It is a 2-layer board of 76 × 56 mm with 33 parts on 34 nets, routed with 226 tracks and 38 vias.
It is built around the ATTINY1616-SN and ST25DV04K-IER8C3. Its parts include 12 resistors, 10 diodes, 4 capacitors, 2 ICs and 1 inductor. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 330 | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R11, R12, R13, R14, R16, R17 |
| 10 | LED | LED_SMD:LED_0402_1005Metric | D3, D4, D5, D6, D9, D10, D11, D12, D14, D15 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | ATtiny1616-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | DNP_C0G_TUNE | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | LOGO | LOGO | G*** |
| 1 | PCB_NFC_6T | CardNFC:NFC_Loop_6T | L1 |
| 1 | ST25DV04K-IER8C3 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U2 |
| 1 | UPDI | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | VCC_SENSE | TestPoint:TestPoint_Pad_D1.5mm | TP2 |

PowerPlane/insert-coin
The "Insert Coin" cards are PCB-as-business-card builds where the coin cell is the user interaction: slide it into the holder and the card boots, blinks, listens, taps NFC, then sleeps.


haohaohaoyan/pcb-badge
An RP2350A devboard and NFC card in the exact same footprint as my county's school-mandated ID badges. This was supposed to work with them but I suspect the cards are actually low-frequency and those are harder to…

nilaynagh8-del/Customizable-PCB-Badge
This is a custom PCB badge that you can change the details of through to be displayed on an e-ink display. It also has a customizable NFC tag

SANJEEV306/pcb_business_card
A NFC business card with ST25DV NFC/RFID tag IC. ST25DV works with 13.5 MHz spiral coil in 2.54 mm thickness 2 layer PCB board.

wrickert/NFCBusiness
Using NFC to create a PCB business card that does not need a battery

CmdrZin/chips_avr_examples
AVR assembly and C code for robotics and other projects.

It measures 76 × 56 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the ATTINY1616-SN and ST25DV04K-IER8C3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the frewden/F1-NFC-Powered-PCB repository on GitHub, at the commit this page was made from: the board is NFC PCB/Hardware/card_nfc.kicad_pcb and its schematic NFC PCB/Hardware/card_nfc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask frewden before reusing the design.