2 layers61 × 69.9 mm
2 layers190.9 × 99.8 mm
DaisyRoguePanel 3x1
robertsonics/DaisyRogue_PCB6Daisy Rogue PCB KiCad Project
- Size
- 190.9 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 235
- Nets
- 243
- Pads
- 919
- Tracks, vias
- 1,794, 213
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Mar 2023
- Updated
- 4 Mar 2023
Overview
DaisyRoguePanel 3x1 is an open-source printed circuit board by robertsonics, from the robertsonics/DaisyRogue_PCB repository on GitHub. It is a 2-layer board of 190.9 × 99.8 mm with 235 parts on 243 nets, routed with 1,794 tracks and 213 vias.
It is built around the H11L1S(TA)-V, LM1117-5.0 and LP2985-50DBV, with the USBLC6-2SC6, PJ-059A and USB-A1HSW6 among its other parts. Its parts include 90 capacitors, 69 resistors, 21 ICs, 18 connectors and 3 diodes.
Main components
6
H11L1S(TA)-V
SMD-6P-55℃~+100℃ 1 1.15V 1.6mA 1Mbit/s 250mW 3V~15V 4us 4us 50mA 5kV DC SMD-6P Logic Output Optoisolators ROHSEverlight ElectronicsLogic Output Optoisolators
LM1117-5.0
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
LP2985-50DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
PJ-059A
插件-25℃~+85℃ 2.5A 24V 2mm 5.7mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
USB-A1HSW6
插件0℃~+85℃ 1 1A 30V 4P Female Right Angle Type-A White Plugin USB Connectors ROHSOn-Shore TechUSB Connectors
README
README.mdDaisyRogue_PCB
Daisy Rogue PCB KiCad Project
Parts
235| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 2.2K | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R3, R3, R3, R4, R10, R10, R10, R11, R11, R11, R12, R12, R12 +17 |
| 24 | 22uF | Capacitor_SMD:C_1206_3216Metric | C3, C3, C3, C4, C4, C4, C5, C5, C5, C6, C6, C6, C7, C10, C10, C10 +8 |
| 24 | 3300pF | Capacitor_SMD:C_0603_1608Metric | C11, C11, C11, C12, C12, C12, C13, C13, C13, C14, C14, C14, C15, C15, C15, C16 +8 |
| 12 | 1.0uF | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C20, C20, C20, C21, C21, C21, C23, C23, C23 |
| 12 | 100K | Resistor_SMD:R_0603_1608Metric | R17, R17, R17, R18, R18, R18, R19, R19, R19, R20, R20, R20 |
| 12 | 10K | Resistor_SMD:R_0603_1608Metric | R15, R15, R15, R16, R16, R16, R21, R21, R21, R22, R22, R22 |
| 12 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C22, C22, C22, C27, C27, C27, C30, C30, C30 |
| 12 | MountingHole | MountingHole:MountingHole_2.7mm_Pad_TopBottom | H1, H1, H1, H2, H2, H2, H3, H3, H3, H4, H4, H4 |
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C26, C26, C26, C28, C28, C28, C29, C29, C29 |
| 6 | 0 | Resistor_SMD:R_0603_1608Metric | R13, R13, R13, R23, R23, R23 |
| 6 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C19, C19, C19, C25, C25, C25 |
| 6 | 600R | Inductor_SMD:L_0603_1608Metric | FB1, FB1, FB1, FB2, FB2, FB2 |
| 6 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J1, J1, J1, J2, J2, J2 |
| 3 | 10nF | Capacitor_SMD:C_0603_1608Metric | C24, C24, C24 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R2, R2, R2 |
| 3 | AT25DF256-SSHN-T | AT25DF256-SSHN-T:SOIC127P599X175-8N | U6, U6, U6 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J3, J3 |
| 3 | DNP | Resistor_SMD:R_0603_1608Metric | R14, R14, R14 |
| 3 | D_Schottky | Diode_SMD:D_SOD-323 | D1, D1, D1 |
| 3 | Device_Audio_Electrosmith_Daisy_Seed_Rev4 | Device_Audio_Electrosmith_Daisy_Seed:Device_Audio_Electrosmith_Daisy_Seed | A1, A1, A1 |
| 3 | Fiducial | Fiducial | FD1, FD2, FD3 |
| 3 | H11L1STA | H11L1S:H11L1STA | U2, U2, U2 |
| 3 | LM1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5, U5, U5 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | LP2985-5.0 | Package_TO_SOT_SMD:SOT-23-5 | U4, U4, U4 |
| 3 | MEM2061-01-188-00-A_REVA | MEM2061-01-188-00-A_REVA:MEM2061-01-188-00-A_REVA | J5, J5, J5 |
| 3 | PCM1681TPWPQ1 | PCM1681Q1:PCM1681TPWPQ1 | U3, U3, U3 |
| 3 | PJ-059A | PJ-059A:CUI_PJ-059A | J4, J4, J4 |
| 3 | STMPS2151STR | Package_TO_SOT_SMD:SOT-23-5 | U7, U7, U7 |
| 3 | USB-A1HSW6 | USB-A1HSW6:OST_USB-A1HSW6 | P1, P1, P1 |
| 3 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1, U1, U1 |
The 228 most common of 235 parts.
More from robertsonics/DaisyRogue_PCB
1Similar boards
- 4 layers125 × 50.1 mm
- 2 layers102.4 × 88.6 mm
- 6 layers128 × 117.8 mm
FPGA DevBoard
Benny-Chippers/Enchanted_Rocks
The dev board PCB for the MacroController project
301 partsMIT - 12 layers18 × 52.5 mm
- 2 layers75 × 40 mm
PicoTop Board Rev2
7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
86 parts66 - 2 layers99 × 44.3 mm
USB HUB PCB
Erolctk/CH334R-USB-HUB
a compact 4-port USB 2.0 hub designed in KiCad using the WCH CH334R USB Hub Controller
25 parts1MIT - 2 layers
String Drum Synthesizer
AbhiN30/String-Drum-Synthesizer
Purpose/Requirements: This subsystem must be able to power the processor and the USB keyboard. Capacitors will be used to stabilize the power block.
62 parts - 2 layers
Robot seg
benja47012/Robot-de-seguridad
Robot de seguridad con diversas funciones, planteado con un protocolo I2C.
48 parts
Questions
How big is the DaisyRoguePanel 3x1 PCB?
It measures 190.9 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DaisyRoguePanel 3x1 use?
235 parts, built around the H11L1S(TA)-V, LM1117-5.0, LP2985-50DBV and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DaisyRoguePanel 3x1 KiCad files?
From the robertsonics/DaisyRogue_PCB repository on GitHub, at the commit this page was made from: the board is DaisyRoguePanel_3x1.kicad_pcb and its schematic Audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DaisyRoguePanel 3x1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask robertsonics before reusing the design.