

Franzininho tiny841
Repositório para Franzininho Tiny - Uma placa com attiny841 da família Franzinho
- Size
- 29.8 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 22
- Pads
- 76
- Tracks, vias
- 145, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Mar 2019
- Updated
- 8 Mar 2019
Overview
Franzininho tiny841 is an open-source printed circuit board by Franzininho, from the Franzininho/Franzininho-Tiny repository on GitHub. It is a 2-layer board of 29.8 × 20.3 mm with 22 parts on 22 nets, routed with 145 tracks and 6 vias.
It is built around the ATTINY841-SSU and LP2985-50DBV. Its parts include 6 resistors, 5 diodes, 3 connectors, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY841-SSU
SOIC-14-40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LP2985-50DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFranzininho Tiny
Repositório para Franzininho Tiny - Uma placa com attiny841 da família Franzinho
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | Resistors_SMD:R_0603_HandSoldering | R4, R5, R6 |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | 3V6 | Diodes_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 2 | 68R | Resistors_SMD:R_0603_HandSoldering | R2, R3 |
| 2 | Conn_01x08 | library:Pin_Header_Straight_1x08_Pitch2.54mm | J2, J3 |
| 2 | LED | LEDs:LED_0603_HandSoldering | D4, D5 |
| 2 | LOGO | Graphics:GND2 | G***, G*** |
| 1 | 1K5 | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 1N4148 | Diodes_SMD:D_SOD-123F | D3 |
| 1 | ATtiny841-SSU | SMD_Packages:SOIC-14_N | U2 |
| 1 | LOGO | Graphics:FRANZININHO | G*** |
| 1 | LP2985-5.0 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers46 × 38 mm

- 2 layers70 × 40 mm

Scale ltc6915
IoTReady/low-power-nrf52-weighing-scale
https://iotready.co/low-power-nrf52-weighing-scale/
76 parts7 - 4 layers133.4 × 44.3 mm

- 2 layers190.9 × 99.8 mm

- 2 layers43 × 49 mm

- 6 layers460 × 109.3 mm

- 2 layers149.9 × 157.7 mm

- 2 layers17.8 × 45.7 mm

CP2102-breakout
autotel/cp2102-UART-breakout
Breakout board for CP2102 USB to UART bridge, to aid the design of boards using this chip.
28 parts
Questions
How big is the Franzininho tiny841 PCB?
It measures 29.8 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Franzininho tiny841 use?
22 parts, built around the ATTINY841-SSU and LP2985-50DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Franzininho tiny841 KiCad files?
From the Franzininho/Franzininho-Tiny repository on GitHub, at the commit this page was made from: the board is franzininho-tiny841/franzininho-tiny841.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Franzininho tiny841 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Franzininho before reusing the design.