4 layers482.6 × 500 mm
6 layers460 × 109.3 mm
Readout trenz
Arich-Hardware/PCB1- Size
- 460 × 109.3 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 409
- Nets
- 1,165
- Pads
- 2,395
- Tracks, vias
- 4,555, 769
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Feb 2021
- Updated
- 12 Sep 2022
Overview
Readout trenz is an open-source printed circuit board by Arich-Hardware, from the Arich-Hardware/PCB repository on GitHub. It is a 6-layer board of 460 × 109.3 mm with 409 parts on 1,165 nets, routed with 4,555 tracks and 769 vias.
It is built around the ADS7955SDB, DS90LV027AHM and NLSV8T244DT, with the LP2985-50DBV, REF5025ID and ERM8-060-05.0-L-DV-TR among its other parts. Its parts include 184 capacitors, 121 resistors, 23 ICs, 19 connectors and 13 diodes.
Main components
7
ADS7955SDB
TSSOP-30-4.4mm-40℃~+125℃ 0.5LSB 10 1MHz 2.7V~5.25V 60dB 8 Multiplexers Serial port TSSOP-30-4.4mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)
DS90LV027AHM
SOIC-80 2 3V~3.6V 600Mbps Driver Low power standby / automatic shutdown on failure SOIC-8 LVDS ICs ROHSTexas InstrumentsLVDS ICs
NLSV8T244DT
TSSOP-20-40℃~+85℃ 1 8 900mV~4.5V 900mV~4.5V Power-Off Protection、Overvoltage protection Tri-State Unidirectional TSSOP-20 Translators, Level Shifters ROHSonsemiTranslators, Level Shifters
LP2985-50DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsREF5025ID
SOIC-8-40℃~+125℃@(Ta) 1.2mA 10mA 2.5V 2.7V~18V 3ppm/℃ 7.5uVp-p Fixed Series ±0.05% SOIC-8 Voltage Reference ROHSTexas InstrumentsVoltage References
ERM8-060-05.0-L-DV-TR
SMD,P=0.8mm-55℃~+125℃ 0.8mm 1.4A 120P 2 225V Gold Surface Mount,Vertical SMD,P=0.8mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
ASA2-25.000MHZ-L-T
SMD2016-4P-40℃~+85℃ 1.8V 25MHz 5mA HCMOS SMD2016-4P Crystal Oscillators ROHSAbraconCrystal Oscillators
README
hardware/sipm-breakout/README.mdSiPM Breakout board for testing
Parts
409| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C100, C102, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115, C116, C117, C118 +60 |
| 66 | 49.9 | Resistor_SMD:R_0402_1005Metric | R1, R2, R17, R18, R19, R20, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109 +50 |
| 64 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133, C134, C135, C136, C137, C138 +48 |
| 24 | TestPoint | readout_trenz:TestPoint_Pad_30x30mils | TP1, TP2, TP10, TP11, TP12, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24 +8 |
| 14 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R49, R50, R51, R52, R53, R54, R55, R110, R111, R112, R113, R114, R115, R116 |
| 12 | 150pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C77, C79, C80, C82, C85, C86, C163, C165, C166, C168, C171, C172 |
| 12 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R11, R58, R59, R60, R66, R67, R68, R69, R70, R119, R120, R121 |
| 11 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C7, C8, C12, C13, C17, C18, C19, C103, C104, C105 |
| 10 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9, C10, C11, C14, C15, C16, C89, C90, C175, C176 |
| 10 | Red_LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D12 |
| 8 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | GND1, GND2, GND3, GND4, GND5, GND6, GND7, GND8 |
| 7 | 56 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R13, R14, R71, R72, R74, R75 |
| 7 | N-MOSFET | Package_TO_SOT_SMD:SOT-416 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R56, R57, R117, R118 |
| 6 | ERM8-060-05.0-L-DV | readout_trenz:ERM8-060-XX-X-D-RA | J7, J8, J9, J10, J11, J12 |
| 5 | SN74AXC2T45DCTR | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U1, U10, U15, U18, U23 |
| 4 | NLSV8T244 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U11, U12, U19, U20 |
| 3 | 80 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R15, R16 |
| 3 | LT1963AxQ-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U6, U7, U8 |
| 2 | 0.5 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R64, R65 |
| 2 | 100uF | readout_trenz:EEE-0JA101WR_v2 | C182, C184 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R61, R62 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C95, C96 |
| 2 | 4.7uH | readout_trenz:A914BYW-4R7M=P3 | L1, L2 |
