Skip to the content
1234567891011121314

ATTINY841-SSU

Microchip TechnologyExtended

-40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY841-SSU
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-14
Pins
14
In stock
53 at JLCPCB (C614879)
Used on
32 open-source boards

Overview

The ATTINY841-SSU is a microcontroller made by Microchip Technology in a SOIC-14 package with 14 pins. -40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny841-SS, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 53 are in stock at JLCPCB (part C614879). 32 open-source boards in 24 repositories on GitHub use it.

Symbol

1VCC2XTAL1/PB03XTAL2/PB14RESET/PB35PB26PA77PA68PA59PA410PA311PA212PA113AREF/PA014GND
MCU_Microchip_ATtiny:ATtiny841-SSFrom KiCad's library

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

Pinout

14
The pins of the ATTINY841-SSU
PinNameType
1VCCPower in
2XTAL1/PB0Input/output
3XTAL2/PB1Input/output
4RESET/PB3Input/output
5PB2Input/output
6PA7Input/output
7PA6Input/output
8PA5Input/output
9PA4Input/output
10PA3Input/output
11PA2Input/output
12PA1Input/output
13AREF/PA0Input/output
14GNDPower in

Open-source boards using it

32See all 32
  • 2 layers33 × 51.6 mmTpms silencer, the printed circuit board in 3D

    Tpms silencer

    gcormier/tpms_silencer

    Spoof TPMS sensors to prevent blinking lights/etc

    27 parts20
  • 2 layersHeadlamp, the printed circuit board in 3D

    Headlamp

    kajusK/Darkstar-Mk.II

    High-power bomb-proof headlamp for caving

    60 parts7
  • 2 layers65 × 56 mmRaspberryPi UPS HAT, the printed circuit board in 3D

    RaspberryPi UPS HAT

    gvoigtlaender/RaspberryPi_UPS_HAT

    RaspberryPi UPS HAT

    63 parts4GPL-3.0
  • 2 layers29.8 × 20.3 mmFranzininho tiny841, the printed circuit board in 3D

    Franzininho tiny841

    Franzininho/Franzininho-Tiny

    Repositório para Franzininho Tiny - Uma placa com attiny841 da família Franzinho

    22 parts3
  • 2 layers65 × 56 mmPi supercap ups, the printed circuit board in 3D

    Pi supercap ups

    mairas/pi-super-ups

    Power Monitor for Raspberry Pi and SignalK

    92 parts2BSD-3-Clause
  • 2 layers26.7 × 20.3 mmIsp, the printed circuit board in 3D

    Isp

    captdam/AVR441ISP

    24 parts1
  • 2 layers49.5 × 49.5 mmPcb workshop sensor, the printed circuit board in 3D

    Pcb workshop sensor

    BarnabyShearer/pcb_workshop_sensor

    Simple lowpower MSP and Temp sensor PCB for a PCB design workshop.

    31 parts
  • 2 layers49.5 × 49.5 mmSignalsignal, the printed circuit board in 3D

    Signalsignal

    BarnabyShearer/signalsignal

    PCB for cheep high-density IO.

    32 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY841-SSU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny841-SS and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY841-SSU?

SOIC-14, with 14 pins. Its footprint is drawn on this page.

Where is the ATTINY841-SSU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY841-SSU?

JLCPCB lists it as part C614879, with 53 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY841-SSU?

Parts like it in the library: the PY32F002BD15S6TU by PUYA, the FT61F022A-RB by FMD, the FT61FC22A-RB by FMD and the PIC16F1503-I/SL by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY841-SSU?

32 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.