Skip to the content
4 layers100 × 70 mmSummerSchool 25, the printed circuit board in 3D

This repository contains the KiCad hardware design for the HeiChips 2025 SummerSchool FPGA Carrier Board, designed to interface with the custom tapeout FPGA chip from the HeiChips 2025 Tapeout Repository.

Size
100 × 70 mm
Copper layers
4
Thickness
1.6 mm
Parts
112
Nets
155
Pads
541
Tracks, vias
1,223, 166
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Nov 2026
Updated
2 Nov 2026

Overview

SummerSchool 25 is an open-source printed circuit board by konrad-bode, from the konrad-bode/SummerSchool_25 repository on GitHub. It is a 4-layer board of 100 × 70 mm with 112 parts on 155 nets, routed with 1,223 tracks and 166 vias.

It is built around the RP2350A, DS90LV027AHM and W25Q32JVSSIQ, with the 74LVC1G66GW, TLV1117-33DCY and PESD5V0L1UL among its other parts. Its parts include 33 resistors, 23 connectors, 21 capacitors, 8 ICs and 7 diodes. It belongs with the RP2350 boards of this library.

Main components

9

README

README.md

HeiChips 2025 SummerSchool – FPGA Carrier Board

This repository contains the KiCad hardware design for the HeiChips 2025 SummerSchool FPGA Carrier Board, designed to interface with the custom tapeout FPGA chip from the HeiChips 2025 Tapeout Repository.


🏗 System Overview

The carrier board interfaces with a custom HeiChips FPGA breakout module via a 70-pin high-density mezzanine connector. An onboard RP2350A microcontroller handles FPGA configuration.


⚡ Key Hardware Features

Onboard Controller & Configuration

  • Microcontroller: RP2350A MCU managing FPGA boot configuration (FPGA_CONFIG_SLOT[0..3]), reset, clocks, and SPI interface.
  • Flash Memory: Dual W25Q32JVSS QSPI Flash ICs (one for RP2350, one for FPGA image storage).
  • Control Switches: 74LVC1G66 analog switch for SPI bus arbitration.

Power Management

  • Input Power: 5V DC input via USB-C
  • System 3.3V: TLV1117-33 LDO supplying 3.3V rail from 5V input for FPGA IO and Microcontroller
  • FPGA Core Supply (VCORE/AVCORE): AP7361C adjustable LDO

Connectors & Peripherals

  • Module Interconnect: 70-pin Amphenol BergStak Mezzanine Receptacle (10164227-0701A1RLF).
  • Expansion: 4x PMOD headers (J20–J23) routing FPGA GPIO0–GPIO31.
  • Video Output: HDMI interface (J18) driven by DS90LV027A LVDS differential line drivers.
  • USB Ports: Dual USB-C connectors (J17 for RP2350 debug/programming, J19 directly connected to FPGA USB with ESD protection).
  • Analog & RF: Coaxial SMA/MCX connectors for IceLab analog pins, internal analog signals, and Pudding I/O lines.
  • Ethernet: 3-pin Ethernet header (J8).

TODO

  • HDMI differential pair length matching and impedance tuning.
  • Project selection per jumper
  • Connect GPIOs from FPGA to Microcontroller UART?
  • Check SMA distance