| 2 | 470uF | readout_trenz:EEE-0JA471UAP_v2 | C181, C183 |
| 2 | ADS7955 | Package_SO:TSSOP-30_4.4x7.8mm_P0.5mm | U14, U22 |
| 2 | BNC | readout_trenz:lemo-EPB.00.250.NTN | J6, J19 |
| 2 | CITIROC1A | readout_trenz:QFP-160_26x26_Pitch0.65mm | U9, U17 |
| 2 | Conn_Coaxial | readout_trenz:lemo-EPB.00.250.NTN | J1, J2 |
| 2 | DS90LV027A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13, U21 |
| 2 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | MountingHole | readout_trenz:MountingHole_0.11'' | H1, H2 |
| 2 | NCP718xSN180 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U4, U5 |
| 2 | probe | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP13, TP26 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R77 |
| 1 | 0.1 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R63 |
| 1 | 100uF | readout_trenz:EEE-0JA101WR | C180 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4 |
| 1 | 140 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R73 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 470k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7 |
| 1 | 470uF | readout_trenz:EEE-0JA471UAP | C179 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C101 |
| 1 | 900 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9 |
| 1 | ASA2-25.000MHZ | readout_trenz:ASA2-25.000MHZ | X1 |
| 1 | Blue_LED | LED_THT:LED_D3.0mm | D11 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | Conn_02x05_Odd_Even | readout_trenz:10129383-910002ALF | J18 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | Conn_Coaxial_Power | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J3 |
| 1 | DC_TO_DC | readout_trenz:DC_TO_DC | J5 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R76 |
| 1 | Digilent JTAG header | readout_trenz:87832-1420 | J13 |
| 1 | Green_LED | LED_THT:LED_D3.0mm | D13 |
| 1 | LP2985-5.0 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | NTB0102-Q100 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U16 |
| 1 | REF5025 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SparkfunFT232RL | readout_trenz:Sparkfun-FT232RL | J14 |
| 1 | TrenzSFP+cage | Connector:Connector_SFP_and_Cage | J15 |
| 1 | Trenz_Module | readout_trenz:Trenz_Module | J17 |
| 1 | Yellow_LED | LED_THT:LED_D3.0mm | D10 |
More from Arich-Hardware/PCB
6- 2 layers119.4 × 99.1 mm
- 4 layers78.6 × 500 mm
- 2 layers100 × 100 mm
- 4 layers50.8 × 50.8 mm
- 4 layers60 × 60 mm
Similar boards
- 2 layers45 × 45 mm
WolfDrive encoder renishaw adapter
jonblissett/renishaw-aksim-adapters
PCB and schematic designs for adapting Renishaw encoders for different signalling.
18 partsGPL-3.0 - 4 layers100 × 70 mm
SummerSchool 25
konrad-bode/SummerSchool_25
This repository contains the KiCad hardware design for the HeiChips 2025 SummerSchool FPGA Carrier Board, designed to interface with the custom tapeout FPGA chip from the HeiChips 2025 Tapeout Repository.
112 parts - 6 layers69.7 × 37.4 mm
- 2 layers81.1 × 27.6 mm
Esp2400
m24h/esp2400
A digitalizing power supply control board woking with modified ZXD2400 (50V 50A) modoule
110 parts6Apache-2.0 - 4 layers92.5 × 147.5 mm
- 2 layers100.5 × 95.8 mm
ADS1299-test circuit
IIBM/EEG
Circuito, PCB y data sobre el diseño de un dispositivo de adquisición de EEG. Florencia Grosso y Brian Santillán. IIBM FIUBA.
109 parts - 6 layers175 × 150 mm
- 4 layers96.2 × 90 mm
TG SAT 24V0 V1.4
spel-uchile/S2_S3_PS_MAG_PCBs
A summary of the different MAG derived PCBs used in SUCHAI 2, SUCHAI 3 and Plansat Satellites
115 parts
Questions
How big is the Readout trenz PCB?
It measures 460 × 109.3 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Readout trenz use?
409 parts, built around the ADS7955SDB, DS90LV027AHM, NLSV8T244DT and LP2985-50DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Readout trenz KiCad files?
From the Arich-Hardware/PCB repository on GitHub, at the commit this page was made from: the board is hardware/readout_trenz/readout_trenz.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Readout trenz design in my own project?
Its repository states no licence, so its author keeps all rights: ask Arich-Hardware before reusing the design.