Skip to the content
12345

LP2985-50DBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP2985-50DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
17,309 at JLCPCB (C74511)
Used on
24 open-source boards

Overview

The LP2985-50DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LP2985-50DBVR, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 17,309 are in stock at JLCPCB (part C74511). 24 open-source boards in 21 repositories on GitHub use it.

Symbol

1VIN2GND3ON/#OFF4BYPASS5VOUT
EasyEDA_Cloud:LP2985-50DBVRFrom EasyEDA

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

22
Supply, least
2.2 V · VIN, recommended operating, legacy chip, min · p. 4
Supply, most
16 V · VIN, recommended operating, legacy chip, max · p. 4
Supply, least
2.5 V · VIN, recommended operating, new chip, min · p. 4
Supply, most
16 V · VIN, recommended operating, new chip, max · p. 4
Supply, absolute maximum
16 V · VIN, absolute maximum, legacy chip · p. 4
Supply, absolute maximum
18 V · VIN, absolute maximum, new chip · p. 4
Works from
-40 °C · operating ambient temperature, min · p. 16
Works up to
125 °C · operating ambient temperature, max · p. 16
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Gives
150 mA · continuous output current, max · p. 4
Takes working
65 µA · GND pin current, output enabled, IOUT = 0 mA, TJ = 25°C, legacy chip, typical · p. 7
Takes working
69 µA · GND pin current, output enabled, IOUT = 0 mA, TJ = 25°C, new chip, typical · p. 7
Takes asleep
10 nA · shutdown, VON/OFF < 0.3 V, VIN = 16 V, TJ = 25°C, legacy chip, typical · p. 7
Takes asleep
1.25 µA · shutdown, VON/OFF < 0.3 V, VIN = 16 V, TJ = 25°C, new chip, typical · p. 7
Dropout
280 mV · IOUT = 150 mA, TJ = 25°C, legacy chip, typical · p. 6
Dropout
180 mV · IOUT = 150 mA, TJ = 25°C, new chip, typical · p. 6
Junction to air (DBV (SOT23-5))
205.4 K/W · junction to ambient, legacy chip · p. 5
Junction to air (DBV (SOT23-5))
178.6 K/W · junction to ambient, new chip · p. 5
Junction to board (DBV (SOT23-5))
46.7 K/W · junction to board, legacy chip · p. 5
Junction to board (DBV (SOT23-5))
47.2 K/W · junction to board, new chip · p. 5
Junction to case (DBV (SOT23-5))
78.8 K/W · junction to case top, legacy chip · p. 5
Junction to case (DBV (SOT23-5))
77.9 K/W · junction to case top, new chip · p. 5

Open-source boards using it

24See all 24
  • 2 layers46 × 38 mmNode, the printed circuit board in 3D

    Node

    feklee/san

    Self Aware Network

    39 parts8WTFPL
  • 2 layers70 × 40 mmScale ltc6915, the printed circuit board in 3D

    Scale ltc6915

    IoTReady/low-power-nrf52-weighing-scale

    https://iotready.co/low-power-nrf52-weighing-scale/

    76 parts7
  • 4 layers133.4 × 44.3 mmSignalSnagger, the printed circuit board in 3D

    SignalSnagger

    OpenARDF/SignalSnagger

    80m Radio Orienteering Receiver

    207 parts6MIT
  • 2 layers190.9 × 99.8 mmDaisyRoguePanel 3x1, the printed circuit board in 3D

    DaisyRoguePanel 3x1

    robertsonics/DaisyRogue_PCB

    Daisy Rogue PCB KiCad Project

    235 parts6
  • 2 layers29.8 × 20.3 mmFranzininho tiny841, the printed circuit board in 3D

    Franzininho tiny841

    Franzininho/Franzininho-Tiny

    Repositório para Franzininho Tiny - Uma placa com attiny841 da família Franzinho

    22 parts3
  • 6 layers460 × 109.3 mmReadout trenz, the printed circuit board in 3D

    Readout trenz

    Arich-Hardware/PCB

    409 parts1
  • 2 layers149.9 × 157.7 mmDaw00, the printed circuit board in 3D

    Daw00

    mikhalych63/DAW00

    Digital Audio Ware

    246 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2985-50DBV?

Yes. The symbol is EasyEDA_Cloud:LP2985-50DBVR and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2985-50DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP2985-50DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2985-50DBV?

JLCPCB lists it as part C74511, with 17,309 in stock; the sellers' links on this page open their listings.

What can replace the LP2985-50DBV?

Parts like it in the library: the TLV70450DBV by Texas Instruments, the SPX3819M5-L-5-0 by TECH PUBLIC, the LP2985A-50DBV by Texas Instruments and the BL8075CB5TR50 by BL. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP2985-50DBV?

24 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.