👤 Author

  • Konrad Bode

Parts

112
QtyValueFootprintReferences
1410KResistor_SMD:R_0603_1608MetricR1, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18
9Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132134_VerticalJ6, J7, J10, J11, J12, J13, J14, J15, J16
8100nCapacitor_SMD:C_0603_1608MetricC1, C4, C5, C6, C14, C15, C18, C19
81uCapacitor_SMD:C_0603_1608MetricC7, C11, C12, C13, C16, C17, C20, C21
6SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6
55.1KResistor_SMD:R_0603_1608MetricR22, R27, R28, R32, R33
5Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J3, J5, J9
422Resistor_SMD:R_0603_1608MetricR25, R26, R29, R30
4Conn_02x06_Top_BottomSummerSchool:PinSocket_2x06_P2.54mm_HorizontalJ20, J21, J22, J23
4MountingHole_Pad_MPMountingHole:MountingHole_2.5mm_Pad_TopBottomH1, H2, H3, H4
4PESD5V0L1ULDiode_SMD:D_SOD-882D4, D5, D6, D7
31KResistor_SMD:R_0603_1608MetricR2, R9, R21
3TestPointTestPoint:TestPoint_Pad_1.5x1.5mmTP1, TP2, TP3
20.1Resistor_SMD:R_0805_2012MetricR19, R20
26pCapacitor_SMD:C_0603_1608MetricC8, C9
2DS90LV027APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU7, U8
2SW_PushButton_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mmSW1, SW2
2USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J17, J19
2W25Q32JVSSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU1, U3
2yellowLED_SMD:LED_0603_1608MetricD1, D3
11.2KResistor_SMD:R_0603_1608MetricR3
11.5KResistor_SMD:R_0603_1608MetricR31
110164227-0701A1RLF10164227_0701A1RLF:AMPHENOL_10164227-0701A1RLFJ24
110KOptoDevice:R_LDR_5.2x5.2mm_P3.5mm_HorizontalR24
110uCapacitor_SMD:C_0603_1608MetricC2
112.0MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1120RInductor_SMD:L_Eaton_MCL2012V1FB1
115KResistor_SMD:R_0603_1608MetricR23
11uInductor_SMD:L_1008_2520MetricL1
122uCapacitor_SMD:C_0603_1608MetricC3
1350mAFuse:Fuse_0603_1608MetricF1
14.7uCapacitor_SMD:C_0603_1608MetricC10
1510Resistor_SMD:R_0603_1608MetricR8
174LVC1G66Package_TO_SOT_SMD:SOT-553U4
1AP7361C-33Y5-13footprints:SOT89-5_DIOU5
1BAT54WPackage_TO_SOT_SMD:SOT-323_SC-70D2
1BSS84Package_TO_SOT_SMD:SOT-23Q1
1Conn_01x03Connector:FanPinHeader_1x03_P2.54mm_VerticalJ8
1HDMI_AConnector_Video:HDMI_A_Molex_208658-1001_HorizontalJ18
1RP2350APackage_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mmU6
1TLV1117-33Package_TO_SOT_SMD:TO-252-2U2

More from konrad-bode/SummerSchool_25

1
  • 2 layers18 × 18 mmCarrier, the printed circuit board in 3D

    Carrier

    konrad-bode/SummerSchool_25

    This repository contains the KiCad hardware design for the HeiChips 2025 SummerSchool FPGA Carrier Board, designed to interface with the custom tapeout FPGA chip from the HeiChips 2025 Tapeout Repository.

    2 parts

Similar boards

  • 4 layers107 × 17 mmE0001 fader driver, the printed circuit board in 3D

    E0001 fader driver

    Karpuls/E0001-fader-driver-board

    Motorized fader driver board (ALPS RSA0N11M9A0J clone): STM32C051, DRV8210P, touch sense, I2C

    53 parts
  • 6 layers460 × 109.3 mmReadout trenz, the printed circuit board in 3D

    Readout trenz

    Arich-Hardware/PCB

    409 parts1
  • 2 layers45 × 45 mmWolfDrive encoder renishaw adapter, the printed circuit board in 3D

    WolfDrive encoder renishaw adapter

    jonblissett/renishaw-aksim-adapters

    PCB and schematic designs for adapting Renishaw encoders for different signalling.

    18 partsGPL-3.0
  • 6 layers69.7 × 37.4 mmRadio module, the printed circuit board in 3D

    Radio module

    tmolteno/TART-3

    The TART radio telescope, Version 3.

    112 parts1GPL-3.0
  • 4 layers104.5 × 91 mmMbed ce ci shield v2, the printed circuit board in 3D

    Mbed ce ci shield v2

    mbed-ce/mbed-ce-ci-shield-v2

    New version of the Mbed OS CE CI Shield -- a shield containing a logic analyzer and components to test features like I2C, SPI, and PWM.

    176 parts7CERN-OHL-P-2.0
  • 4 layers82 × 55 mmSpark, the printed circuit board in 3D

    Spark

    ratmuds/spark

    The PCB files for this project. The gerber and other PCBA files are in the production folder.

    202 parts1
  • 4 layers50 × 50 mmPlant monitor, the printed circuit board in 3D

    Plant monitor

    PimentoFr/plant-monitor

    Developpement d'un capteur de potager indoor/outdoorn solaire et connecté via Sigfox

    208 parts
  • 2 layers52 × 51.3 mmPico HABakuk, the printed circuit board in 3D

    Pico HABakuk

    serych/pico-HABakuk

    90 partsCERN-OHL-W-2.0

Questions

How big is the SummerSchool 25 PCB?

It measures 100 × 70 mm and has 4 copper layers, 1.6 mm thick.

What parts does the SummerSchool 25 use?

112 parts, built around the RP2350A, DS90LV027AHM, W25Q32JVSSIQ and 74LVC1G66GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SummerSchool 25 KiCad files?

From the konrad-bode/SummerSchool_25 repository on GitHub, at the commit this page was made from: the board is SummerSchool_25.kicad_pcb and its schematic SummerSchool_25.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SummerSchool 25 design in my own project?

Its repository states no licence, so its author keeps all rights: ask konrad-bode before reusing the design.