Skip to the content
2 layers54.5 × 85 mmPcbcard, the printed circuit board in 3D

An RP2350A devboard and NFC card in the exact same footprint as my county's school-mandated ID badges. This was supposed to work with them but I suspect the cards are actually low-frequency and those are harder to…

Size
54.5 × 85 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
65
Pads
250
Tracks, vias
384, 75
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
18 Aug 2026
Updated
21 Aug 2026

Overview

Pcbcard is an open-source printed circuit board by haohaohaoyan, from the haohaohaoyan/pcb-badge repository on GitHub. It is a 2-layer board of 54.5 × 85 mm with 59 parts on 65 nets, routed with 384 tracks and 75 vias.

It is built around the RP2350A, W25Q16JVUXIQ and ST25DV04K-IER8C3, with the USBLC6-2SC6 and SK6812MINI-E among its other parts. Its parts include 20 capacitors, 11 resistors, 6 switches, 5 ICs and 4 diodes. It belongs with the RP2350 boards of this library.

Main components

5

README

README.md

personal PCB badge

An RP2350A devboard and NFC card in the exact same footprint as my county's school-mandated ID badges. This was supposed to work with them but I suspect the cards are actually low-frequency and those are harder to develop for, so I'll put that functionality aside for now. This is something I could carry around as a mark of my own work, plus something cool to use when it's really necessary (making my friends' mice jitter)

Features:

  • 4mm diameter hole for a lanyard
  • 13 exposed GPIO pins (GPIO0 - GPIO7, GPIO17 - GPIO25), plus +5V, +3V3, and a ground.
  • 16MB or 8MB flash (must be SPI NOR flash and USON-8 packaging)
  • 4 buttons (GPIO8 - GPIO11, pulled down when closed)
  • 4 daisy-chained Neopixels (GPIO12)
  • I2C controlled NFC
  • Self-documentation on back

Schematic

Schematic image

PCB

No silkscreen: PCB image With silkscreen: PCB with silkscreen

No case because it's intended to either slip into a lanyard card holder or go without one!

BOM (generated from CSV)

DesignatorFootprintQuantityValueLCSC Part #
C1, C10, C11, C12, C13, C14, C16, C18, C7, C8, C90603110.1uFC14663
C15, C17, C20, C4060344.7uFC19666
C19060311pFC37117
C2, C30603233pFC1663
C5, C6060321uFC15849
D1, D2, D3, D4SK6812MINI-E_fixed4SK6812MINI-EC5149201
J1USB_C_Receptacle_G-Switch_GT-USB-7010ASV1USB_C_Receptacle_USB2.0_14PC2988369
L2IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T13.3uHC42411119
R1, R2060325.1kC23186
R10, R11060321kC21190
R3, R6060324.7kC23162
R4, R50603210kC25804
R7, R80603227C25190
R90603133C23140
SW1, SW2SW-SMD_L3.9-W3.0-P4.45 C4552802SW_PushC455280
SW3SW-SMD_L3.9-W3.0-P4.45 C45528011C455280
SW4SW-SMD_L3.9-W3.0-P4.45 C45528012C455280
SW5SW-SMD_L3.9-W3.0-P4.45 C45528013C455280
SW6SW-SMD_L3.9-W3.0-P4.45 C45528014C455280
U1DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm1ST25DV04K-IER8C3C2654866
U2QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm_ThermalVias1RP2350AC42411118
U3SOT-23-61USBLC6-2SC6C7519
U4SOT-231MCP1700x-330xxTTC39051
U5Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm1W25Q16JVUXIQC2843335Z
Y1Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering112MHzC9002

Parts

59
QtyValueFootprintReferences
110.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C7, C8, C9, C10, C11, C12, C13, C14, C16, C18
44.7uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4, C15, C17, C20
4LOGOLOGOG***, G***, G***, G***
4SK6812MINI-Elib:SK6812MINI-E_fixedD1, D2, D3, D4
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R5
21kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR10, R11
21uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6
227Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R8
233pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3
24.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R6
25.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ2, J3
2SW_Pushlib:SW-SMD_L3.9-W3.0-P4.45 C455280SW1, SW2
11lib:SW-SMD_L3.9-W3.0-P4.45 C455280SW3
112MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1
11pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC19
12lib:SW-SMD_L3.9-W3.0-P4.45 C455280SW4
13lib:SW-SMD_L3.9-W3.0-P4.45 C455280SW5
13.3uHlib:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-TL2
133Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9
14lib:SW-SMD_L3.9-W3.0-P4.45 C455280SW6
1MCP1700x-330xxTTPackage_TO_SOT_SMD:SOT-23U4
1MountingHoleMountingHole:MountingHole_5mmH1
1NFClib:antgenL1
1RP2350APackage_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm_ThermalViasU2
1ST25DV04K-IER8C3Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mmU1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1
1W25Q16JVUXIQPackage_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mmU5

The 57 most common of 59 parts.

Similar boards

  • 6 layers113.7 × 61.3 mmCustom PCB Badge, the printed circuit board in 3D

    Custom PCB Badge

    nilaynagh8-del/Customizable-PCB-Badge

    This is a custom PCB badge that you can change the details of through to be displayed on an e-ink display. It also has a customizable NFC tag

    110 partsMIT
  • 6 layers28 × 63 mmComms, the printed circuit board in 3D

    Comms

    sequoia-hope/robot-link

    RP2350A + ST60A3H1 60 GHz contactless link dev board (KiCad, generated)

    100 parts
  • 2 layers88.9 × 50.8 mmInsert Coin Business Card, the printed circuit board in 3D

    Insert Coin Business Card

    PowerPlane/insert-coin

    The "Insert Coin" cards are PCB-as-business-card builds where the coin cell is the user interaction: slide it into the holder and the card boots, blinks, listens, taps NFC, then sleeps.

    44 parts1
  • 2 layers76 × 56 mmCard nfc, the printed circuit board in 3D

    Card nfc

    frewden/F1-NFC-Powered-PCB

    Batteryless Formula 1-inspired NFC PCB with energy harvesting, ATtiny1616 and charlieplexed LED lighting, designed in KiCad.

    33 parts
  • 2 layers93 × 53 mm05 Project, the printed circuit board in 3D

    05 Project

    SANJEEV306/pcb_business_card

    A NFC business card with ST25DV NFC/RFID tag IC. ST25DV works with 13.5 MHz spiral coil in 2.54 mm thickness 2 layer PCB board.

    7 parts
  • 2 layers87.6 × 49.5 mmNFCBuisnessV3, the printed circuit board in 3D

    NFCBuisnessV3

    wrickert/NFCBusiness

    Using NFC to create a PCB business card that does not need a battery

    21 parts4
  • 2 layers69.1 × 53.8 mmCybdoDuino, the printed circuit board in 3D

    CybdoDuino

    Cybdo/CybdoDuino

    I have so many old Arduino-based projects, including a CNC plotter I made with old CD drives (see here), that could do with a refresh.

    71 parts2MIT

Questions

How big is the Pcbcard PCB?

It measures 54.5 × 85 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcbcard use?

59 parts, built around the RP2350A, W25Q16JVUXIQ, ST25DV04K-IER8C3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcbcard KiCad files?

From the haohaohaoyan/pcb-badge repository on GitHub, at the commit this page was made from: the board is PCB/pcbcard.kicad_pcb and its schematic PCB/pcbcard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcbcard design in my own project?

Its repository states no licence, so its author keeps all rights: ask haohaohaoyan before reusing the design.